How is the elevator air conditioner installed? What are the regulations for installing air condition

Step 1: After determining the location of the installation, you can install the packaging box that requires you to open the box, and if you need to follow it on the building, you need to make some simple reservations for the air conditioner.

Step 2: Fix the installed bracket, fix the installed bracket to the position reserved in advance, and then use the level for preliminary proofreading, at this time you need to pay attention to the height of the position, generally the outer side should be about 10 mm lower than the inner side.

Step 3: Remove the panel, air filter, and fixing plate on the site. In this world, the outer box of the air conditioner can be installed on the bracket, and it is necessary to ensure that the faucet can produce water normally.

Step 4: Then use a level to check whether the air conditioner is installed horizontally, at this time it should be noted that the base must be flat, if it is not installed flat, the air conditioner will produce a lot of noise.

Step 5: Install the air filter and the panel for further fixing.

Step 6: Check that some of these entrances and exits are congested and have been kept open. Then we will install some small parts, such as drain pipes, and grounding wires.

Step 7: After doing the above steps, you can try to run it, if there is no problem, the air conditioner is successfully installed.

1) Dongling elevator air conditioning has novel design and compact structure, which solves the defect of air conditioning dripping;

2) Drip-free and condensate-free design: multiple gasification treatment of condensate can effectively prevent overflow, prevent overflow and ensure no dripping; Efficient heat-insulated air supply hose, non-condensing on the outer surface;

3) The body adopts an integrated design, no refrigerant leakage, light weight and small size;

4) Low noise, using international famous brand compressor, stable performance and efficient operation;

5) Extra-strong air supply system design, uniform air supply, large refrigeration capacity, so that the car to maintain a quiet, comfortable and comfortable space;

6) Independent power supply design, does not affect the normal operation of the elevator;

7) Automatic constant temperature, energy saving;

8) In addition to the functions of refrigeration and heating, it also has multiple functions such as air supply and dehumidification;

9) Easy to install, simple to operate, safe and reliable;

10) The fuselage is made of high-quality anti-corrosion materials, which is luxurious and beautiful;

11) Remote control in the car, can be set to open and close, easy to operate;

12) Multi-layer defense purification device can effectively remove the turbid air in the car; It has electrostatic pressure collection, sterilization, mildew prevention, deodorization, fresh air and medical care. health and environmental protection;

13) According to the different styles of customers to decorate, to provide personalized luxury matching tuyere decorations.

Installed on the outside of the elevator, specifically on the elevator; There is air circulation inside and outside the elevator!

Yes. It sucks the air in the shaft into the air conditioner and sends it into the car. The elevator air conditioner is an all-in-one machine and is installed on the car roof.

Installed on the top of the car, the special air conditioner is refrigerated through the hoistway, and it has to be added every year to make heat.

The legal basis for the installation of air conditioning in elevators is: elevators belong to special equipment, such as the installation of air conditioning and other operations need to be reported to the relevant departments of special equipment, and at the same time, the installation of elevators is required to seek the opinions of elevator manufacturers and installation manufacturers.

Article 1 of the Measures for the Management of Industry Standards.

Strengthen the management of high banking standards, ensure the coordination and unification of industry standards, and formulate these measures in accordance with the provisions of the Standardization Law of the People's Republic of China and the Regulations for the Implementation of the Standardization Law of the People's Republic of China.

Article 2. Industry standards are standards formulated for technical requirements that do not have national standards and need to be unified within a certain industry in the country. Industry standards shall not contradict relevant national standards.

Coordination and unification should be maintained between relevant industry standards, and no repetition should be made. Industry standards shall be abolished after the implementation of the corresponding national standards.

Home elevators can be installed in the middle of stairs, civil hoistways, against walls, etc., no matter what position it is installed, it needs to have a vertical space. To buy a home elevator, it is recommended to choose Schindler villa home elevator. The company's moon series elevators, the designer implants beautiful metaphors into contemporary life, creating an inner and textured atmosphere, so that the car space has a long charm, full of poetry and humanistic concern.

Click Get Plan & **

The installation of home elevators should pay attention to the following aspects:

1. Vertically penetrating hoistway space.

It is especially necessary to pay attention to the installation of small home elevators when cutting floor slabs, the hole size of each floor is the same, but it is not through in the vertical space, so that small home elevators can not be installed.

2. Reserve enough pits.

Elevator installation generally requires a reserved pit. In addition to being installed in a traditional villa environment, it can also be installed in a high-rise duplex building that cannot be dug deep in an environment, which is convenient and flexible to install.

3. Reserve enough top floor height.

For safety reasons or due to the structure of the elevator itself, the elevator installation needs to reserve sufficient space for the height of the top floor.

4. Determine the location of the power supply and wiring.

Because of the different structures, the power supply location of small home elevators is also different. The power installation location of small home elevators varies.

5. The hard decoration work at home is completed.

As a kind of precision large-scale household appliances, home elevators need to pay special attention to prevent dust pollution during installation and daily maintenance. The installation of a small home elevator must be carried out after the renovation is completed.

If you want to know more about home elevators, we recommend consulting Schindler Villa Home Elevators. Schindler villa elevator contains a variety of different creative designs, rich and colorful, to meet different needs, including mirror, flower, water, moon, interstellar and other designs are breathtaking, dizzying; The visual effect is good, the quality is safe, and there is also a good reputation, which is worth choosing.

First, the existing hoistway.

At present, most newly built villas generally have a separate shaft space, which can be installed directly in the existing shaft.

Second, the middle of the staircase.

An installation location favored by the majority of owners and designers. If the size of the space in the middle of the spiral staircase reaches 1 square meter, a small elevator can be installed in the middle of the staircase, which is both beautiful and does not take up space. When the elevator shows the situation of falling ladder, power outage, trapped ladder, fire, etc., how does the home elevator avoid and solve this part of the problem?

It is a screw-driven home elevator, and the special nut and screw occlusion mechanism can effectively avoid the occurrence of falling ladders and ensure the safety of passengers. In the event of a power outage, the home elevator will automatically start the UPS backup power supply, automatically stop the elevator on the near floor, open the door, and be equipped with a UPS backup power inspection system, which can automatically detect whether the UPS backup power supply is operating normally before each elevator ride, so as to ensure that the passengers are not trapped in the elevator. If there is a fire in the room, the alarm system is triggered, and there are still passengers in the home elevator, the home elevator will automatically stop the elevator at the preset fire return floor to protect the safe evacuation of passengers.

Because the home elevator operates in a semi-enclosed upper space, the air circulation is relatively poor.

Three, next to the stairs.

If there is enough space next to the staircase, it is also a good installation location.

Fourth, install against the wall.

Flexible use of space structure to install against the wall, suitable for most new and old apartment types. After the above recommendation, I firmly believe that the big guy should have a certain understanding of the length and weakness of the screw elevator, so that the user can choose the elevator. When choosing a small elevator for a villa, the main concern becomes the safety of the elevator.

Fifth, outdoor installation.

If conditions permit, install a small home elevator outdoors, which has both good lighting and sightseeing characteristics.

Drive system: The drive system of spiral elevator, traction elevator and hydraulic elevator is different, which affects the size of the home elevator. For example, the screw elevator has no counterweight, no wire rope, and no car wall, so the installation requirements are very low, and it can be directly installed on the ground without digging pits, which does not destroy the original building structure, but also improves the space utilization.

Installation location: The installation location of the elevator will directly affect the size of the villa elevator. The hoistway installation can be selected according to the hoistway size.

Installed in the middle of the staircase The size of the staircase should be considered on the side to determine the installation size of the elevator. When outdoor installation is permitted, the size can be determined according to the number of people carried.

Door opening method: There are generally two ways to open the door, namely automatic door (side door, middle door, folding door) and manual sliding door. Different door opening methods will indirectly affect the installation size of the villa elevator.

According to the above points, we know the convenience and benefits of installing home elevators in different locations, and I hope it can help you.

Normal elevators are classified according to the location of the machine room, then the elevator with the machine room at the top of the hoistway (upper machine room), the machine room at the bottom of the hoistway (lower machine room) elevator, and the machine room inside the hoistway (without machine room) elevator.

According to the size of the car, abstract words such as "small" and "super large" are often used. In addition, there are double-decker car elevators, etc.

The scope of fire elevators is clearly defined in the "Code for Fire Protection Design of Buildings" and the "Code for Fire Protection Design of High-rise Civil Buildings", and the following five situations should be set up for fire elevators:

1. High-rise first-class civil public buildings.

2. Tower houses with 10 floors or more.

3. 12-storey and above unit houses and corridor houses.

4. Other Class II public buildings with a building height of more than 32 meters.

5. High-rise buildings with elevators with a building height of more than 32 meters.

If the home elevator is generally installed, it is installed in the handover position of the living room and the dining room, and the overall thing needs to be taken into account not to affect the other functions of the house.

The home elevator should be installed outside the house, so that the room layout will not be damaged, and it is also convenient for the maintenance of the elevator.

Modern villa design will generally design the elevator in the middle of the staircase, or next to the staircase through the floor installation, installed in the middle of the three-run staircase or spiral staircase, more space-saving, do the four-sided glass beautiful and transparent, the lighting is very good, and the sense of space is good, the elderly or children will not feel depressed when taking the elevator inside

Because the home elevator does not belong to special equipment, it does not need to be installed. Installed indoors is like ordinary decoration, but if it is installed outdoors, if it does not belong to its own area, it needs to communicate with the property, and the property needs to be agreed by the relevant departments.

If you use a home elevator, it is best to refer to the equipment instruction manual to find the location of the safety device.

Generally, the elevator will be designed in the middle of the stairs, or the floor next to the stairs will be installed, and installed in the middle of the three-run staircase or spiral staircase, which is more space-saving, and the four-sided glass is beautiful and transparent, the lighting is very good, and the sense of space is good. You can also customize the color according to the decoration style of the villa. Of course, if there is no space for indoor installation in a renovated villa, outdoor installation is also possible.

Now many pit elevators with their own shafts can do it, but it is recommended to design a larger space design that is practical and convenient.

1.If the staircase at home is a three-sided circumferential staircase, and the position of the staircase is 1000*1000, then use this position.

2.There are also many villas with stairs on both sides, so there are only other options to install elevators. If there is no suitable space at home.

3.If the staircase at home is a three-sided circumferential staircase, and the position of the staircase is 1000*1000, then use this position.

4.There are also many villa house stairs on both sides, so that there are only other options to choose home improvement elevators. If there is no suitable space at home.

I believe that many high-rise buildings will be installed in the elevator, but whenever we are in the summer, seven or eight people take an elevator when it will make you sweat for a minute, at this time many people will want to be the elevator has air conditioning. Therefore, the elevator air conditioner came into being, and the design of the people to take the elevator will not be uncomfortable in the process of riding, so that it can also better improve the comfort of people taking the elevator. Let me give you a specific introduction to the installation and types of elevator air conditioners!

1. Introduction to air conditioning in the elevator.

In fact, every time we take the elevator, we feel a cool equipment is the elevator air conditioner, which is actually installed on the top of the car, but in order to understand the condensate dripping of the royal fight, it will be evaporated twice when it is designed, so as to keep the environment fresh and clean.

2. Air conditioning installation in the elevator.

The installation of the air conditioner in the elevator only needs to be placed or hung on the measurement, which can be a good solution for us to occupy the space inside the elevator, but also to reduce the weight of the elevator inside, in addition to the installation of the need to use the force cushion, so that it can be a good accompaniment to reduce the impact of vibration.

3. The type of air conditioner in the elevator.

1. Air supply and air-conditioning system of external unit.

This system is mainly set up outside the elevator shaft, its advantage is that the structure is relatively simple, and the installation and maintenance is also convenient, and more importantly, there will be no water droplets, but the disadvantage is that the cost is relatively large, and the energy consumption is more.

2. Car overhead air conditioning system.

The air-conditioning host of this elevator is directly placed on the top beam of the elevator car, its advantage is that the refrigeration is very fast, and it is more energy-saving, and the disadvantage is that it will increase the weight of the elevator car, the installation and maintenance is more troublesome, and there will be dripping.