The car film is too dark, I want to cut a piece to see the rearview mirror clearly, how to scratch?

Just cut off the piece that blocks the rearview mirror.

Take a wallpaper knife. Take a ruler. First, put the glass down and start cutting from the top.

After cutting a large part, raise the glass again. He cut off the underside. Or cut from the bottom and then the top.

Then use a wallpaper knife gently. the cut off piece. Tear it off and you're good to go.

Wipe clean with a rag. Lots of car films.

The darker ones have adopted this pattern.

If you feel like you're not sure. If you don't handle it well. It's best to go to a car detailing shop. Or to the car film specifically.

place. Ask the master there to help you cut it. It's just too easy for them because, after all, they're doing this work all day.

So it's easy to take care of it for you. I guess you won't be charged for such a small piece. It's just to help cut it.

This will prevent you from being careless, especially when you go to the top or bottom. Especially at the bottom. It is easy to cut the rubber on the door frame.

Once the rubber is cut out. That's not pretty. So I am not sure about the situation.

Just go and ask them to help you deal with it.

But there is a downside. It's the part of the rearview mirror that is blocked. After cutting off a triangular opening.

Whole. Front window. It doesn't look very good.

Affect the aesthetics. If you don't often drive at night. It is recommended that you do not deal with that piece yet.

This car model. After a basking sun. It's going to fade soon.

Certainly not so soon, at least a year later. The film will fade. Once the car model fades some of the colors.

It will be less dark. If you don't often drive at night. You'll be there for a while.

After a summer, the color of the car film becomes lighter when the sun shines. You won't be able to see the road clearly. During the day, the membrane is a little darker, and there is basically no problem, and you can see it clearly.

It's at night. Or when reversing. Or you may not be able to see clearly when entering the parking space, because you need to know the distance between the left and right.

Occasionally, there is a night parking and it is not clear to see. You can put: The windows are down.

Then park your car and raise the windows again. That way, you won't lose sight. After a summer or two, the color of the film will definitely become lighter.

You don't need to. Deal with that piece. Otherwise, the whole window will not look good.

Affect the aesthetics. In short, you have to look at your specific situation. If it really is. Often driving at night, it is too dark to see the signs on the left and right, the distance, etc., so it is better to deal with it.

After all, safety should be the main thing when driving out. If the car film is too dark, it is not clear to see. If you scratch the car, it will be more than worth the loss.

Hello, you can cut a three-solution or square, mark it with a triangle or ruler, pay attention; Do not hurt the door glass when cutting.

You're not going to post it all, are you? Draw a straight line on the membrane with a ruler and cut off a small piece until you can see the size of the rearview mirror.

It is not recommended to do this if it is easy to blister into the dust if it is cut after the film is applied. It's not easy to get your own tools, and the film shop doesn't accept this kind of work. The best thing to do is to lower the windows at night.

You can use a blade to cut off a piece of the front door on both sides against the mirror.

Yes, the most serious effect of too dark is that when driving at night, it is difficult to see the car and mirrors on both sides without lights. In the industry standard of "Automobile Window Glass Sunshade Film" issued by the Ministry of Public Security, there are also clear provisions on the light transmittance of the car film, in which the front windshield of the car and the part used by the driver to observe the rearview mirror must be pasted with Class I sunshade film.

The front side window film should be used as much as possible with a high light transmittance light color film, and now the vehicle management department must leave a blank 20 cm wide without sticking the film, otherwise the license plate and annual inspection will not pass. You can also use a ruler to draw a straight line on the membrane and cut off a small piece until you can see the size of the rearview mirror.

Of course, you can, cut it vertically down and then sit in the car to see if you still block the rearview mirror, and then cut it a little wider if you still block it, you have to look at the six roads when you drive, and you can't see clearly when you block the rearview mirror, which is very inconvenient.

Well, yes, if you don't think your eyesight is very good, and you often drive at night, you can cross out part of the glass film, it's just a little unsightly.

The car film is too dark to see the rear mirror treatment method, the window is cut into triangles, no need to change the film, go to the car beauty shop for treatment. Car film is a kind of car heat insulation, anti-ultraviolet film products, the most important performance of the car film related to driving safety, try not to choose the film with too low light transmittance, the window film, especially the film of the front windows on both sides, should choose the light transmittance in the stimulus of more than 35% is more appropriate.

The heat insulation film and the substrate used are clear enough, even if the color of the film is relatively dark, the scenery must be thorough, not dim or deformed.

The durability of the color of the heat insulation film, a good heat insulation film can be kept for more than 6 years without fading, and it is still as new.

The explosion-proof film reflects infrared rays, so the temperature inside the car is much lower, which in turn reduces the load on the air conditioner and saves fuel. If the owner of the car judges, the solution is very simple, just use the glass with the film to block the sun, and use your face or hands to feel the thermal insulation effect.

Explosion-proof performance: The high-quality explosion-proof film itself has strong toughness, and the film can be glued firmly after the glass is broken, and it will not splash and hurt people, and its impact resistance is very strong. The inferior explosion-proof film feels very soft, lacks sufficient toughness, is not resistant to ultraviolet radiation, and is easy to age and become brittle.

Photo by Xu Shuanghe) @2019

What should I do if the car glass film is too dark to see the rear mirror? The car glass film is too dark to see the rear mirror and press the window down: 1. When choosing the color of the car film, special attention should be paid to the clarity of the front windshield film, because the front windshield is a window to observe the outside world, the clarity of the film is required to be extremely high.

In accordance with domestic traffic laws; 2. The light transmittance of the pre-tease film should be more than 70%. Therefore, for the front windshield film, in addition to the color matching, it is also necessary to take into account the clarity, safety, and heat insulation effect, so that it is a good solar film; 3. The choice of the color of the car window mountain Yufeng film can also be based on the preferences of women and male drivers, as well as the market conditions of commercial vehicles. Commercial cars and men's preferences are more focused on choosing a dark gray film for the side tailgate position, which makes the car look dynamic and beautiful, and creates a personal private space. However, the current popular color is natural, and car owners can choose according to their preferences.

I believe that many car owners will put a layer of glass film on their cars, which can not only effectively block part of the heat from coming in, but also play an explosion-proof role to a certain extent. But some friends in the pasting after the occurrence of the car film is too dark to cause the rearview mirror to be unable to see clearly, it can be said that there are potential safety hazards, at this time there will be a question, as long as the car film cut a corner is not able to solve the problem just said, then we will analyze it in detail.

First of all, if the car film is cut to the corner, you can indeed see the rearview mirror completely, but the aesthetics of the vehicle is also destroyed a lot, because from the perspective of observation in the driver's seat, if you want to see the rearview mirror completely, then the chamfered corner area on the left side is much larger than the cover difference area on the right, after all, you are not sitting in the middle position, so the right side of the car film almost has to be cut off in half, which can be said to be nothing beautiful at all.

In general, if the car film is too dark, it can be cut off, but the aesthetics of the vehicle are also destroyed a lot, so it is best to go to the beauty hunger circle store or replace a car film with better light transmittance. Of course, if you don't want to change it, you can also do it, but you must cut the corners, after all, driving safety is the most important, as the so-called "thousands of roads, safety first".

If the film is too dark, you can cut corners. Lingna.

After the car film is cut, it will affect the appearance of the car, so it is best to change a car film with good light transmission in the car beauty shop. If you don't want to change it, cut off the corners of the car film without affecting the aesthetics of the car. After all, driving safety is the most important thing.

There are strict regulations in China's "Industry Standard for Automotive Window Glass Sunshade Film". After the front windshield and observation rearview mirror are pasted with sunshade film, the light transmittance should be guaranteed to reach more than 70%, so that the driver can have a clear vision.

From the driver's point of view, if you want to see the car's rearview mirror in its entirety, the corner on the right is larger than the corner area on the left.

If the film is too dark, it may affect the normal annual inspection, because this will not only affect the driver's vision, but also affect the driving safety of the car. Therefore, for the sake of driving safety, it is recommended that the owner replace all the car films with films with better light transmittance.

During the annual inspection of the vehicle, the inspection agency in some areas will use the transmittance detector to detect the transmittance of the car film, and once it is unqualified, it may be forced to replace.

Millions of car purchase subsidies.