Why is the middle seam of the made to order underwear crooked

1. When the inner and outer seams of the foot mouth are aligned, you can see if it is exactly the middle seam, if it is not the middle seam, it is an ironing problem. Just iron it.

2 If it is not the above-mentioned you put the trouser leg (the leg in question) inside the seam, one hand to lift the knee and the other hand to lift the foot out, with one side (the front or back of the trouser leg) facing you, to see if it is not flat, and there is an oblique fold, that is to twist the leg, is the production of the upper and lower two pieces of the amount of food is different, so you need to disassemble the trouser leg, to one side, from the foot to the knee circumference disassembled, and then the front and back two pieces are flattened If the upper and lower pieces are not the same length, it will be decided according to the length of the other leg When cutting off or sewing the foot, fold it less and sew it again. I hope my experience can help you.

1. It is a workmanship problem, in fact, there are a lot of jeans.

It's all like this, the problem of the model, you can't change it, you can only say that you should pay more attention to it next time, you can't see it in general, and you should wear it more and walk around for a while when you try it.

2. Whether it is a little brand of pants or general pants, it will be like this, or a problem of model when working.

This is related to workmanship, Haimeng clothing company can also customize pants, but my company's clothing is quality assurance, contact me if necessary.

If it's not ironed, take it to the place where you sew and mend your clothes outside and ask him to help you re-iron

There are a variety of reasons why pants are crooked, if the front and back panels are not aligned or the elasticity is not well controlled.

1.The side seam of the pants is crooked, which will make the side wrinkle and uncomfortable.

2.Turn the pants over, pick the sewing thread of the trouser leg, iron it with a iron, the crooked line will be clear at a glance, take a chalk and draw a straight line to the trouser leg (excluding the trouser leg mouth), and draw the trouser leg diagonal line in reverse, sew it up according to the drawing line, turn the pants straight, iron it flat, and pick the trouser leg.

3.You can disassemble the crooked seam trouser line and re-sew it.

4.The second is that there is a problem with the sewing pants themselves, and the pants are cut along the edge of the fabric, and they will be concave to a certain size when they are cut in order to fit the pants. However, in order to save fabric, some merchants will cut or dent the edge of the cloth very little, and the pants will be crooked.

In such a situation, you need to disassemble the pants, find the middle line according to the method of drawing in the figure, re-cut and sew, and change the wide pants to be thin, if the pants are too thin, they cannot be changed.

5.After washing, the hands are connected to the lower side seams, and after drying, the front and back pieces are compared, and the iron is heated and ironed. Simple skews can be mitigated.

If it is serious, please switch it to a sales maker.

Extended Material: Basic Washing Methods.

a. Dark jeans should be soaked in salt water for about 20-30 minutes before using white vinegar + water (white vinegar: water, 1:20) or salt water for about 20-30 minutes.

b. Dark and light colors are washed separately: mixing together will cause color dyeing.

c. Bleach shall not be used. Wash with a laundry detergent with no enzymes and blue granules, because the enzyme-added laundry detergent has a bleaching effect and has an impact on the color of the jeans.

d. Avoid direct exposure to sunlight: direct exposure to sunlight will cause serious oxidation and fading.

e. Drying in a ventilated place: not ventilating will make the pants not easy to dry and produce peculiar smells.

f. Wash and dry on the opposite side as much as possible.

Basic maintenance methods for pants.

a. Dark cotton jeans can be worn about 3-5 times or washed once a week.

b. Light color: white, khaki, camel color? It depends on the situation of the stolen goods. The best time to wash jeans is 6-12 months.

c. Use the following tips to make your new primary (dark blue) jeans imbued with a natural fade effect of your personal style, similar to second-hand pants or old-style pants.

1 Do not wash it unless necessary, as long as you can endure the odor (Takuya Kimura has not washed the jeans for more than two years).

2 When wearing on the body, rub the surface of the pants with your hands, so that the jeans can naturally oxidize the place where they come into contact with the body, resulting in fading and a slight oil ester effect.

Some tips for pants.

For unwashed primary color jeans, they can be worn after the first wash when they are not dry, which can produce lines more quickly; For jeans that have been depulped, you can simply use some cornstarch and water and spray it on the surface of the jeans to re-harden the jeans.

Pants - Encyclopedia.

There are a variety of reasons why pants are crooked:

1. If the front and back pieces are not aligned or the elasticity is not well mastered, you can disassemble the crooked trouser line and re-sew it.

2. The second is that there is a problem with the sewing pants themselves, and the pants are cut along the edge of the fabric.

3. In order to save fabrics, some merchants will cut or dent the edge of the cloth very little, and the pants will be crooked.

Solution: In such a situation, you need to disassemble the pants, find out the middle line according to the method of scribing, re-cut and sew, and the wide pants can be solved by changing the skinny, if the pants are too thin, they cannot be changed.

4. One is the problem of clothing fabrics, due to the textile method of the fabric inclined to the right, the poor quality fabric will rotate to the left after washing and desizing. Therefore, when buying pants, you must choose a regular merchant, and negotiate the return if there is a quality problem.