Sudden sound from the floor? The floor keeps ringing on its own

1. The ground is uneven.

After the floor is installed, it will make a sound when you walk on it, and the distribution area is small, which may be caused by the ground not meeting the requirements. Check the floor flatness before installing it. The ground that does not meet the standard should be leveled.

2. The floor notch is too tight and the floor nail is too tight.

The floor notches are too tight, causing them to rub against each other and produce noise; Solution: Remove all the sound parts, re-process the notch, re-install, and the problem can be solved, or replaced. The floor nails are fixed too tightly; Workaround:

The sound parts are all removed, the floor nails are adjusted to a suitable grip, and the problem can be solved by reinstalling.

3. Insufficient gaps in the floor.

We all know that there must be enough reserved gaps for the installation of wood flooring, otherwise the expansion process of solid wood floor will produce a slight arch that is difficult to observe with the naked eye, so that there is a gap between the solid wood floor and the keel, so that when walking around, the solid wood floor will rub up and down to produce a sound. This kind of noise is also very common, so in the installation of enough gap reservation, if this situation really happens, do not rush to renovate and reinstall treatment, you can generally look at the effect of the solid wood floor after moisture, if the solid wood floor is damp after serious deformation, the solid wood floor squeezed particularly tight state will not make a sound.

4. The moisture-proof film is not cushioned.

Walking around the floor while installing it may be due to the fact that the ground is particularly damp, the moisture-proof film is not tightly sealed, or the indoor air humidity is above 80%. Therefore, the moisture-proof of the ground should be done, and a layer of plastic film should be laid on the ground on the wet ground to eliminate the influence of ground humidity on the floor.

5. The symmetrical placement of heavy objects leads to the arching and deformation of the floor.

The floor can not be expanded to both sides when pressed, resulting in the arching of the floor or the lack of reserved gaps when installing the floor, resulting in the arching of the floor, when people walk, the floor vibrates up and down, and the tongue and mouth friction produces a sound.

6. Uninhabited or uninhabited for a long time.

After the floor is installed, it is uninhabited or uninhabited for a long time, the indoor air is not circulated, or the floor is flooded, resulting in too high or too low humidity, which will produce floor noise, deformation, local cracking, expansion and arching, shrinkage and separation, and other phenomena.

7. Reasons for maintenance and nursing.

The use of products that are not suitable for floor care, or floor waxes, wood essential oils, or improper care methods cause a large area of noise.

8. Common normal problems of local noise.

Normal phenomenon during the friction period; It will disappear naturally within two to four months of moving in. Generally, there will be a sound at the door, wall and other places where there are obstacles; The floor and the door sleeve do not leave enough expansion joints and the last piece of the floor is not firmly fixed, the floor and the door sleeve rub against each other and produce a sound, solution: leave the expansion joints and strengthen the floor, the problem can be solved.

Foreign objects have entered the expansion joints of the floor. Other types of work are not properly connected to the floor, and friction produces noise.

The sudden sound of the floor is due to the coolness of the weather, dryness, the current winter, the temperature and humidity of the summer have been greatly reduced, the characteristics of the wooden floor is the heat rise and contraction, the weather is cool, the humidity is small The floor must be cold and shrink, so the sound is made.

The density of the wooden floor is not very large, and some destinations will shrink and heat up under the condition of temperature changes, and in the change of cold shrinkage and heat expansion, it will cause friction and noise.

The floor of your home should belong to the kind of solid wood floor, which is generally due to thermal expansion and contraction or the sound of vibration when walking.

Sudden sound from the floor? This is a physical phenomenon of heat rise and cold contraction, because this is the sound of floor heating installed in the north, and the heating heat rises in the morning, and the floor heat rises.

This should be the sound of thermal expansion and contraction, that is, now that the heating has begun, it is normal for the floor heating floor to make a sound of thermal expansion and contraction. Isn't this a strange phenomenon?

The floor suddenly makes a sound, according to the season, the floor has the cause of thermal expansion and contraction, if the floor suddenly makes a sound, it is caused by the floor squeezing and deforming.

The floor suddenly made a sound, then when you bought the floor, he must have copied it, although after you bought it in the countryside, he slowly dried, so there was a clicking sound after Gan, and I drowned.

There are several reasons why the floor suddenly makes noise. For example, if the weather is relatively dry, the reason for the sharpness of the force between the hesitation of the floor will also occur thermal expansion and cold contraction. Wait. At this time.

The sound of the wooden floor at night may be affected by the temperature difference and indoor humidity, the temperature difference between day and night is relatively large, the temperature is high during the day, the indoor will be relatively dry, and the temperature will decrease at night, and the room will become humid, according to the principle of thermal expansion and cold contraction, the wooden floor will shrink at night, so as to make a sound.

There are several reasons why the floor keeps ringing on its own:

1) Floor reason: Some floors are not of good quality, the density is too loose, and the iron nails cannot be bitten. There is also the possibility that the moisture content of the floor is too high.

2) Floor running-in: Generally, after the new floor is installed, some of them will indeed have some abnormal noises, that is because the floor teeth are too tight, and after a period of running-in, they will basically disappear naturally.

3) Uneven ground: Before installation, due to uneven ground, after the floor is paved, there is a gap between the floor and the ground in individual places, and the floor moves up and down during the process of people walking, resulting in a sound.

There is a sound on the solid wood floor, the reasons: 1, the wooden keel below is not fixed or deformed, and there is a gap with the cement floor and the floor, and people step on it to make a sound. 2. The wooden floor is deformed, and there is a gap with the wooden keel, and people make a sound when they step on it.

3. The wooden floor is not fixed firmly, and the friction between the wooden keel of the floor and the floor is generated when people step on the floor. Knowing the reason, it is more clear how to deal with it: 1. First of all, don't rush to deal with it, and after a while so that the floor and wooden keel can be deformed as much as possible.

Lest there be problems here and there. 2. If after a period of time, you have been able to accept the sound, then it is barely okay (the decoration is actually the block, there is no need to care too much), because it is very troublesome to deal with the problem of the floor. (But if there is an agreement with the flooring dealer or the construction party before, it will be another matter, and let him deal with it immediately) 3, and the specific treatment is a way:

Dismantle and replace, reinstall and install, there is no other way. Maybe LZ is a little disappointed, but unfortunately, this is the only effective way to deal with it. For flooring, friends who have not installed, especially solid wood flooring (in fact, people who have used solid wood flooring know that it is boring, expensive and squeamish, impractical and the most easy to deform), it is best to supply materials and installation together to the seller or construction party, and then agree in writing on quality standards and maintenance responsibilities and compensation.

If you divide it into 2 companies, you know that you are in trouble after something goes wrong.

If the new paving is not paved, if it is the later stage, it is the floor problem, and there are two main problems with the sound of the floor, one; The ground reinforcement is not padded with a fixed point of more than 40 cm, the ground reinforcement is uneven, the floor is fixed with less glue and nails, and the paved floor will squeak as soon as the person walks up, two; The shrinkage joints on the floor and the side of the wall are small, and the deformation of the floor will naturally sound due to the temperature difference. When the floor reinforcements and floors are deformed, it will make a noise when people walk up and down. Generally, there is no good way, such as repairing the loose floor with nails.

1. Cause of the noise on the floor

The fastness of connection between the floor and the keel is not enough When installing, the normal contact between the floor and the wooden keel should be a plane contact, but due to the insufficient number of nails, the fastness of connection between the floor and the keel is not enough, which is easy to cause uneven stress on the floor. Therefore, when a person steps on the floor to exert pressure, it causes a slight movement and causes a noise.

2. Reason 2 for the noise on the floor:

The moisture content of the wooden keel is higher In some areas, the wooden keel is not dried and stacked in the open air at will, resulting in a large difference in the moisture content of the same batch of wooden keel. In the same batch of wooden keels, some have a moisture content of about 10%, and some are as high as more than 25%. Even if the installer finds the wooden keel very flat, the floor may not sound for the time being after installation, and in the process of use, after the moisture content of the wooden keel is rebalanced, there will be unevenness, and there will be a sound when walking on the floor.

3. There are three reasons for the noise on the floor

Improper maintenance of the floor causes the floor to be distorted and deformed Improper floor maintenance methods can cause the floor to be distorted and deformed during the usual use of the floor. For example, using a dripping mop, or water spilled on the ground without drying it in time, causing water to seep into the board and make the board distorted. In this way, the back of the floor is uneven, and the contact with the keel is not level, resulting in a loud sound.

4. Reason 4 for the noise on the floor

Changes in the moisture content of the floor, causing distortion and deformation The floor produces uneven deformation, distortion, warping and other phenomena with the dry and wet changes of the environment, which changes the accuracy of the floor groove fit, resulting in arching between the floors, and there will be a sound when stepping on it.

5. Reasons for the noise on the floor are five

The floor has not been cured after it has been laid, and it is urgent to use it After the floor is laid, there should be 12 hours of curing time before it can be used. In particular, the floor and the keel are fixed with glue, and there must be a curing period to make the glue solidify in order to be firmly linked, otherwise it will affect the firmness of the bonding and cause the floor to make a noise.

The floor makes a sound for no reason: 1. The original ground is uneven, and the uneven ground is not treated during the installation process. The method of disbanding and dissolving the clan:

Remove the floor, re-level the ground and then install 2, the installation process is not glued to the digging blue, or the amount of glue used in the installation process is small or the glue position is wrong, does not play the role of connecting or fixing the joints, resulting in mutual friction between the notches and produce sound. Solution: After removing the floor, fill it with glue and re-pavement 3. The gap around the floor is not fully reserved, or the floor mat is not sealed well, resulting in the local leakage part or overall arching after the floor expands, and the notch floats up and down to produce friction sound.

Solution: If the floor is slightly deformed due to the expansion of the floor mat due to the lack of sealing, it can be covered with glue for construction, and the local new board can be replaced if it is seriously deformed.

In daily life, many people will notice the noise of the floor, it may be because they are moving, furniture is moving, etc., but sometimes the floor will also make noise for no reason, which makes people feel confused. Let's take a look at the reasons for the noise on the floor.

First of all, the noise on the floor may be caused by changes in temperature and humidity. As the temperature and humidity change, the wood of the floor naturally shrinks and expands, causing gaps to appear between the woods, which in turn produces a loud sound. Especially in seasons when climate change is greater, such as spring and autumn, it is more common for the floor to make noises.

At this time, we can use a humidifier or ventilation to adjust the temperature and humidity to reduce the occurrence of floor noise.

Secondly, the noise of the floor may be due to a problem with the flooring material or the way it is installed. Some flooring materials are prone to deformation, such as low-quality wood flooring or laminate flooring. In the process of installation and use, due to the influence of factors such as uneven foundation or improper construction in the decoration process, the floor is easily deformed, resulting in loud sounds.

At this time, if we want to avoid the sound of the floor, we can choose a better quality flooring material, or pay more attention to the installation details of the floor.

Thirdly, the noise of the floor may also be related to the structure of the house as well as the material of the floor slab. If there are defects in the design or construction process of the house, the floor slab material is also prone to cause the ground to rattle. At this time, we can ask the construction party or housing design professionals to conduct an inspection and deal with the problem in time.

Finally, the noise of the floor can also be caused by the movement of furniture or the impact and friction that occurs during walking. If furniture is constantly moved or hit during activities such as walking or jumping, the floor can easily be affected and make noises. At this time, we should pay attention to the way the furniture moves, handle it gently, and minimize the force of impact and friction.

In short, there are many reasons why the floor makes noise, which needs to be analyzed and solved according to the actual situation. We need to deal with the noise in a timely manner so as not to have an unnecessary impact on family life.

Hello dear, glad your question The climate is dry or humid, there is a sound. Reason: The excessive drying of the climate weakens the nail holding force of the floor and keel, and the connection between the mortise and groove of the floor is loose; Excessive humidity causes the floor to expand laterally, resulting in expansion that slightly squeezes the arch and loosens the keel fixation.

Solution: If the climate is too humid or dry, you can wait until the climate is normal to observe. If there is no obvious sound, there is no need to trim it.

Sounds come and go. Reason: If you step on it somewhere, sometimes there will be a sound, sometimes there is none, this situation is mostly caused by the floor nail is smaller than the drill hole of the solid wood floor, and there is a loose gap between the male and female floor.

Solution: When installing solid wood floor drilling, the hole diameter must be smaller than the floor nail, so that the floor can eat nails.