Tiles will produce some small flaws after a long time, what are the repair methods?

1.Floor tiles have been used for a long time, and various problems will inevitably occur. Brick detachment is one of the common problems, mostly due to construction.

Or the floor tiles are improperly aged. Because every floor tile has fallen. The situation is different, so the workaround is relatively different.

If the mortar is not loose, but the tiles are falling, it is too big. At home, you can scrape the mortar on the back and around the tile before using it. 107 glue mixed with a little cement and stirred into a paste, evenly coated on the back of the tile.

Spread a thin layer on top and press the tiles tightly.

2.If the mortar has peeled off, it is necessary to gently chisel some pits on the original base surface. After that, the mortar is mixed with 107 glue and pasted again, and a layer is brushed on the surface of the foundation.

After laying the layer, press the fallen tiles on them until the mortar hardens. If there are some pits on the surface and the wound is fragmented, it can be waxed or repaired with silicone. But first the dirt and dust inside the pit are cleaned, then the pit surface is sanded, and finally waxed or filled with silicone.

If the damaged area is a bit large, you can use a sewing machine or elastic putty powder.

Mend. Remember to clean the remaining glue on the surface after repair, and then sand it with sandpaper.

3.For example, the scratches on the surface of ceramic tiles are relatively light and can be repaired with toothpaste and toilet cleaner, which is also the easiest thing to come into contact with in our daily life. First, apply some toothpaste and toilet cleaner to the scratches, then wait 1 or 2 minutes before carefully wiping with a clean rag.

If the effect is slow, add a little wax oil and the scratches will disappear quickly. Because tiles often have scratches, in order to cope with this situation, a restorative agent specially designed to repair tiles came into being. Scratches can be applied repeatedly with a cotton swab, wiped again after half an hour, and wiped again after drying, until the scratches are visible from the side.

4.When repairing tiles, you should also use a detergent so that stains can be effectively removed. If there is ink on the surface, brush it with toothpaste, it is much more convenient to deal with.

If it is a coffee or beer stain, it can also be used to remove the stain very well with detergent. In daily life, if you accidentally sprinkle some tea leaves or stains on it, be sure to wipe it clean in time. You can't wait until it's dry.

This will also reduce the lifespan of the tiles, and it can be a bit cumbersome to repair.

You can use a repair machine, you can buy some glass glue, you can buy some caulk, you can use toothpaste, it is not a serious scratch, you can use oxalic acid, you can use oxalic acid to wipe it can also achieve the effect of repair, and actively repair it when the tile has scratches.

You can find a professional person to repair it, or you can cover it with tile paste, you can wipe it with toothpaste, or you can use some oxalic acid or restorative agent. You can also use paint or nail polish that people usually use.

Restorations can be done with restorations, toilet cleaners can be wiped, toothpaste can be used to wipe them down, nail polish can be applied to wipe, waxing can be done.

Use some transparent glue to add some small defects, wipe them with dish soap, lay some beautiful seams on the tiles, dry them with some glue drops, and paste some good-looking pattern paper on the broken parts.

Tiles are also durable after repair.

As long as people who have done decoration know that when decorating the home, it is difficult to avoid that the tiles will be bumped, or heavy objects will be hit, resulting in the cracking of the porcelain, and the cracked porcelain tiles can be repaired and restored, and the effect of the tiles after repair is the same as before the breaking.

The process of repairing cracked tiles.

First, the base layer is filled, and the repair paste is scraped and flattened.

1. Clean up the residue and dust. First of all, the first step is to use an electric joint cleaning rod to polish and smooth the tile residue at the cracked place, and then clean up the residue and debris to ensure that the tile cracked place is clean and dust-free.

2. Prepare repair cream. After cleaning the cracks in the tiles, the second step is to prepare the color of the patching paste, which is best similar to the color of the tile, or a little lighter. Remember, the color of the repair paste is darker than the color of the tile, otherwise, the color of the top coat behind will not cover the color of the repair paste, and the color difference will be too large.

3. Scrape flat and polish. After the patch is ready, use a utility blade to scrape the patch to the crack of the tile, and be sure to scrape the patch smooth. After the repair paste is cured, use 180 sandpaper for the first time, then 400 sandpaper for smoothing, and finally 600 sandpaper for smoothing.

2. Prepare the color of the topcoat, color and spray the glaze.

1. Adjust the color of the topcoat. After the base layer of the repair paste is polished flat and smooth, you can adjust the color of the topcoat, according to the color of the tile, adjust the color of the topcoat, between the two, it is best not to have a color difference, otherwise it will affect the repair effect. The color of the topcoat is too thick to spread completely, you can squeeze a drop of medical alcohol to dilute the color of the topcoat and make the color of the topcoat naturally and fully disperse.

2. Color and spray glaze. After the color of the topcoat is adjusted, you can color, when the paint color, it is recommended to use a sponge to dip the topcoat color, and then the topcoat color is stained on the surface of the base layer of the repair cream, and the coloring can be completed. Wait for the color of the topcoat to dry before you can spray the glaze.

After the glaze is sprayed, as long as the color of the topcoat is the same as the color of the tile, and there is no color difference, the tile repair is completed.

Hello dear, glad for your question, how long does the tile rotten porcelain last after repair? : The disadvantage is that the tile repair is very simple, the difficult thing is to adjust the color of the top paint, and paint the tile texture, the color and texture of the top coat, are directly erected to affect the tile repair effect. If it is usually well maintained, the tile can be repaired for 10-20 years; If you don't pay attention to maintenance, you can only manage the tiles for 2-3 years after repair.

If the tile is repaired, it is found that the paving is not very good, there are certain quality problems or other problems, you can quickly decide to remove the shovel and repavement, which is easier to deal with. If the tiles are paved for a period of time before they are found to have certain quality problems or other problems, they can be analyzed according to the specific situation, and the defects or local bonds that can be remedied by beautiful seams are recommended to be remedied.

The tiles used at home will gradually lose their luster after a long time, and there are many reasons for this situation, such as frequent walking, which wears out the nano protective molecules on the surface of the tile; Or the long-term exposure of nanomolecules and oxidation are the reasons for the tarnishing of ceramic tiles. There are many maintenance methods in ordinary times, such as cleaning with soap, regular waxing, brick joint cleaning, etc., which are common maintenance methods.

1. Why do tiles lose their luster

If we want to maintain the tiles, we need to understand why the tiles lose their luster. In addition, there are two main reasons for the loss of tarnishing of tiles, one is that the surface is worn out by long-term walking, and the other is that the nano-protective molecules on the surface are oxidized. Both types of wear and tear are inevitable for tiles, but there are some things we can pay attention to in our lives.

Especially for shiny tiles, it is normal for them to lose their luster if they are laid for too long. Usually you can wax different tiles or use tile repair agents to restore the original luster. However, when using it, you should pay attention to the time, such as waxing, once every 2-3 months.

2. Cleaning of tiles

Most of the commonly used tile cleaners are toilet cleaners, stone washing water, glass water and other substances, which are acidic, and will reduce their gloss while washing tiles, and may also make the tiles appear dark spots. This method is wrong, when there are stains on the tile, it is best to clean it with detergent or soap, which can reduce the damage to the tile and increase the service life of the tile. If it is oil or rust, you can use an appropriate amount of toothpaste to scrub it to avoid scratches on the tiles.

In addition, the middle of the tile joint should also be cleaned to avoid excessive stain accumulation.

3. Use tile repair agent or waxing

If the tile has lost its luster, you can consider using a tile repair agent or waxing to restore the luster of the tile itself. The tile repair agent itself is used to repair, and the scratches and abrasion marks caused by long-term use have a good effect on the worn tiles. Waxing is generally suitable for polishing tiles, which can increase their brightness.

Usually pay attention to maintenance and waxing, and another is not to rub things that are easy to scrape off the paint surface on the tiles often.

The daily cleaning of ceramic tiles can be cleaned with detergent, soap, etc., which can make the surface of the tile brighter. Contaminants such as tea, grease, ice cream, coffee, etc., on the surface of the tiles can be cleaned with sodium hydroxide.

Wear soft slippers indoors, and you should do hygiene frequently, you can add some salt or baking soda, fabric softener, etc., when washing the floor, which will help clean the floor.

There are two phenomena of tile hollowing. One situation is that the original brick is separated from the cement connection layer used when sticking to the wall, and the large virtual brick can be removed by taking the porcelain lightly. The second type of smart combustion situation is that the brick and cement are connected relatively firmly, and the base layer of the cement and the wall itself is hollow.

Take a small hammer and tap the surface of the tile where the hollow drum appears and listen for the sound, if the sound is crisp, it is the first case; If the sound is muffled, it falls under the second case. If there is a hollow drum between the cement and the wall base, and there are only one or two bricks hollow, it will not affect the use, and it is not recommended to replace it immediately. You can wait until the tile can be taken off and reattached with silicone.

If the entire wall is hollow in a large area, it may fall off and hurt people, so it is recommended to replace it immediately. However, it is necessary to remove the tiles of the entire wall and redo the base, as if in this case, it is recommended to ask a professional to replace it.

Summary. Dear, hello, I am glad to answer for you: what are the disadvantages of the ceramic tile repair for a long time?

Floor tiles will appear weathering, fading, matte and surface wear after the perennial wind and rain for the renovation of old floor tiles, the construction of the renovation is the use of high-quality ceramic tile renovation agents, glaze remodeling and other products, careful construction cost is low: 80% less than re-laying; Short construction period: shorten the construction period by 3-4 times; Works well:

The flatness and gloss of the ground after renovation are better than that of relaying; Floor tiles will be weathered, faded, dull and surface wear after the perennial wind and rain for the renovation of old floor tiles, and the renovation construction is adopted. There may be loose bonds and voids due to unclean air emissions. The most important thing is that the height of the surrounding floor tiles is inconsistent, it is easy to get a little higher, and it will mix the soles, so you don't need cement and sand to make up the tiles, just touch the tile glue, and try to avoid this situation.

Dear, hello, I am very happy to answer for you: what are the disadvantages of the ceramic tile repair for a long time Answer: The disadvantages of the tile repair for a long time are: the floor tiles will appear weathered, faded, dull and surface wear after the perennial wind and rain for the renovation of the old floor tiles, the construction of the renovation is the use of high-quality ceramic tile renovation agents, glaze reengineering and other products, and the cost of careful construction is low

80% cost savings compared with re-laying; Short construction period: shorten the construction period by 3-4 times; Good effect: the flatness and gloss of the ground after renovation are better than that of relaying; Floor tiles will be weathered, faded, dull and surface wear after the perennial wind and rain for the renovation of old floor tiles, and the renovation construction is adopted.

There may be loose balance gears that are not well bonded and internal hollows caused by unemitted air. The most important thing is to judge the problem of inconsistent search with the height of the surrounding floor tiles, which is easy to come out of the point and mix the soles, so do not use cement and sand when repairing tiles, it is directly to touch the tile glue and try to avoid this situation.