How to transform leather shoes if they are not breathable? What to do if the leather shoes are not b

I think from my experience in making shoes, the appearance of leather shoes has not been changed, the leather material has been unable to change, it is recommended that the landlord replace the insole, switch to leather insole, leather insoles are breathable and odor-proof; In addition, change all the socks you usually wear to cotton socks, and change and clean them every day, which can change your uncomfortable shoes.

**High dry leather shoes,

There are several possibilities that leather shoes are not breathable, one is that the material of leather shoes is artificial leather; Second, the surface of leather shoes is genuine leather, and the inner lining and insole are artificial leather; The third is that the leather material coating of leather shoes is too heavy, not breathable, or the leather material that changes color, etc. It is recommended to use the first layer of leather for the inner lining and insoles, which can increase sweat absorption and exhaust, and try to wear cotton socks to increase ventilation.

I think from my experience in making shoes, the appearance of leather shoes has not been changed, the leather material has been unable to change, it is recommended that the landlord replace the insole, switch to leather insole, leather insoles are breathable and odor-proof; In addition, change all the socks you usually wear to cotton socks, and change and clean them every day, which can change your uncomfortable shoes.

The softening method is as follows:

1. Place the leather shoes flat on the table, and the skin simulates oil. Don't rush it, let the dermis absorb naturally. After 2 to 3 injections of the oil simulant, the skin will soften after natural drying.

2. If it has not become soft, then use electric heating on the bottom surface of the leather to resist the rapid wind to about 60 degrees, shake it a few times, and then simulate the principle of playing cotton, and gently pat it like a number of acres of applause, so that the inner fiber of the leather scale can get vibrate, so as to help remove the bonding of the intraskin fiber.

3. Re-epithelial simulation oil, and so on, the dermis will become soft.

1. As long as the leather shoes are touched off the leather place, and the surrounding area is cleaned, and then prepare a crayon of the same color as the leather shoes, then prepare a knife and a lighter, use the lighter to bake the knife, and then use the knife to apply the crayon ironing oil to the peeling place, wait for 2 minutes to dry and then apply shoe polish, the shoes will be the same as new.

2. This method is also simple, as long as the broken skin of the shoes is cleaned first, and then the clean egg white and shoe polish are stirred, not too thin, and then a cotton swab dipped in liquid to wipe the scratched position of the leather shoes, after the scratches are repaired, then apply a layer of egg white to fix, and then cool dry and hit the shoe polish again. This not only repairs the shoes, but also improves the brightness and makes them look like new.

3. If there is dirt on the surface of the leather shoes, it is best not to wipe it with water, because water can harden the leather and slowly lead to dry cracking. It is best to gently wipe the dirt with a soft cloth or brush, then apply a little petroleum jelly to wipe it, and finally rub the shoe polish, so that the shoes will be as shiny as new, and it can also play a role in maintaining and moisturizing the shoes.

Genuine leather shoes have pores and can be breathable, while artificial leather is not. The pores of the cowhide surface are small, round, evenly distributed and tight, the leather surface is bright and smooth, the texture is plump and delicate, the appearance is flat and the travel chain is soft, and the texture is solid and elastic when touched by hand.

When selecting, if you squeeze the leather surface hard, there will be small folds. Leather products made from cowhide can hardly be seen if you don't look closely. At the same time, because the cowhide is thicker, it is very structured to wear.

The full-grain pores are clear, fine, tight, irregularly arranged, the surface is plump and delicate, elastic and good breathability, and it is a kind of high-grade leather. The leather leather products made from this cowhide are comfortable, durable and aesthetically pleasing.

The semi-grained pores are flat and oval, irregularly arranged, and hard to the touch, and generally choose raw materials with poor grades. Therefore, the half-grain is a mid-range leather. It also depends on whether the shoes are made properly, whether the upper insole is flat, whether the heel height is symmetrical, whether the assembly is firm, and whether there is any glue opening.

When placing the back of the palm horizontally, the tip of the forefoot should be slightly raised and the palm should touch the ground, if the palm is in the air, the heel will be slumped when wearing. In addition, the color, thickness, and fluff of the same part of the same pair of shoes should be basically the same. The heel shape of the leather shoes and the overall shape of the leather shoes should be good-looking.

When the oil film between the surface of the internal fibers of the leather is destroyed or the grease is lost, the surface between the internal fibers of the leather should be re-injected with high-quality oil that forms an oil film - leather simulation oil, and the softening method is as follows

Place the hardened belt flat on the table and simulate oil on the epidermis. Note: Please do not rush and allow the dermis to absorb naturally. After 2 to 3 injections of skin simulation oil, after natural drying, the dermis will become soft.

If it has not become soft, then blow the electric hot air to about 60 degrees on the bottom surface of the leather, shake it a few times, and then use both hands to put the belt in the middle, simulate the principle of playing cotton, and gently pat it like applause, so that the intradermal fibers can get vibration, so as to help untie the intradermal fibers. Then the epithelium simulates oil, and so on, and the dermis will soften.

Other hardened leather, such as leather bags, is treated in the same way, that is, the skin is injected with simulated oil, and after natural drying, the leather will become soft. If it has not yet softened, like elastic cotton, gently pat the dermis with an elastic soft object to make the internal fibers of the dermis vibrate to help untie the fibers in the skin, and then inject the skin to simulate oil beauty until the dermis softens.

Wear it for a long time and soften naturally.

After buying shoes, you can use liquor to apply a layer on the inside of the new leather shoes and leave them for an hour or two to soften the leather. Wrap the foot grinding part with a wet towel or wet sponge and leave it for a while to soften the cortex. If none of the above works, plan ahead.

Put a band-aid on the grinding area of the foot first to cushion it. Band-aids should be changed regularly. Once the foot is worn out, it should be dealt with in time. Try to keep the wound as clean as possible. In particular, do not come into contact with sewage, as there are many bacteria in the sewage, which can easily cause wound infection.

1. The two places where new shoes are most likely to grind their feet are the heel and the outside of the big toe. Use a wet towel to cover the shoe part of the foot grinding for a few minutes, and then take a dry soft towel to wrap the foot squeezing place, and knock it with a hammer a few times to smooth the place where the shoe rubs the foot, and the shoe leather will not grind the foot after it becomes soft and flat.

2. Take a piece of newspaper, pinch it into a ball, dip it in some water, not too wet, but the whole ball should be stained with water, and then take a dry newspaper to wrap the wet newspaper, stuff it in the part where you squeeze your feet, and then seal the shoes in a plastic bag and leave overnight.

3. If the new shoes are too small and the feet are clamped, you may wish to cover them with a wet towel, and then use the shoe wedge to prop them up, so that they will be smooth to wear.

4. Before putting on the shoes, take a piece of soap (the usual candle can also be used) and apply a thin layer on the part that is in contact with the heel the most, so that the heel will become smooth and no longer grind the foot.

You can use liquor and newspaper, crumple the newspaper into a ball, put a little water in the middle of the newspaper, put the newspaper in the place you want to soften, let it sit for twelve hours, so that you can soften the cortex through the ink of the newspaper, the same method is used with baijiu, you can do this, remember not to put too much water and wine, this will hurt the cortex.

Just dip a towel in vinegar and polish your shoes until they're soft.

Newly bought shoes to rub your feet? A tip taught by a shoe store owner to solve this little trouble in 1 minute.