How do you color a tank model? How to color tank models

Updated on amusement 2024-07-12
13 answers
  1. Anonymous users2024-02-12

    What kind of paint does LZ use?

    Acrylic can be diluted with water or special thinner, and the appropriate concentration can refer to the experience of predecessors, and then pen or spray;

    Special model oily or water-based paint needs to be diluted with their own special thinner, and then sprayed or painted, personal feeling that the undiluted paint concentration is too large, a little feeling in the paste (that is tangled), it doesn't matter if there are flaws in the paint cover, and then paint it, a good model paint is very thin after drying, as long as there is no thick to the feeling of "paste" in the process, it can generally reflect the details of the original plate well.

    In addition to the primer or specially modulated paint number, it is rare to paint directly without modulation, after all, the physical environment is not.

    First, the scene is different, wind and rain, man-made war damage will bring countless diversity to the color, it is really interesting to study carefully, I believe that the landlord will soon become the "light and shadow magician" in reality.

  2. Anonymous users2024-02-11

    The suggestion is to adjust it on the board first, if it is not on the board, the paint on the pen is not easy to grasp, and the color will be a little discordant when applying.

  3. Anonymous users2024-02-10

    I'm used to mixing and coloring on the board, but I'm playing with GUNPLA, so the principle is pretty much the same.

    I've seen it painted directly by dipping it in paint. However, it is not easy to grasp the color tone in this way. After all, good colors are tuned.

  4. Anonymous users2024-02-09

    Here's a post, it's a digital camouflage livery!

    You can take a look at it in detail, **lush, and hand-colored.

  5. Anonymous users2024-02-08

    Green: If you are painting at one time, you can consider using a pen to paint, but it is recommended that you buy an air pump and an airbrush, which is much more convenient, ** around 1000. Without further ado, first of all, the fake group is completed, and the whole is sprayed with water to fill the soil, and after drying, it is mixed with Tamiya XF-5 green and XF-57 apricot gray, with 3:

    1. Spray the whole car. Then you can paint camouflage, camouflage is more difficult to paint with a pen, practice well, sand yellow with Tamiya XF-55, XF-57, XF-60, XF-3, XF-4 mixed to get, brown with XF-64 mixed with a small amount of XF-57 to get, note that the edge of the camouflage block has a gradient.

    It's better to use oil-based paint, a little more professional, just buy a spray pen and an air pump, if you are not too persistent, buy a single spray can, car paint can is also good, and then you can't always have a toothbrush, just be careful.

    Try to spray a little thinner, spray a few more times, pay attention to ventilation, I hope it will help you.

  6. Anonymous users2024-02-07

    It is best to use non-corrosive materials, the pattern is arbitrary, you can use a marker pen to mark first, and then color, pay attention to the color layer can not be too thick.

  7. Anonymous users2024-02-06

    Cover it with a paper shell, little by little, that's all.

  8. Anonymous users2024-02-05

    Hello! 1. Use desert colors for monochrome, such as 2 in the Iraq War, it is recommended not to use self-spraying paint, buy a can of pigment and paint it with a brush.

    3. Acrylic paints are OK, but oil paints can't! Tamiya model paint is not expensive, and it is recommended to use special model paint to play with desert color theme color.

    4. Model paint and soil repair are needed for aging, and it is necessary to wash the stain (the cost is high, it is not recommended, only for reference).

  9. Anonymous users2024-02-04

    Cheap coloring is hand painting, but it requires a lot of skills, anyway, you can be considered to be doing fun, so it should be practiced.

  10. Anonymous users2024-02-03

    Give the model on.

    There are two ways to color: pen and spray.

    The so-called pen painting method is to use a special brush for the model version to color, adjust the paint to a certain thickness, and use the cross method to color the surface of the model, and try to eliminate the pen marks.

    There are two so-called spraying methods: one is can spray paint, which can be sprayed directly on the model, and there are special can spray paint for the model; The other is to use an airbrush, which must be powered by an air pump to spray.

  11. Anonymous users2024-02-02

    1.Clean the surface of the model, anti.

    It comes off after stopping the source!

    1.Clean the surface of the model to prevent the paint from falling off later.

    2.Apply the base color first, pay attention to his thickness, not too thick, slightly thinner! Allow to dry 3And then it's time for the secondary color! Color according to personal preference, or model requirements! Allow to dry 4On the matte!

    5.Old.

  12. Anonymous users2024-02-01

    On the model, you can choose between pen painting bai and spray color. Brush painting is to use du brush (there is a special brush for the model) to color, adjust the paint to the thickness of milk, cross dao cross drawing, try to eliminate pen marks. There are two kinds of spraying, one is can spray paint, the other is to use an airbrush, the can spray paint directly (there is a special model of can spray paint), and the airbrush must be sprayed with an air pump as a power.

    Generally speaking, the effect of the airbrush is definitely better than the brush, but it costs a lot of money to buy the spray pump equipment.

  13. Anonymous users2024-01-31

    Spray paint. 1. Classification by type: manual painting and automatic painting.

    2. Classification according to the variety of car paint: alkyd paint, acrylic paint, water paint.

    The standard of painting can be divided into two different capacities of 200 and 400ml according to the volume (European Paint USA standard).

    3.According to the brightness, it is divided into high gloss (also called bright light), semi-matte, and matte (also called full matte).

    The unit of paint gloss is degrees: bright 90 degrees, 50 degrees, semi-matte 70 degrees, matte 30 degrees. It is often interpreted as a fraction of light, and in general, a bright light is a nine-point light, a semi-matte light is a five-point or six-point light, and a matte light is a three-point light.

    The difference between glossy and matte in the formula is mainly that matte powder (also called matting powder) is added to the matte paint, which causes diffuse reflection on the surface of the paint to achieve the effect of matting. High-brightness lacquered furniture will be more beautiful and bright, with high gloss, smooth and smooth. However, it is easy to leave obvious marks after contact with people or other objects, including indoor dust, which looks dirty and needs to be cleaned frequently.

    Furniture with low-brightness lacquer will feel less of the above, but it will look darker.

    In addition, most of the brightness paints are PU (polyester) in nature, and the paint surface is very hard, as long as the paint is fine, it will not be easy to wear and tear, let alone crack. 1.Compressed air is used to spray the paint into a mist and apply it to the object to be painted. (including plastic, wood, metal).

    2.Automatic painting is to pour paint and gas seal into the jar for easy transportation and preservation. It's very easy to use.

    3.How to use acrylic paint:

    a.It is recommended to choose according to the size and quantity selected, for the same color of the same work, it is best to choose the same batch of products, so as to avoid regional color difference.

    b.Before spraying, it is recommended to select similar products for simulation tests. to achieve the desired effect.

    c.Before use, shake the product up and down evenly for 2 minutes, using the built-in glass bulb to stir the paint and gas together. for best results.

    d.Press down the nozzle 25-35cm away from the spraying surface, move the spray paint can evenly to achieve a spray paint belt, spray up and down, and produce a spraying surface.

    e.After use, if there is a surplus in the tank, it must be sprayed backwards, that is, the tank body is upside down and sprayed 2 5 nozzles, in order to use gas to clean the remaining gas in the pipeline, otherwise the product will be blocked after 1 hour and scrapped.

    The spraying process is divided into three coats, three bakes, one uv, two coatings, two baking, one uv, one coating, one baking, four coatings, four baking, and powder coating three coatings, three baking, and one UV: it is the first primer, which is used to level the material, and then spray the color paint, which is the same paint as the primer, and then spray the topcoat, the topcoat is a transparent paint, and the UV is a special topcoat baking, that is, UV paint Two coating, two baking, two uv, is no primer, one coating, one baking, one UV, is dedicated to the coating model Four coatings and four baking are specially used for spraying glass fiber materials, and powder coating is for metal shells and other models.

Related questions
21 answers2024-07-12

The rubber track has a joint, and it can be used directly. >>>More

5 answers2024-07-12

Depending on what kind of paint you use, if it is Tamiya water-based, basically do not use it, if you use Tamiya oil-based, or Junshi oil-based, or even domestic paint, you must do a good job of protection, wear a mask, if possible, it is best to use a filter mask with filtration.

7 answers2024-07-12

1: It is best to use a green cover for seamless, because of the strong fluidity, not only to do seamless when you just enter the pit, but also to occupy a small part is also very good. >>>More

20 answers2024-07-12

This means that the painting brush cannot be used under the current settings (if you can't draw directly, you need to click on ASSIGE EditTextures). >>>More

14 answers2024-07-12

800, 2000 good water sandpaper sandpaper, and then find a good paper towel with Tiangong finish polish, you must use finish this level. Grind hard, feel the heat and squeak sound, absolutely mirror highlight.