Tips for cleaning tiles quickly and cleanly, how to wipe tiles quickly and cleanly

Updated on home 2024-07-13
6 answers
  1. Anonymous users2024-02-12

    Add dish soap and alkaline surface to water, and wipe the tiles with a soft cloth to show that the tiles are clean and labor-saving! Please give me my advice!

  2. Anonymous users2024-02-11

    When the tiles are dirty, they can't be wiped clean with water, and the cleaning aunt teaches a trick to wipe them quickly and cleanly.

  3. Anonymous users2024-02-10

    Most people use tiles when decorating their homes, because they are easier to clean and more beautifully decorated. However, the tiles are easy to become dirty and yellow after being used for a long time. So how do you wipe tiles quickly and cleanly?

    1. Prepare a bottle of white vinegar, dish soap, board brush, toothbrush and scouring pad.

    2. Pour a cup of white vinegar and half a cup of dish soap into a heat-resistant glass container and mix well.

    3. Put the mixed solution in the microwave and heat it for two minutes, then take it out.

    4. Use a toothbrush dipped in a little solution to scrub back and forth on the tile, then replace it with a board brush and scouring pad for scrubbing, and finally wipe it clean with a clean rag.

    What are the maintenance skills of porcelain without mold bricks.

    1. When wiping the tiles, use soap and a little ammonia and turpentine to make the tiles more shiny.

    2. Polished tiles should be waxed at intervals of 2-3 months.

    3. If there are scratches on the brick surface, you can apply toothpaste to the scratches, and then wipe them with a dry cloth to repair them.

    4. Pollutants such as tea, coffee, beer, ice cream, grease and other pollutants on the tiles should be cleaned up with sodium hydroxide or potassium bicarbonate solution.

    5. Ink, cement and other pollutants on ceramic tiles are cleaned with dilute solutions such as hydrochloric acid and nitric acid.

    6. Use special cleaners for paint, coatings and other pollutants on ceramic tiles.

    7. The rust on the tile can be washed with 2% oxalic acid solution, and then wiped with water. You can also use 3-4 vitamin C tablets to grind into powder, sprinkle on the surface of the floor tiles, and then scrub with water several times to remove rust stains.

    8. All kinds of glue on the tile can be removed with banana water, pure banana water is a colorless, transparent and volatile liquid, with a strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as a solvent and thinner for painting.

  4. Anonymous users2024-02-09

    Tips for cleaning tile dirt include using an old toothbrush dipped in a little stain remover to wipe the stain, treating it with a soft, dry cloth, shoveling it with a shovel or using a steel wool ball to clean it first.

    1. Use an old toothbrush dipped in a little decontamination paste to wipe the stains, and it is best to use a brush brush to apply a waterproof agent tape after wiping to prevent water seepage and mold growth. It is best to rinse the soap stain on the tile with warm water first to dissolve the soap stain and then use a brush to gently wipe it off. For stains that are difficult to remove, drop a few drops of sulfuric acid or hydrochloric acid solution and let it sit for a few minutes before wiping.

    If the oil is too thick, we will use a shovel or steel wool ball to gently wipe the stain and then use an acidic or solvent detergent to clean it.

    2. For the general stains of the tile wall, you can use a soft dry rag to deal with it, and if you encounter the stains that must be cleaned with water, it is recommended to use a rag that is soaked and wrung out to no dripping. It is best to open the doors and windows immediately after cleaning to allow air circulation and dry the moisture and moisture on the tile wall. In the humid weather in summer, you can wipe it again with a dry cloth, and then turn on the air conditioner to dehumidify.

    3. If the oil stain on the tile or the gap is really thick, you can use a shovel to shovel it first, or use a steel wool ball to clean the shed first. Once the stain has thinned, clean with an acidic or solvent-containing detergent. Paste anti-grease stickers on the tiles with heavy oil stains, use beauty cream in the gaps of the tiles, and apply them to the joints of the tiles, which are both beautiful and oil-resistant.

    Tile care precautions:

    After laying the tiles, it is necessary to keep the tiles clean, and there are a few things that the tiles are most afraid of, first of all, sand, sharp nails and other sharp things.

    The nails are easy to understand, many people don't understand the sand grains, the sand grains are very small and irregular round, we are easy to roll on the surface of the tiles after picking them when we walk, plus our weight, we can see how much friction there is. It was not clear to the naked eye at the time, but in fact, a grinding mark had formed on the surface. In future use, it is easy to hide dirt and dirt, and it is not easy to clean.

  5. Anonymous users2024-02-08

    1. Add half a bottle of water to a plastic bottle, and add half a cap of laundry detergent or laundry detergent.

    2. Add one cap of flour and two caps of white vinegar to the bottle.

    3. Add three caps of alcohol to the bottle, then shake the liquid inside, and spray the cleaning solution on the tile to clean.

    4. The first servant uses white vinegar and baking soda powder to clean, spray white vinegar on the tile joints, and then smear with edible baking soda powder, wait until the foam disappears, wipe it off with a rag, and the dirt will disappear immediately.

  6. Anonymous users2024-02-07

    For the person responsible for cleaning up and all kinds of cleaning at home, it must be very important to clean the floor tiles and other common decorative materials, after all, the scope and frequency of use of floor tiles are relatively large, and for the home, there is a certain decorative effect, if not cleaned up, there is still a certain impact on life and mood. So, what is the best way to wipe floor tiles quickly and cleanly? Next, let's find out together!

    Floor tiles can be appropriately added with some dish soap or soapy water and other cleaning supplies, so that they can be cleaned quickly, or add an appropriate amount of ammonia and a little turpentine to the soapy water and stir evenly.

    Floor maintenance tips.

    1. All kinds of floors need to be dusted frequently.

    No matter what kind of floor it is, it should be cleaned frequently, such as using a broom or vacuum cleaner, especially in some places that are often trampled on, and also pay attention to the hallway and the walkway leading to the outside, and in order to prevent dust from entering the house, you can prevent dust mats at the entrance, or install dust strips at the bottom of the door.

    2. Dry is better than wet.

    When operating, in order to avoid the ground wet, be sure to wring out the mop before use, the effect is better, too wet mop Kai wither, when in use, water will seep into the joints, hurt the floor, resulting in floor warping and deformation, especially wood floors, plastic floors, cork floor tiles, in addition to the amount of wax to be appropriate, if the coating is too thick, the dust will be more likely to stick to the floor, more difficult to polish the floor.

    Conclusion: The above content is about what is the magic trick for wiping floor tiles quickly and cleanly? I hope it can help you. I believe that after the introduction of the content, you will have a better understanding of the floor maintenance skills, and if you have any needs in the future, you can refer to the content to see.

Related questions
15 answers2024-07-13

1. Dish soap, soap, etc. can be used for daily cleaning of ceramic tiles. >>>More

6 answers2024-07-13

As follows:

1. Wipe the dust first. Cleaning the glass is skillful, do not go up to wipe the dust with water, that will only cause the glass to be more and more dirty, for the dirtier glass, you should first wipe off the dust with a dry cloth, if there is more dust around the window edge, use cardboard to wipe down. >>>More

6 answers2024-07-13

1. Kerosene or liquor:

When the glass or glass mirror on the window has old traces and oil stains, you can use a cloth or cotton to drip a little kerosene or liquor, and gently wipe it, it will be smooth and bright. >>>More

8 answers2024-07-13

When the glass or glass mirror on the window has old traces and oil stains, you can use a cloth or cotton to drip a little kerosene or liquor, light. >>>More

7 answers2024-07-13

Here's how to wipe the floor tiles bright and clean: >>>More