If the tile is pasted incorrectly, will it affect the waterproofing of the bathroom?

If you want to say that the room with the most tiles is generally the bathroom and kitchen in your house, one of these two places is for waterproof and the other is for oil stains, and they have chosen more smooth and corrosion-resistant tiles. Generally speaking, in this kind of room that needs to be tiled except for the roof, the technique of paving is very important, because the wall tiles need to be pasted here.

There is a big difference between wall tiles and floor tiles, because the floor tiles basically do not fall off, and they are very stable on the ground, but the wall tiles are not like this, and they must be fixed to avoid falling, so the master who can paste the wall tiles is also better in natural technology.

<> such an advantage is that waterproofing also prevents water seepage, because there is basically no gap in the corner of the ground, if it is the way of ground pressure wall, there is actually a little water seepage gap, that is, there may be a large amount of water seepage. Therefore, before looking for a master to paste tiles, you must first discuss, how the tile should be pasted, if the master said that you can only stick to the ground and press the wall, then it is recommended that you change a decoration master.

However, for the bathroom where the water flow is more frequent and more frequent, it is not only dependent on tiles, after all, the tiles are collaged together, it is not a complete whole, so it is inevitable that there will be water leakage, in order to prevent this situation, we should also do a good job of waterproofing before laying tiles.

Waterproofing is generally to pave a waterproof layer, this work looks simple, in fact, the technical requirements are quite high, if you get the room key after the house has done a good job of waterproofing, it is best to find a master to check the waterproofing, because some developers are not so responsible for the decoration team, so the waterproof is not good, so directly paved tiles, there is a possibility of water leakage.

Of course, the role of the floor drain is also particularly important, the better the drainage, the faster the drainage, the smaller the possibility of natural water seepage, so the ground tile should have a height difference, so that the water flow along the tile to the floor drain, if you want to detect the quality of the paving, you can throw a handful of beans on the ground to see if it is rolling towards the position of the floor drain.

This will definitely affect the waterproofing of the bathroom, because if the tiles are pasted wrongly, the gap between the times will be bad, so it must not be pasted wrong, after all, if the waterproofing is not done after the wrong pasting, then you need to pry all the tiles open and redo.

Yes, because the technology of "good tiling" can control the gap distance of each tile very well, so if it is pasted wrong, it will affect the waterproofing of the bathroom.

No, because the role of ceramic tiles is not waterproofing, tiles are only for beauty and comfort.

There is no impact. bai

Remember to do zhi waterproofing before pasting tiles, and the four facades and floors of the room must be done, and two to three capacities should be done. It is useless to do waterproofing after pasting tiles, you must do waterproofing before pasting tiles, otherwise it will leak after a long time.

It is very necessary to do waterproof tile in the bathroom, to avoid water leakage, before waterproofing, you must level the ground first, if the ground is uneven, it may have an impact on the effect of waterproofing, and it may also cause cracking and leakage caused by uneven thickness of waterproof coating.

Waterproofing has no effect on ceramic tiles, but if the waterproof construction is unqualified or the tile paving is not standardized, there will be some decoration construction quality problems in the future.

It depends on what material is made of waterproof, if it is polypropylene cloth, it will be affected, if it is K11 (cement type), there is no problem. If you have any decoration questions, you can contact Xinmeiya Decoration.

Bathroom waterproofing, the standard construction requirements are that the ground needs to be done, the wall must be at least built to make a full height, if it is a light wall, then it must be done full height.

Therefore, often in the actual construction, we are required to do a full high, as long as your waterproof layer is evenly and densely painted, then it will not affect the later tiling.

No, the bathroom wall is waterproof in meters.

It is recommended that you do not brush too thick, the wall is too thick, and it is easy for you to hollow out the tiles

The bathroom wall you said will be waterproof and high, which will affect the tiling, and this problem will definitely not be affected. Expert.

No matter how high the brush is, too. It does not affect the tiling, because it is necessary to brush a layer of glue on the wall when tiling, in order to increase the adhesion, it also plays a role in protecting the wall from alkali and preventing the tile from falling off by the wall alkali. In fact, no, the first choice depends on your waterproof material selection is very important, waterproof construction if there is a hollow drum will also have an impact, the thickness of the brick mortar can not exceed the original base surface can not run anything. The back of the bathroom wall can be waterproofed with a cement-based permeable crystalline waterproofing agent (live gum crystal).

The effect is also very good, of course, it is best to do it on the water.