When decorating, does the lighting in the basement need to be specially designed?

Need. The lighting in the basement needs to be specially designed, the brightness must be high, and the light source must be warm light.

Yes, a basement is a room where the height of the floor below the outdoor floor level is more than one-half of the clear height of the room.

Yes, because the lighting in the basement itself is not very good, and if it is not designed, it is likely to be very dark.

When home renovation, the lighting in the basement also needs to be specially designed. As a young person, you should be aware that when decorating the basement, most of them should be aware that because the light in the basement is relatively dark, the lighting in the basement needs to be specially designed. In this way, it can prevent some places from not shining light, and there are many homes that renovate basements, and more are considered that the basement is for parking.

Generally, some rural families will deliberately build a larger basement when building a basement, so that they can store some sweet potatoes and cabbage in winter. Since the temperature is cold in winter, keeping some of these foods in the basement can help to keep warm.

In today's life, you will see some people who will deliberately decorate the basement separately when buying a house. If you buy a community-type house, the basement is generally decorated by the community, but the lighting fixtures purchased by the community when decorating the basement are all voice-controlled lights. Because as long as you hear the sound or can sense the sound, it can be directly and automatically lit up, which is also through the authoritative design, in order to make the scope of basement lighting more extensive.

Because considering that the basement is dark, many people will consider buying energy-saving lamps when using lighting tools, because they think that energy-saving lamps consume less electricity. At the same time, it is also very convenient to use, and the ** energy-saving lamp will be cheaper than the lamps on the market. A light bulb is only 3 or 5 yuan, and many people can accept it.

The basement is not inhabited, so there is no need to consider too tall light fixtures.

If the basement is only designed to be lit when the vehicle is placed, many people take it into consideration, because there are lights when parking while driving. However, if you pick up something in the car, there is no light in the basement, so it will be troublesome. Try to install 2 or 3 energy-saving lamps in the basement, so that it will be very convenient in the process of use.

1. General lighting should be set up in all kinds of rooms and activity places in underground buildings, local lighting should be added to working parts such as operating tables, cash desks, registration offices, business hall shelves, offices, guest rooms, inspection rooms, etc., and local lighting can be set up when necessary.

2. Underground buildings should be equipped with normal lighting, emergency lighting, on-duty lighting and transition lighting. Emergency lighting includes backup lighting, evacuation lighting, and safety lighting.

3. Part or all of the standby lighting or evacuation lighting that can be controlled separately in the on-duty lighting.

4. Underground buildings should use high-efficiency light sources, such as fluorescent lamps and high-intensity gas discharge lamps; Incandescent lamps or tungsten halogen lamps can be used in places that require continuous dimming, prevention of electromagnetic interference, frequent opening and closing, or special needs.

5. Underground buildings should use high-efficiency and reasonable lighting fixtures, and the shape and layout of lamps and lanterns should be coordinated with the building.

6. Copper core wires should be used for lighting lines, and cables should be buried for external lines entering underground buildings.

7. The grounding form of the lighting distribution system should adopt TN-S or TN C S grounding system.

8. Lighting devices and distribution boxes should be selected products that are reliable, durable, energy-saving, efficient and moisture-proof with good moisture-proof performance, and moisture-proof and mildew-proof products should be selected in humid places.

9. Lamps and sockets, room lighting and channel lighting and Hengyi are connected from different circuits. Each single-phase circuit in the lighting system should not exceed 16a, the number of lamps and lanterns in a single circuit should not exceed 25, and the number of sockets should not exceed 10 (groups) in the super rough shed.

The basement is damp and dark. It is easy to leak electricity and cause personal hazards. So low-voltage lighting is a must. Basement temporary lighting generally uses low-voltage lamps with safe voltage, and the current will be large at low voltage, so porcelain insulated columns are generally used to install rubber sheathed cables.

If the voltage level is used in a humid place, the voltage level should be a low-voltage lamp below 24V.

Because basements are generally humid and prone to accidents such as electricity leakage, low-voltage lighting is used.

Low-voltage lamps have the characteristics of safety, explosion-proof, energy-saving, etc., and are widely used in mobile device lighting, household appliance auxiliary lighting, industrial and mining and other special occasion lighting and other fields. The standard lighting voltage is AC 220V. According to the special engineering needs, AC 127V or DC 36V, or other lamps and lanterns lower than the standard lighting voltage level may be used, which are called low-voltage lamps.

Add a protective grille or use explosion-proof lamps on the lighting fixtures to prevent the construction tools from hitting the bulbs and causing safety accidents such as electric shock.

For example, this explosion-proof lamp.

A basement is a room where the floor is below the outdoor floor level and more than one-half of the room's clear height.

Multi-storey and high-rise buildings require deep foundations, and in order to take advantage of this height, it is more economical to build a basement under the ground floor of the building, which can not only increase the usable area, but also save the backfill in the center of the house.

1. The lighting design of the basement generally uses a 36V power supply, but if you feel that the wattage is too low, you can change to a larger one and order a few more. The light source can be replaced with the light source of a low-pressure sodium lamp. You can also choose a cheaper fluorescent tube, there are also 36V, its light source is white The effect should be better than that of the bulb.

2. The basement is easy to be damp, so we must pay attention to the waterproof and anti-leakage engineering of the basement to reduce the occurrence of leakage.

The combination of indoor lighting and outdoor natural light is the ideal basement lighting mechanism, but this situation only applies to basements that are semi-underground (looking outward) or fully exposed (going outward). For all basements, the windows are usually smaller and taller, even though this helps to bring in natural light, albeit weakly. In conclusion, natural light should be introduced as much as possible.

Lighting fixtures can be used where there is no direct lighting. The entire basement should have both centralized lighting and ambient lighting.

From the point of view of basement decoration, if only gray and beige are used, the space will become dark and monotonous. Therefore, the choice of color is an important step in the renovation of the basement. Transparent and clean colors will turn your basement into an "above-ground room".

Basement colors, including furniture, carpets, flooring, and wall décor, can often be chosen from warm shades of yellow, gold, orange, and brown, as well as rust. The warmer you feel in the basement, the more your family will use it.

In basement renovation projects, the common problem is that the ceiling is too low, which makes people feel very oppressed. The color of the ceiling is usually lighter than the color of the walls, creating an enhanced visual effect. You can also consider building a coffered ceiling or soffit to add visual appeal to the ceiling.

It can also enhance the lighting of the ceiling and make the space appear higher and more open.

Artificial lighting in the basement is essential, that is, there must be one or a set of regular lighting in the basement. If you want to be more creative, you can put the regular lights behind the ceiling, or point the lights at the artwork and alcoves, or pass through frosted glass. The soft slow light produced by this indirect lighting can create a hazy and romantic basement even if there is a sense of mystery.

You can open some small windows in the basement to ventilate and make them look very natural.

This is to make some reasonable arrangements to meet such needs.

You can choose to steal light from the wall, or use an incandescent lamp to take care of it.

To create the effect of natural light, I don't think it's possible because it doesn't have windows.

In the basement, I think it's better to install glass or make a hole.

You can install a few more natural warm lights in the basement room.

My main main thing is that it is important to choose the right lamp, so you should choose the right one.

The focus is not on the windows, but on the quality of the light. There is an underground shopping mall, the top of the mural is relatively shallow blue sky, the mural is about 50 cm down the light trough, the final effect is very good, the subject can consider this way.

Brine is also a great deodorant, and putting two basins of cold brine indoors will have a noticeable effect.