How to fix a leaky toilet storage tank, how to fix a leaking toilet tank

1. First of all, open the water tank of the toilet bowl and see what level the scoop inside the water tank is at when it is full. If the water inside is full and the tank is still flooding, then there must be a leak coming out.

2. Use water to pull the card position of the water scoop up and down, and the sensitivity of the water scoop is not smooth, or it is difficult to move, then it is announced that the water scoop equipment has failed. Remember to press the ladle down a little bit, not too high.

3. You can remove the equipment of the water scoop and clean it, if you don't know how to disassemble it, just put dry water in the water tank directly, and try it with dish soap and washing powder. If you can do this, you can continue to use it, if not, you need to replace it.

4. Check the interface of the stainless steel hose at the position of the water tank outside the water tank to see if it is not tightened or the rubber pad inside is aging and causing water leakage. This must be ascertained.

5. If the internal equipment is fine, then it is also necessary to check whether the water tank of the toilet has the problem of cracking caused by impact, and if there is an external force, the water tank may also have the problem of water leakage.

1. Leaking water from the toilet lid is a common problem, so don't worry too much when this problem occurs. First of all, we can open the lid of the toilet bowl to see what position the horizontal line of the internal scoop is when the toilet bowl is full of water. If the inside of the lid is already full of water, but the water does not stop entering the lid, then the lid must be leaking.

2. In this case, we only need to pull the water scoop inside the lid up and down. Then look at how sensitive the water scoop is, if the water scoop is very unsmooth and difficult to move, then you can conclude that the water scoop equipment is faulty, you can press the water scoop position down a little bit, lower a little bit and not too high.

3. Or we can try to remove the scoop equipment, if there is a leakage of the lid, it may be because the scoop equipment is blocked, you can take the scoop equipment out and clean it. Then put it back in and check if it leaks, and if the leakage improves, you can ignore it. If you still leak after cleaning the scoop equipment, then you should consider replacing it with a new scoop equipment.

4. In addition to the tax evasion caused by the problem of the water scoop, it may also be due to the problem of the stainless steel hose that receives water on the outside of the lid. You can check the interface to see if it is because the interface is loose or the interface is aging. Find out if it's internal or external, and replace it if it's a problem with the interface hose.

The hose of the interface will also deteriorate after a long period of use, and it can be wound with waterproof tape or replaced with a new one.

Answer: Dear Drip first turn off the water source, then remove the water stop cover of the water drop assembly and clean the foreign matter on the water stop cover in time, if it is aging or damaged, replace the water stop cover. Then use a Phillips screwdriver to remove the special-shaped nut, replace the new special-shaped nut and tighten it, then drain the water in the water tank below the downspout and add a dark solution to the remaining water to observe whether there is any leakage at the flush port. Finally, take out the water closure valve from the water tank, clean the leather cushion at the thimble and install it in.

Dear drops have specific steps,

1. The problem of water tank material: the material of the water tank is not good or the internal parts of the water tank are old, due to the rapid start of the toilet industry, in the face of the broad market prospects of the toilet, many small manufacturers produce some inferior materials of the toilet tank mixed into the toilet industry, in order to seek more benefits, they choose inferior materials to produce the toilet.

This kind of toilet usually can't see its quality on the outside, but there may be some small parts inside that are not used, and it is easy to be damaged, of course, it is not excluded that it is a toilet tank that has been used for a long time, and it will age and deteriorate if it is used for too long, which is a natural aging process, and its product quality is understandable.

2. Toilet sewer pipe problem: The leakage of the flush toilet may also be due to the problem of the sewer pipe below, which is a pipe that mainly connects the toilet tank to transport water, and the possibility here is also very large.

3. The drain valve of the toilet: the drain valve of the toilet is mainly in charge of the water of the toilet tank, generally speaking, in many cases, it may make the toilet drain valve have problems, there may be cracks and deformations in the installation holes, or a series of reasons caused by uneven and uneven installation surfaces and inattentive installation.

Second, the solution.

1. For the problem of water tank material, the best solution is to separate the toilet tank, one by one to check whether the parts in the toilet tank are in good condition, if some parts are broken, can be repaired, it is best to replace the one that can not be repaired, if it is too inferior to the pumping tank, it is more rotten, it is recommended to replace the entire water tank, so as not to bring more serious consequences.

2. The solution to the problem of toilet sewer pipe is to carefully check the interface between the toilet and the sewer pipe, whether it is loose, or the pipe is rotten, at this time, if the pipe is rotten, you need to replace the pipe, if it is, it is not connected, you need to use some wire or the like from the outside to buy some materials that can fix it, and fix it.

3. For the problem of the drain valve of the toilet, this is a bit complicated, because it is designed to be tested by many professional tools, it is recommended to ask the workers who repair the toilet to carry out professional maintenance, so as to ensure the normal use of the toilet.

I hope it can help you, I wish you a happy life, and I hope you can give a thumbs up, thank you! 

Hello question, thanks.

Toilet problems are the most headache, especially things like toilets, once there is a problem, the bathroom or the whole home will have a bad smell, so that people are unbearable, for such a situation, it is necessary to find a professional person to solve the situation of toilet leakage, especially how to deal with the problem of toilet tank leakage, this is what many people are concerned about, and how to deal with it is the most important, because things like toilet are more special, so in this case, It is better to choose a professional to deal with it more conveniently.

Generally, how to deal with the leakage of the toilet tank, most of the time is because of some problems with the equipment in the toilet to control the water, or it is used for a long time, and the toilet pumping device is somewhat loose, so that it will cause uncontrollable water leakage in the use process, and the serious water will always leak, resulting in a large amount of water waste.

In the process of solving how to deal with the leakage of the toilet tank, we should pay attention to it, don't know how to pretend to understand, many parts themselves are loose or aging problems, as long as they are disassembled, clean them, or directly put the water in the tank clean, because there are many water tanks, because there is a long-term lack of cleaning problems, resulting in blockage in such a situation, you can continue to use after repairing and cleaning.

In the process of inspection, press and hold the boiling water port of the water tank to see if there is abnormal water leakage, and in the hose part of the interface, the internal rubber pad is not because of long-term use, there is an aging situation, and it is necessary to replace a new rubber pad, most of the toilets are in use for a year, maybe because the quality of the rubber pad is not up to standard, so there will be such a situation, as long as a rubber pad is replaced, the normal use of these toilets can be guaranteed.

Look at the ** leakage, is the water level high overflow, or can't be closed. The high water level is that the float valve cannot be closed, and the height is lowered. If it can't be closed, the gasket can't be sealed, or there is something dirty, so flush it several times. If you can't do it, just change the handle, there are some for sale, and it's not expensive!

The tank at the seat of the flush valve should be checked to see if it is plugged with the ball plug, as the debris in the water may prevent the ball plug from being able to move to a suitable place, or the ball plug itself is broken, so that the water will flow from the direction of the flush valve's opening into the bucket tank below.

Generally, the float switch is broken, and it is enough to replace it with a pair.

The water is drained clean, and then made up with plastic steel soil.

Steps. 1. Check the position of the horizontal line in the toilet tank; Steps.

2. When the water in the toilet tank is full and the water tank keeps flooding, it means that there is a problem with the toilet tank; Steps.

3. Pull the scoop up and down to see if the scoop is faulty; Steps.

Fourth, the position of the water scoop needs to be adjusted. Steps.

1. It is easy to detect when the toilet tank is leaking, and when you find that the toilet tank is leaking, you should check the position of the scoop in the toilet tank as soon as possible, and observe whether the horizontal line position of the scoop is within the normal range; Steps.

Second, put water into the toilet tank, observe whether the water in the tank will stop when the water is full, if the water tank has been flooding, it means that there is a problem with the water tank, check the relevant parts in the water tank, and eliminate the problem; Steps.

3. You can pull the position of the water scoop in the toilet tank up and down, the water scoop is not very smooth to pull up, and it is not easy to move when pulled up, it may be that the water scoop of the toilet is faulty; Steps.

Fourth, you can press down the position of the water scoop, the position is not too high, you can remove the water scoop for inspection, and clean it in time when the water scoop is blocked. If it is a leakage caused by a problem with the drain valve, it is necessary to repair the drain valve in time to avoid water waste. When the toilet tank leaks, it should be repaired in time, otherwise it will increase the waste of water resources and bring a lot of inconvenience to everyone.

With the continuous improvement of living standards in our country, most families have begun to use toilets, which is a very good sanitary product, which can make us more comfortable when cleaning toilets. So, how to fix a leaky toilet tank? What are the causes of a leaky toilet tank?

Let's take you to find out.

Open the toilet tank lid first, Lu Xin observes the situation inside, if it is caused by the blockage of the water scoop, then directly remove it and clean it, and then install it. However, if the toilet tank still leaks after cleaning, it means that the scoop has been damaged and needs to be replaced with a new scoop.

Causes of a leaky toilet tank.

1. For toilet boxes with inferior materials, water leakage may occur after a long period of use. In order to reduce production costs, some manufacturers use poor quality materials to manufacture water inlet valves, water inlet pipes and other accessories, which will affect the sealing of the water tank, resulting in water leakage.

2. When buying a toilet, many people pursue the shape of the toilet too much, and ignore the accessories in the water tank and choose miniaturized accessories. In the process of use, when the water is not over the float, the water inlet valve will not be closed, and the water will continue to flow into the tank, eventually causing water leakage.

3. There is another situation that causes the toilet tank to leak, which is caused by the improper design of the water tank. If the design is not handled well, then the various accessories in the tank will interfere with each other when working, and eventually cause it to leak. For example, when the water tank is discharged, the float and float rod inside will affect the reset of the flap when falling, which will cause water leakage.

Article summary: The above is all about how to repair a leaky toilet tank and what are the causes of a leaky toilet tank, I hope it will be helpful to you. If you want to know more about it, please stay tuned to Qeeka Home.

1. Open the toilet tank lid first, and observe the situation inside.

2. If it is caused by the blockage of the water scoop, then directly disassemble it and clean it.

3. Then install it after touching the source. However, if the toilet tank still leaks after cleaning, it means that the scoop has been damaged and needs to be replaced with a new scoop.