I want to ask everyone, how to deal with the sloping wall in home decoration?

I think that if you encounter a sloping wall in your home decoration, you can tear it down or design it as a wardrobe.

You can paint in that position to add to the aesthetics of the sloping wall and not look so obtrusive.

You can make a row of cabinets inside the sloping wall, so that you can increase its storage function and look good.

The more fundamental method is to tear it down and build a new wall.

Add support to the original wall, e.g. with wooden sticks or cement pillars.

Other than that; The reason for the tilt of the wall: the aging of the wall or the serious asymmetry of the force on both sides of the wall.

1. Residential quality assurance certificate.

The quality level, warranty scope, warranty period and warranty unit verified by the project quality supervision unit are listed, and the real estate development enterprise shall bear the warranty responsibility for the commercial housing in accordance with the agreement of the residential quality assurance certificate.

2. After the delivery of the commercial house, if the purchaser believes that the quality of the main structure is unqualified, he can apply to the project quality supervision unit for re-inspection. After verification, if the quality of the main structure is unqualified, the purchaser has the right to check out; If losses are caused to the purchaser, the real estate development enterprise shall be liable for compensation in accordance with the law.

3. At the same time, the judicial interpretation of the Supreme People's Court.

It also stipulates that if there is a quality problem in the house delivered for use, the seller shall bear the responsibility for repairing it during the warranty period; If the seller refuses to make repairs or delays the repairs within a reasonable period of time, the buyer may make repairs on its own or by entrusting others to do so. The seller shall bear the cost of repair and other losses caused during the repair period.

1. If the wall can be chiseled, the plastering and leveling treatment should be carried out after chiseling.

2. If the deviation of the wall oblique is relatively large, soft package treatment can be considered.

3.You can make a wall cabinet along the inclined plane, and straighten the wall, because the room must be square, and the feng shui is auspicious.

When the wall is tilted, different treatment methods need to be taken according to the specific situation. Here are a few common workarounds:

1.Create a pitched roof: If the entire house is sloping, consider creating a pitched roof. Special construction techniques and materials can be used to create a perfect roof structure to solve the problem of slope.

2.Correction with wooden boards: If there is no problem with the structure of the house, but the walls are slanted, you can use wooden boards to correct the walls. Thin the board with the appropriate thickness, adjust it accordingly on the wall according to the inclined waxing angle, and finally fix it with nails or screws.

3.Filling gaps: Sloping walls often create gaps that can be filled with caulk or logs. The caulk penetrates into the crevices and becomes solid, and the logs are melted with a welding torch and poured into the crevices, filling the entire gap and smoothing the wall.

4.Reconstruction: If the wall is too sloping to fix the problem, then it is time to rebuild. Problematic wall sections can be dismantled and rebuilt. When rebuilding, it is necessary to find ways to support the wall to ensure that the wall is no longer tilted.

1. If the wall can be chiseled, the plastering and leveling treatment should be carried out after chiseling.

2. If the deviation of the wall oblique is relatively large, it can be considered for soft package treatment.

3.You can make a wall cabinet along the inclined plane, and straighten the wall, because the room must be square, and the feng shui is auspicious.

The more fundamental method is to tear it down and build a new wall.

Add support to the original wall, e.g. with wooden sticks or cement pillars.

Other than that; Reasons for wall tilting:1Wall aging 2The force on both sides of the wall is seriously asymmetrical.

Within 3cm, it can be leveled with plaster and putty in the later wall engineering, if it exceeds 3cm, it is a civil engineering problem, and it is best to find the developer to change the whole. If you want to deal with it yourself, you need to use cement mortar to level it, and then carry out wall engineering treatment.

It can be leveled. Do not worry.

The small slope of the batch putty leveling the large batch of cement.

When decorating a new house at home, there will be many different processes. Among them is the construction and renovation of the wall. Many people are not satisfied with the type of the new house will carry out the demolition and modification of the wall, which will affect the subsequent construction, so we need to pay attention.

Let's take a look at how to deal with the wall slope during decoration, and the precautions for wall demolition and new construction during decoration.

1. How to deal with the wall slope during decoration.

When decorating, it is found that the wall is tilted, which is a more serious problem. If it is found before the wall is treated, then it is up to the developer, it is a quality problem of the house, and the developer needs to give the owner a reasonable explanation. If it is found after brushing the putty, the better solution to the wall is to use plaster and putty to do another leveling.

2. Precautions for wall removal during decoration.

1. Confirm the condition of the pipeline before dismantling and modification.

The demolition and modification of the wall can not be carried out directly, but should confirm the condition of the pipeline in the wall in advance, confirm that the wires in the wall have been de-energized and the pipeline is cut off, and confirm that there is no condition before the construction can be carried out.

2. Treatment of wall cracks in demolition and reconstruction.

If cracks appear on the floor slab or other walls during the demolition process, the demolition of the walls should be stopped immediately and the remediation of the walls should be carried out. The builder and the designer need to work together to find a solution before proceeding.

3. Dismantle and modify in order.

When dismantling and renovating the wall, it should be carried out in a top-down and symmetrical order, and it is not allowed to demolish several layers at the same time, nor is it allowed to cross vertically. The holes in the working surface should be closed. After one part is dismantled, reinforcement measures should be taken in time to prevent the other part from collapsing.

3. Precautions for new wall construction during decoration.

1. Avoid overweight of new walls.

Considering the load-bearing problem, the new walls are generally made of lightweight partition walls and relatively lightweight materials are used. If you need to build a wall that is both large and heavy, it is necessary to go through the approval of the original design department and the property.

2. New commonly used materials.

The new wall of home decoration is generally a lightweight brick partition wall, a skeleton partition wall, a finished wall plate partition wall, etc., which is composed of a non-load-bearing lightweight inner partition wall, such a structural wall is thin, small in weight, and has the functions of sound insulation, moisture-proof, fireproof, etc., and only plays the role of partition and does not bear weight. Let's take a look at the three types of partition walls that are commonly used.

3. Pay attention to crack prevention.

The outside of the new wall should be hung with barbed wire before plastering the cement, so as to increase the stability of the wall and the outside tiles, and avoid the cracking of the new light wall and the falling off of the plastering layer.

There are several steps to deal with the slope of the wall of the new house.

Step 1: Observe the inclination of the wall.

If the wall is not tilted too much, then you can consider choosing some simple treatments. If the degree of inclination is relatively large, it is recommended to consult a professional architect or a construction escort team to avoid unnecessary troubles and costs.

Step 2: Deal with the wall foundation.

After observation, if it is found that the cause of the wall tilting is that the foundation is not strong, it is necessary to carry out foundation treatment. Foundation treatment begins with determining the type of foundation, whether it is a foundation or a raised base. If it is a foundation, it can be poured concrete or reinforcing steel can be laid; If it is a pedestal, it will need to be raised or replanned.

Step 3: Use the wall vertical lines to make adjustments.

During construction, it is common to take a verticality measurement of the walls of a new house. If you find a place where the wall is sloping, you can use a vertical line to adjust it. While adjusting, be very careful to avoid unnecessary damage to the wall.

Step 4: Choose the right decoration materials.

In order to make up for the unevenness caused by the tilting of the wall, you can consider choosing some suitable wall decoration materials. Decoration materials such as wallpaper, tiles, and stone can effectively solve this problem and add more beauty and style to the house.

In short, dealing with the problem of wall slope in new houses requires us to understand and observe the actual situation of the house structure and wall, and consult professionals to come up with a more reasonable and safer solution. In the renovation process, the correct handling of the problem of wall tilt can not only increase the quality and value of the house, but also bring a better and more comfortable living environment to the occupants.