How to change the tips when the waist of the clothes is big?

Method. First, the back waist plus elastic band method.

To put it simply, it is to cut a gap on the inside of the waist waist, <> and then stuff a section of elastic band into it (you can buy a special threading needle to wear the elastic band, or you can use hairpins or something).

Then a sewing at both ends is fine.

Method. Second, the suture waist method.

This one is relatively simple and crude, that is, the waist is folded up and <>

Sewn on. <>

Symmetrically, sew the other side on the other side, and you're done.

Method. 3. Direct seam elastic band method.

This is suitable for lazy people, put the elastic band directly on the back of the waistband, and sew it <> both sides

If you want to make the waist smaller, you can add a pleat at the waist, or a bow flower at the waist, or make an inward fold with a loose wide tight band.

Of course, it can be changed to smaller, the T-shirt is relatively simple, the chest and waist can be modified in equal proportions, the size of the general collar does not affect, if the proportion is not more than 5 cm of the tile, you can not modify the sleeve length.

1.The size of the garment itself is slightly larger, and it can be sewn deeper.

2.The tailor needs to determine the size of the deep seam of the garment according to the size of your body.

3.If you need to make something more delicate, you need to remove the original thread, re-sew the edge, and re-sewn it.

Determine how much fabric to collect according to your waist size, and then start from the armpits, put away the excess fabric evenly, and sew it with fine stitches.

First of all, you need to cut the small strap in the middle of the waistband of your trousers, and then prepare needles and threads to sew it together, and the first stitch should be sewn from the inside out. Then a small strap is the center, sew it in this symmetrical place, and then pick up about half a centimeter to thread it out, and then thread the needle back to the left and sew it back, also about half a centimeter upward. The same method is sewn all the way to the end, and then the stitches are tightened.

Pay attention when pulling the thread, you can't pull it hard, you have to sort out the thread one by one, slowly tighten it, and sew up the small bag.

Prepare the needle and thread, put the reverse side of the button outward, make two marks with reference to the waist side button, step down the needle from the reverse side, sew back and forth into a ladder shape, pay attention to the height of both sides, sew to the top and start to tighten the thread, and add a few more stitches to the bulging place.

You're referring to the large edges of the garment, and you can either insert a few small pleats evenly on the bottom of the garment, or put two elastic bands on the left and right sides of the underside of the garment.

If you can't use needle and thread, or if you are in a hurry, you can also use a pin directly to pin it to the waistband of your trousers, which is the easiest way.

If you are good at sewing, fold a few folds at a certain distance between the waist, and the waist should not be so big.

You can sew the elastic waist to make it smaller, or pinch the waist elastic.

If the waist of the pants is large, you can make it smaller, and you can use the following methods:

1. If the pants are not too big, within the controllable range, you can buy a belt.

2. You can change the waist circumference of the pants to a smaller size: first measure your waist size, then measure the size of the waist of the pants, and then subtract your actual waist size, you can see how much the pants are bigger, and then you can change the waist circumference of the pants to a smaller one. Tuck the excess inward on both sides of the pants and sew more in the process of sewing.

In the process of sewing, the line should be smooth, and it should not be closed suddenly, which will look too abrupt.

3. Add straps: make two straps of the same color and material as the pants and sew them on the waistband of the trousers.

How to make your pants bigger:

1. First turn the pants to the back and use scissors to cut the waistband of the pants at the back.

2. Seal the cut place with a needle and thread, and finally lock the edge, and you're done.

Rubber band: The way to not change the size is to find a way to button the pants, you can use a rubber band to circle the buttons of the pants, and then put the rubber band into the hole on the other side of the pants, wait until the rubber band passes through this eye, then pull it back, and then buckle it to the button.

What should you do if the waistband is small when you buy pants, and you want to make the waistband bigger, let's explain the trick of changing the waistband of the pants to a bigger one. <>

Method 1

Chalk down your small position. It is a symmetry that should be drawn on the left and right sides of the pants to avoid asymmetry after the pants are sewn. After the drawing, sew it in the inside of the pants until ** you decide for yourself.

It should be sewn tightly, and it should be sewn until it feels like the thread will not break. Once sewn, you can cut off the excess. To determine how much to change, if you change more, remove the waistband of the pants first.

Fold the trousers a little more, and then sew the waistband. If not much, fold it out at the approximate position of the trouser pocket.

Method two

1. Remove the three trouser rings behind the trousers first, and the front and left two do not need to be removed. 2. The waist circumference is only removed from the back piece, and the front piece does not need to be removed. 3. Remove a section of the bone line on both sides.

4. The side bones on both sides are reduced, because the waist circumference is small, of course, the side bones must also be reduced, otherwise the waist circumference will not go up. 5. Mark and stitch the part to be changed. 6. After suturing, cut off the excess part, or not, and put it again to prevent obesity in the future.

7. After changing the waist circumference, change the interface, which is just under the trouser ring, so that you can't see that there is an interface.

The main principle

Fold a small section slightly inward on both sides of the waistband according to your own needs, and then sew it up, and the side seam and front and middle seam can be sewn into a few centimeters. <>

Step 1

1. Prepare the required tools and materials.

2. Disassemble the waist of the pants and unpack the elastic band.

3. If there is no elastic band, use rag strips instead, cut a rag strip suitable for the length with scissors, and then fold it into a cloth strip with the same narrow elastic width of the pants, and sew it with a sewing machine. This makes it stronger and less likely to curl.

4. Sew the two ends of the sewn strip of cloth on both sides of the elastic band.

5. Tidy up the waist of the trousers, fold the edges, and complete the sewing. The beautiful pants are remodeled.

Tips for changing the waistband of the trousers from small to big:Tools: a rubber band, a box of needles and threads, and a pair of scissors to unfasten the button.

1. Method 1.

1. Unfasten the button.

Unbutton the middle of your pants and take a rubber band.

2. Thread the rubber band through the buttonhole.

Slip the rubber band over the clasp and thread the rubber band through the buttonhole.

3. Put the rubber band on the buckle again.

After passing through, fold the rubber band backwards and put it on top of the buckle again.

2. Method 2.

1. Find the middle of the pants.

Find the middle of the back of the waist of the pants and use scissors to cut the area.

2. Thread the needle and thread.

Thread the needle and thread and thread the needle from the bottom to the top through the edge of the cut trousers.

3. Repeat the steps.

Wear it around the hem of the pants and from the bottom up, repeating until all the positions are sewn.

The waistband of the pants is bigger, and the small trick is changed**Tools: needle, thread, scissors.

1. Measure the size of the waist of the pants to be modified, and mark it.

2. Jeans and casual pants can be sewn with needles and threads at the seam of the pants, as long as it does not affect the appearance, how to sew it.

3. If you can't use needle and thread, or if you are in a hurry, you can also use a pin directly to pin it to the waistband of your pants, which is the easiest way.

4. The best way is to add elastic, cut the double-layer waistband, slowly get the elastic in, and then sew it up.