The construction of water and electricity is the top priority, how to do the water and electricity i

Updated on home 2024-07-04
8 answers
  1. Anonymous users2024-02-12

    Workers install exhaust fans to check whether the ventilation duct is installed and sealed. This is because some workers skip this step in order to save trouble, and then wait until you live in it, and the house will smell every day. Most of the installation methods of hydropower lines are to go to the ground, go to the wall, and go to the top.

    No matter which method, the bathroom water and electricity lines should be horizontal and vertical, mainly to facilitate the inspection and later installation of pendants to avoid hitting the water and electricity pipes, bathroom decoration, water supply pipelines are all the water pipelines in our bathroom. Regular toilets generally have running water, as well as reclaimed water. For reclaimed water, it is relatively simple, generally a reclaimed water pipe is reserved next to the toilet.

    <> waterway includes sewer drainage and water intake, drainage is simply to discharge indoor wastewater, such as bathing, washing vegetables, water after washing the face is discharged, water inlet is simply a tap water pipe, bathroom water equipment, water hammer effect is large, and the damage to the pipeline is also great. The water pipe goes to the top, which helps the water pipe itself to counteract water hammer through vibration. Water pipes and line pipes are not good to do waterproofing on the ground, waterproof is not easy to leak, in the case of water leakage, water will also enter the line pipe, the wire bubbles for a long time, causing damage to the insulating skin of the wire, and it will leak after a long time.

    Due to the heavy water vapor in the bathroom and long-term humidity, it is more appropriate to set the circuit on the roof. Lamps and switches should be protected with safety features, and joints and latches should not be exposed. It's best to keep the switching power supply outside the bathroom.

    Now the commonly used water pipes are almost all PP-R pipes, these pipes are divided into cold water pipes and hot water pipes, regardless of cold water, hot water is recommended friends all use hot water pipes, high standards and high specifications of materials, construction is also convenient.

    For the design and construction of water and electricity in self-installed toilets, since the design is the owner and the plumber master, the construction is the plumber master, basically relying on the master's experience to position, to meet the demand. And it has a protective effect on the internal leakage of the toilet and the external leakage into the bathroom, and is the most important safety barrier for the toilet circuit.

  2. Anonymous users2024-02-11

    Bathrooms are the most watery and humid places, so use waterproof materials and try to stay as far away from the floor as possible.

  3. Anonymous users2024-02-10

    For the design and construction of self-installed toilet water and electricity, since the design is the owner and the plumber is the construction, it basically depends on the master's experience to locate and meet the needs. Moreover, it can protect the internal and external leakage of the toilet, and is the most important safety barrier for the toilet circuit.

  4. Anonymous users2024-02-09

    The water and electricity in the bathroom can be put on the wall as long as the wiring is placed, because if the water and electricity are not handled well, it is easy to connect to electricity. This must find a mature renovation team to decorate.

  5. Anonymous users2024-02-08

    Hydropower construction is very important, how to do water and electricity when decorating the bathroom? Needless to say, hydropower construction, in our family's new house decoration status is very high, as long as the water and electricity are installed, the entire home decoration is half completed. In the construction of the whole water and electricity, which room is the most important?

    The answer must be the bathroom, the water and electricity in the bathroom is the most important, so what to do with the specific toilet water and electricity? I'll leave it to you now.

    Hydropower construction is very important, how to do water and electricity when decorating the bathroom? In the unified decoration plan, most of the water pipes are on the ground, because of the company's regulations and the preferences of workers, so many owners do not know the principle that water pipes can go to the ceiling.

    Hydropower construction is very important, how to do water and electricity when decorating the bathroom? It's not that walking on the ground is bad! In view of the fact that the quality of hydropower materials is relatively passable, the quality of water pipes can be extended to 70 years, as long as the construction is carried out according to the requirements and standards, and the quality materials are used, there will generally be no water leakage and electricity leakage.

    The water pipe is on the ground, which is easier from the perspective of pipe installation, and it can also save some materials. This is great for owners who are strapped for a tight economy, and it is better to save a little bit.

    Hydropower construction is very important, how to do water and electricity when decorating the bathroom? Of course, there will be certain risks: in case of water leakage at the interface of the ground water pipe, not only is it not easy to be found, the maintenance company is also quite troublesome, and the later maintenance has to destroy the ground tiles and even wall tiles, and what is more terrible is that the ground waterproofing may be damaged!

    Even if the repair is completed in the later stage, it is inevitable that such a thing as "soaking" will occur in the long-term use in the future, and the already indifferent neighborly feelings may inevitably hurt the harmony. Therefore, the premise of choosing water pipes to go to the ground is to ensure the quality of water pipes and construction.

    Therefore, whether it is to go to the ground or to the top, it has its own advantages, and it is worth reminding that no matter which scheme is adopted, it is not 100% that nothing will happen! Your choice should also be based on your own circumstances.

  6. Anonymous users2024-02-07

    When decorating the bathroom, water and electricity should actually have waterproof materials and be paved more.

  7. Anonymous users2024-02-06

    When we decorate water and electricity, we must go to the top, and we must leave as many sockets as possible, one behind the washbasin, and one under the toilet, so that it will be very practical in the back.

  8. Anonymous users2024-02-05

    If the decoration cost is abundant, you can go to the ceiling when you take the water and electricity lines in the bathroom, not the ground, which is more convenient for maintenance and inspection, if it is more tight and want to save trouble, go to the ground, but the maintenance is relatively troublesome.

Related questions
21 answers2024-07-04

Workers install exhaust fans to check whether the ventilation duct is installed and sealed. This is because some workers skip this step in order to save trouble, and then wait until you live in it, and the house will smell every day. Bathroom pendants, whether to install glass partitions, as well as lighting, heating, exhaust requirements, these are to communicate with the decoration company, workers to make a good disclosure, otherwise it is time-consuming, laborious and expensive to modify, and it also leaves the hidden danger of destroying the waterproof layer, and the positioning of the functional area is very critical. >>>More

18 answers2024-07-04

What should be done about the waterproofing of the bathroom? >>>More

8 answers2024-07-04

Bathrooms are painted with waterproof paint.

Construction method: The first step is to lay the foundation, smooth the ground and wall with cement, and dry it to make the wall and ground free of water, ash and oil. The second step is to apply the primer, with the aim of increasing the adhesion of the base surface to the waterproof coating. >>>More

10 answers2024-07-04

The bathroom is the most difficult to take care of at home, which items in the bathroom should not be done? >>>More

10 answers2024-07-04

Personally, I think it is better to use plastic material for the water retaining strip in the shower room, because the plastic water retaining strip is a very economical and durable material, and its material is very simple and fast to install, and the most important thing is that its sealing is also very good. Moreover, the shower room of some bathrooms is designed with different shapes, and plastic water retaining strips are used, which can change with the change of the glass edge of the shower room.