What should be paid attention to in winter decoration, please home improvement professional team. It

Is winter interior decoration good?

In the past, many interior decorations were not done in winter, but with the continuous upgrading of materials, winter decoration can now be seen everywhere! What's even more unknown is that there are many advantages to winter decoration! What are the advantages?

First, wood is not easy to crack and deform in winter.

In winter, the dryness of wood is the best, the moisture content is much lower than that of other seasons, the finished product made of such wood is not easy to crack and deform, coupled with sufficient indoor heating, before painting, the potential problems of wood will be quickly exposed, so that it can be repaired in time, so that the painted wood or furniture can maintain its original appearance for a long time.

Second, it does not affect the paint spraying in winter.

According to experts, the paint cannot be painted when the temperature is lower than minus 5 degrees, and in the northern winter, every house has heating, and the indoor temperature is suitable, so there is no need to worry about the construction quality of the paint.

Due to the strong wind and sand in winter, it is easy to attach dust to paint and paint when it is not dry, so attention should be paid to choosing windless weather for painting, so as not to affect the surface texture.

Clause. 3. Understand the winter construction tips.

According to the builders of Jane Eyre, each season has specific decoration techniques, and winter is no exception, so as the owner of the house, you should know a little more.

1. Carpentry work should be seamed.

Appropriate construction gaps should be set aside. When laying a solid wood floor, an expansion joint of about 2 mm should be set aside around it, otherwise it will cause bulging and suspension; When making furniture, it is necessary to leave an interface seam of about 0 1 mm to avoid deformation.

2. The putty should not be scraped too thick.

Because the indoor air is dry and the water loss is fast, the putty before the oiler can not be scraped too thick, otherwise it is easy to cause hollowing, cracking, and wall inequality.

In short, it will be easier to find a lot of problems that are not usually seen in winter interior decoration, which is convenient for timely maintenance, because there are few places where there are generally problems in decoration, such as walls and plumbing! Winter decoration will solve these problems very well! Tianjin Jane Eyre fashion design summary provides.

The first is the temperature, pay attention to the thermal insulation treatment, some paints, mortars or something, 0 degrees will deteriorate, the strength will be problematic, so Dongshi must pay attention to thermal insulation at night. Second, pay attention to ventilation, if harmful substances will be strong such as home, wood, paint, etc., pay attention to ventilation, which is not good for the body. It is to ventilate during the day and keep warm at night.

Of course, it's fire and theft.

<> "The following details should be paid attention to in winter decoration.

1. The inlaid tiles cannot be cold or hot.

It can't be cold because the temperature is too low and the cement is not easy to solidify, so you must add a coagulant and keep warm when mixing the cement; It can not be heated because if it is the floor heating when inlaying the tiles, it must be turned off, and the floor heating has a great impact on the tiles, which can easily cause hollowing.

2. Remind carpenters to consider thermal expansion and cold contraction.

The image of winter decoration carpentry is not large, if there is no function is to do carpentry work, you need to prompt the master to expand and shrink quietly, and you need to leave a little more gaps.

3. Scrape the white paint.

Hanging white paint is a relatively high temperature requirement, and the temperature is lower than 5 degrees in spring, and construction must not be allowed. Scraping putty does not need to be too thick, the humidity in the north is low and easy to dry, the putty is too thick and easy to hollow, try to dilute the paint and brush it several times.

4. Ventilation after winter decoration.

Due to the low temperature in the north, it is not recommended to use all-day windows for ventilation, and it is best to open windows for ventilation during the day and close them at night, which will not affect ventilation and will not freeze and damage the water pipes due to low temperature.

Strictly control the room temperature: it is strictly forbidden to stack materials at the vents during winter construction, such as sliding doors, windows, doorways, etc., and when the windows are closed, it is forbidden to carry out volatile engineering projects, such as painting, etc., so as not to cause poisoning.

Use antifreeze with caution: In winter decoration, other methods should be used as much as possible to solve the problem of antifreeze. For example, in the construction of masonry engineering, "early-strength Portland cement" with strong frost resistance can be used, and the proportion of cement in the configuration can be increased.

Huaye Hongtu designer once mentioned that due to heating, closure and other reasons, indoor pollution in winter is more serious, and different ways should be taken according to the degree of pollution. First of all, keep the room fully ventilated; secondly, plants can absorb harmful substances, such as aloe vera, yueji, etc.; Again, under the guidance of experts, instruments and equipment can be selected for air purification and harmful gas removal to prevent secondary pollution or damage to materials and furniture, and room environment testing can also be carried out after decoration, which is very important to ensure the health of the living environment.

The key to winter decoration is in terms of materials, after the purchase of various decorative materials, we must put them in use for a few more days, so that all kinds of materials can thoroughly adapt to the indoor temperature and humidity. Due to the cold outside, all kinds of materials will form water beads or moisture to varying degrees when the temperature is higher than their own. After the use of such materials, there will be deformation, excessive expansion, poor pasting, poor solidification, etc.

For example, the wood cube with too high water content is even frozen (because the wood cube is not much dry now). River sand with frozen blocks or ice crystals.

There is nothing to pay attention to, if you want to change the heating, remember to say hello to the property in advance, in fact, it is very good to install it on New Year's Eve in winter, and make the putty before the end of the year, if there is a problem after the heating in the coming year, you can find it in time and deal with it in time, such as cracking, etc.! If it's no problem, just polish it and paint it's done! And the furniture can basically be done, which saves time!

Winter is coming, the climate is relatively dry, if the decoration material selection is not enough attention, the process control is not good, it is indeed easy to appear small cracks, especially gypsum lines, wood products and insulation walls. Gypsum line is generally spliced, if you choose a gypsum line with a higher water content when you buy it, it can not be revealed at the beginning of the decoration, and after a period of time, as the temperature rises and the air dryness rises, the joints of the gypsum line are easy to crack. The reasons for cracks in wood products are also relatively similar, one of the characteristics of wood is that "when the tide is swollen, it is easy to crack when it is dry", if the wood with a high water content is selected at the beginning, and the corresponding sun-drying treatment is not carried out, after being made into furniture, it is easy to crack in a dry environment.

Therefore, in order to avoid cracks in gypsum lines and wood products, it is necessary to pay attention to the selection of materials with low moisture content when selecting materials.

As for wall cracks, they are generally easy to appear on insulation walls and construction holes, which are mainly problems with the basic structure. After the building is built, there is a process of natural settlement, and the earth's crust is always in motion, although it is difficult for the human body to feel, but the changes from moment to moment will still affect the building, and the building displacement. The insulation wall and the main structure are not completely integrated, so when the building is displaced, it is easy to crack the wall.

To prevent the cracking of the wall, you can only pay attention to the wall treatment during the decoration, and the wall with not very serious foundation problems can be reduced by pasting the base cloth; For walls with serious structural problems, sticking base cloth may not be able to solve the problem, so you have to resort to gypsum board, but the cost is relatively high. It is difficult for ordinary families to understand the problem of structure, so when decorating, it is best to paste the base cloth on the insulation wall and the sub-household wall, and paste gypsum board if the family conditions permit. In this way, it is basically possible to prevent cracks in the wall.

Special reminder. Once a crack appears, if it is not particularly severe, it is best not to repair it immediately, because with the arrival of heating, the temperature is rising, the air is getting drier and drier, the crack has not yet reached the maximum value, and if it is repaired immediately, it is likely that new cracks will appear. Therefore, it is recommended that after the heating is stopped in the spring of the next year, all the cracks have appeared, and they have also reached the maximum value, and then repair them.

If the materials and processes of the repair are fine, then the problem of these small cracks can be completely solved.

There is also the problem of heating running water.

When decorating the home, in principle, the heating pipe is not moving, if it involves the alteration of the heating pipe, it must pass the community property department to carry out a pressure test to prevent the later run. However, even if there is no problem in the construction process, the problem of heating running water cannot be completely avoided, because the sand holes and trachoma in the pipe fittings, interfaces and other parts are difficult to appear in a short time, and they must be revealed after a period of use, and they can only be selected as much as possible to avoid such problems.

Special reminder. In addition, when testing the water before heating, it is best to have someone at home, once there is a problem, solve it immediately, prevent a large area of water from running and expanding the loss.

Is there heating? What is the indoor temperature?

The cover image is from behance

When it comes to winter decoration, most of the owners and friends may be worried, worried, worried.

Because most owners will worry that the winter is too cold will affect the quality of decoration, so they will choose to decorate in spring and autumn. However, plans sometimes fail to keep up with changes, so if you choose to decorate in winter, what should you pay attention to?

1. Pay attention to the temperature !! Note that the indoor temperature is not lower than 10, because the minimum construction temperature of most decoration materials is above 5, for insurance, try to control the temperature slightly higher.

2. It is not suitable to paint the walls and ground in windy weather, that is, oil work. Because at this time, the construction of Qingsha will affect the paint effect.

3. The putty before the oiler should not be scraped too thickly. Because the indoor air is dry in winter, the moisture is lost quickly, and if it is scraped too thickly, it is easy to cause hollowing, cracking, and uneven walls.

Shoot the empty drum picture.

4. Decoration materials should not be placed in the open air. Cement should be protected from freezing; Wall tiles and floor tiles must be paved only when the indoor temperature rises slightly; Painters are required to seal the wood as it is transported into the construction site. If it is not timely, the wood in winter is prone to brittleness, affecting the aesthetics and its service life.

5. "The weather is dry and dry, be careful of the candle". The old saying still needs to be heard, the winter is dry, and fire prevention measures must be taken. Flammables should be kept away from all items; Try not to pile up decoration garbage and clean it up quickly; Place clean water in a free place indoors (in order to increase air humidity, try to place it as much as possible).

6. Carpentry work needs to be seamed!! This must be noted, because of the thermal expansion and contraction, so the construction in winter needs to leave a proper gap. For example, when laying a solid wood floor, leave a gap of about 2 mm around it; When making furniture, leave a gap of about millimeters; When decorating, the door gap should not be too small.

These are to prevent deformation or other undesirable consequences caused by the expansion of the wood in spring and summer.

Renderings of the decoration, from behance

Having said so much, let's talk about the benefits of winter decoration, in fact, winter decoration is not all disadvantages, pay attention to the above matters, or there are other benefits. For example, winter decoration is the off-season, and looking for decoration at this time will not only be cheaper, but also the quality of service will be higher haha; Material quality issues are also easier to identify because of the dry air and low temperatures.

Usually materials in other seasons will have problems in about 2 to 3 months, but in winter, the special climate will speed up the identification time.

As for the house inspection after the decoration is completed, try to choose it at noon, because in winter, the night of dawn, the black group is also early, and the light is the most abundant at noon, at this time the house inspection is the most appropriate.

Today I told you about the common sense of winter decoration, and it is also considered that there will be some pot friends in Yujian Prefecture who can only choose to decorate in winter for various reasons. Don't worry too much, pay attention to the above, decoration in winter can not only save money but also get unexpected good decoration results.

It's not winter now, it's time to decorate, and the big renovation companies have already started.

A complete guide to winter decoration.

In people's inherent belief, construction is not suitable in winter. Therefore, every winter, most families who are anxious to move out as soon as possible are anxious for the cold winter to pass as soon as possible and decorate their new homes in the spring of the next year. The great opportunity for decoration was wasted in this way, and in fact, winter is the best season for decoration.

What are the steps for winter renovation? A: In three steps!

Step 1: Design and material preparation phase.

Step 2: Construction Phase.

Step 3: After the renovation is completed.

Four suggestions for home renovation in winter.

Suggestion 1: Strictly control the room temperature.

Tip 2: Use antifreeze with caution.

Suggestion 3: Decoration materials do not have to be "heated".

Suggestion 4: Pay attention to construction safety.

There are several issues that need to be paid attention to in winter decoration of the home.

In winter, attention should be paid to leaving appropriate gaps.

13 notes can not be missing.

Winter decoration: ask for cheap and good quality from home decoration.

Winter is not suitable for decoration, mainly because the cement is not good, the strength of the water pipe is frozen and cracked, and so on.

In fact, winter is the best season for decoration. Due to the harsh construction conditions in winter than in other seasons, there are many unavoidable problems in winter construction. Since the spraying work of the paint must be above minus 5 degrees Celsius, the temperature has a greater impact on it; The climate in winter is drier, and the concentration of paint increases, which is not easy to paint; In the winter decoration, because the plate itself is in a shrinking state, if the installation is too dense at this time, the plate will heat up when the temperature is hot in summer, and if the joint is too small at the time of construction, it will cause deformation in the future because there is no extension position.

Although there are some disadvantages to winter decoration, there are also factors that are suitable for decoration. As long as it is handled properly, the strengths and weaknesses are avoided, and some problems that are prone to winter decoration can be successfully decorated and perfectly decorated in winter. The main manifestations are:

In the current decoration materials market, due to the constraints of the best factors, there is almost no real drying wood, the wood moisture content in winter is the lowest, the degree of drying is the best, and the wood is not easy to crack and deform in this season.

Winter does not affect the paint spraying. The quality of the paint directly affects the final effect of the decoration, because the baking of the indoor heating in winter makes the air dry, the paint dries quickly, which effectively reduces the adsorption of dust particles in the air, and the paint effect is the best at this time.