How to repair the famous gas stove E3?

1.The flame is not normal.

In this case, it is very likely that the gas stove is out of the fire or out of the fire, first we can adjust the pressure of the gas stove to make its gas valve be raised, and then open it to try.

2.There was no spark.

If the gas stove does not produce sparks no matter how you hit it, it may be because the gas stove has no electricity, and the battery of the gas stove needs to be replaced. It is also possible that the rotary switch of the gas stove has been twisted, so the easiest way is to replace one.

3.Automatic flame-off.

If the gas stove suddenly goes out in the state of use, first check its gas source, and if the gas source is blocked, it should be dredged in time. If the gas stove is turned off due to an infection, be sure to turn off the gas stove first and then wipe its sensor needle with a clean rag.

4.The spark was not lit.

If the gas stove can produce a spark but cannot ignite, and both the induction needle and the ignition needle are normal, then it may be a problem with the gas source. Next, check its air supply, first test it with a lighter, and if there is a fire, move its ignition needle so that the spark is close to the edge of the hole. Another way is to adjust the damper of the gas stove, and the maintenance of the gas stove should be carried out by a professional, so as to ensure the safety of use.

No matter what brand of gas stove will encounter the situation of not playing the first, it is not a big problem to hit the first, as long as the reason is found, there is a solution, so what are the reasons why the gas stove is not the first?

There is no gas. Sometimes people are busy and forget to add gas, and they can't hit ** at this time.

2.The battery has no charge.

This is a problem that is often encountered, the battery is out of power, check if the battery is pointed, and then replace it with a new one.

3.Poor circuit contact.

In this case, most of them are caused by the wire is not plugged in properly and the line contact is poor.

4.Overvoltage protection.

Many gas stoves have an overpressure protection mechanism, once the overpressure will not be hit, this is to change a pressure reducing valve to try.

5.Pipes are plugged.

A common problem, at this time to check the gas valve, if you can smell the smell of gas and do not ignite, it is likely to be blocked, but it needs to be dredged in time.

6.The micro switch is damaged.

This fault should be repaired by professionals, and generally do not do it yourself, this work is more delicate.

7.The ignition needle is not properly positioned and the ignition needle is too dirty.

There are certain requirements for the distance between the ignition needle and the fire cover of the gas stove, once the distance deviates too much, it will cause the gas stove to hit the **, generally speaking, the distance between the ignition needle and the fire cover is 4-6mm, and it is good to aim at the fire hole;

Gas stoves that are often used and gas stoves that have been placed for a long time are easily stained by oil, so it is necessary to clean the ignition needle.

8.Aging of high-voltage lines.

The gas stove has a high-voltage line linked to the stove, and the aging of the high-voltage line will also cause the gas stove to not catch fire.

The above list of reasons why the gas stove is not playing **, may not be very comprehensive, there are other reasons, this needs to be found and solved by yourself, thank you, I hope it will be useful to you!

Generally, the three guarantees are based on the date of issuance of the invoice, the whole machine is one year, and the main components are three years.

Summary. Hello I'm glad to answer for you, E3** is an anti-dry burning device action. Causes and Exclusions:

1. When the thermostat is disconnected, the program is interrupted. At this time, you can check whether the connection cable is connected reliably, whether the thermostat is faulty, and if the thermostat operates due to dry burning, it can be reset by itself. 2. When the thermal fuse assembly is disconnected, the program is interrupted.

At this time, you can check whether the connection cable is reliably plugged and whether the hot fuse assembly is damaged due to dry burning.

Hello I'm glad to answer for you, E3** is a pure nuclear anti-dry burning device action. Causes and elimination: 1. When the thermostat is disconnected, the program is interrupted.

At this time, you can check whether the connection cable is connected reliably, whether the temperature control leather pants hole is faulty, and if the thermostat is activated due to dry burning, it can be reset by itself. 2. When the thermal fuse assembly is disconnected, the program is interrupted. When this burns out, you can check whether the connecting wire is reliably plugged and whether the hot fuse assembly is damaged due to dry burning.

Extended information: The fault corresponding to the E3 fault is the wind pressure fault, and the E3 has two phenomena, one is that after the start-up, the fan is not running, and the machine reports the E3 fault hail and silver accompaniment, and the other is that after the start-up, the fan runs first, and the machine reports the E3 fault, and the user should distinguish between the causes of the E3 failure, and the reasons for the E3 failure are mainly the following five situations: The wall-hung boiler shows the cause of the E3 failure

The electrode of the ignition of the wall-hung boiler is faulty; The second reason for the failure of the wall-hung boiler E3 is that the water pressure of the source is too low or the filter screen is blocked; The third reason for the failure of E3 in the wall-hung boiler is that the gas pipeline is blocked, resulting in insufficient gas and cannot be ignited; The wall-hung boiler shows the cause of E3 failure four:

The solenoid valve is aging and cannot let the gas pass; The reason for the failure of the wall-hung boiler E3 is five: the smoke pipe is blocked and cannot be exhausted normally;

The integrated stove is a kind of kitchen appliance product, which is different from the traditional free-standing gas stove and electric heating stove, it integrates multiple household kitchen appliances such as induction cooker, gas stove, range hood, steamer, oven and so on into one cooker, which is convenient, space-saving, and easy to clean when cooking, and is loved by consumers.

However, sometimes there is a failure when using an integrated stove, for example, an E3 failure, so what to do?

First of all, we need to understand what an E3 fault is. E3 fault generally refers to the abnormality of the detection of heating power by the control board of the integrated cooker, which may be the failure of some components such as the current head sensor, electromagnetic coil, and leakage protector, resulting in the failure of the integrated stove to heat normally. When this kind of fault occurs, we can try the following methods to troubleshoot:

1.Check if the circuit is normal. The circuit connection of the integrated stove is prone to loosening and breaking, check whether the circuit connection is normal, and tighten the loose screws.

2.Clean the solenoid coil. The solenoid coil is the core component of the integrated stove, and regular use may accumulate dust, oil, etc., resulting in poor heating effect, and cleaning the solenoid coil can solve this problem.

3.Replace defective parts. If the current sensor, leakage protector and other components fail, and the defective parts need to be replaced, you can contact professional after-sales service personnel for repair.

4.Plug it back in. The failure of the integrated stove is sometimes due to the fact that the equipment is turned off for a long time and the circuit is lost, which leads to the E3 failure. At this point, you can try to plug it back on.

In short, the E3 failure of the integrated stove is generally caused by the problem of the equipment itself, and consumers can take corresponding measures to eliminate the fault according to the actual situation, or contact the after-sales service personnel for repair. When using it at ordinary times, we should also pay attention to cleaning the electromagnetic coil regularly to ensure the normal use of the equipment.

Hello, E3: refers to the waste oil in the oil box to reach the load-bearing alarm parameters set by the machine, so the display screen alarm and display the positive stove E3, prompt to clean the oil tank, this function will not have any impact on other functions of the machine after starting. Of course, sometimes the oil tank is not placed in place, and there will be a lack of water, the water level detection plate is broken, or the water level detection float in the water tank is stuck.

The corresponding solution can be: check the water tank and add water to the tank; Overhaul the water tank, replace the water level detection board of the water tank, or pretend to be a water level detection float.

Hello! Glad to serve you, find answers to your <>

Answer: Hello, dear: First of all, we need to make it clear that the E3 fault ** is not available in all brands and models of gas stoves, but only limited to certain brands of gas stoves, so you also need to know your own gas stove brand and model when using gas stoves.

When the gas stove has an E3 fault, it is generally a reminder that we need to carry out a maintenance. So, what should we do about it? First of all, we need to check whether the power supply of the gas stove is normal, if it is an E3 fault caused by a power failure**, we can check whether the power plug, power cord, power switch, etc. are normal.

If the power supply is normal, then there may be a problem with some part of the gas stove. Secondly, we need to check if the key switch of the gas stove is damaged or if the keys are stuck, because sometimes a faulty button can also lead to an E3 failure of the gas stove**. If the key switch is faulty or the key is stuck, you can try cleaning or replacing it first.

Finally, if neither of the above is the case, then you need to ask a professional maintenance person to check the gas stove. Because the E3 is faulty**, it may be that other parts of the gas stove have a problem with the hood and need to be replaced or repaired. In short, an E3 failure on the gas stove display** is not a serious problem, but it needs to be dealt with in a timely manner.

If you can't solve it yourself, it is recommended to ask professionals to carry out royal sales maintenance to ensure the safety and comfort of our lives. If you have any other questions, you can continue to ask, if there is no trouble to give a like, the evaluation is in order management, I hope the above will help you If you are satisfied with me, please give a thumbs up <>

E3 is a fault signal of the gas stove timing switch, which indicates that the phase loss of the power saver or the open circuit of the temperature sensor is detected, and it needs to be troubled and repaired before the fault can be solved. First of all, the power saver should be checked whether there is a lack of phase, if it is out of phase, the power saver should be replaced or check whether the wiring of the power saver is correct; Secondly, you should check whether the wiring of the temperature sensor is normal, if not, the temperature sensor should be replaced. Finally, check whether the dust of the circuit board has accumulated too much, and if so, the circuit board should be cleaned in time so as not to affect the normal use of the coal god attack gas stove.

Many people have encountered the problem that there is no spark in the gas stove, and when encountering such a problem, first of all, we have to check the battery to see if the battery is still charged? If there is no electricity, you need to change the battery. Next, we press the knob to see if there is a spark, if there is no spark, it is a problem with the ignition needle, just change the ignition needle.

If the ignition needle is replaced, it is that the pulser does not work, see if the connection between the pulse and the battery box is intact, if it is intact, then it has to be replaced with a new pulser.

Another problem we often encounter is that the gas stove has a spark, but it does not ignite. We first have to check if there is gas coming out, and we can use a lighter to light it and try it. If the ignition does not ignite, we turn the ignition needle so that the spark hits the edge of the nearest small hole, and adjust the damper, because the damper is too large, the mixing ratio of gas and air is too small, and it is not easy to ignite.

Adjust down first to make the gas concentration high; After ignition, adjust the damper to the blue flame, but the bottom of the flame does not leave the blowhole.

Another common problem we encounter is that the gas stove can be lit on fire, but as soon as the hand is released, the fire is extinguished. We can overhaul from the following aspects, after ignition, after ignition, whether the fire has burned the thermocouple, if not, it is possible that the fire cover is not placed, it is possible that the small hole of the thermocouple is blocked by debris or water so that the fire can not come out, it is possible that the thermocouple is displaced or sinking, and it can be eliminated; After ignition, the fire burns to the thermocouple. It is possible that the thermocouple itself is damaged, and it can be replaced; It is possible that the interface between the thermocouple and the valve body is not in good contact.

In addition to the above problems, we will also encounter the situation that the knob of the gas stove cannot be pressed. The solution to this problem is relatively simple, generally because the knob rod of the valve body assembly is not installed in the center of the panel hole, and the bottom of the knob is stuck, and the panel can be adjusted.