The car is less than a year old, and the wipers are not clean

If you find that the wiper on the high surface of the car is not clean, you must replace one in time. If there is a problem with the wiper itself, it may be that the rubber products are chosen when choosing, and after a long time, there will be hardening and aging. Don't park your car on the street when driving, the wipers will age quickly after being exposed to the wind and sun, and they will be very unclean.

If the wiper does not work in the rain angel, it is easy to cause obstacles to your vision, so after finding this situation, you must replace one in time. Don't park your car under a tree in the summer, as bugs will spill some slime, and if the grease is often found on the windshield, the wipers will stick it all together in the process of use, as if it were coated with a layer of wax. The best way to protect your wipers is to cover them with a protective film when you park them so that they don't get damaged.

The wipers need to be maintained, and they must be replaced with a new wiper every once in a while, otherwise the group will be prone to traffic failures when it rains. When maintaining the wipers, you can choose to wipe some dust on the wipers with a rag, and apply some raw materials in time to make the wipers have no scratches, so that the glass of the car will also be very good-looking. There is generally a rubber strip inside the wiper, which is used to scrape rainwater, so at this time, the wiper should be cared for in time.

When using the car, you should also pay attention to it, if the sun is relatively strong, do not expose the car to the sun, it will sunburn some of the wipers. Wipers have a maintenance period, so in the process of sending the car for repair, it is also necessary to test it. If there is a loud friction sound on the wipers, it means that the wipers have degenerated, and if you want to use them, you should also send them for timely repair.

If there are stones on the glass of the car, it will be easy to scratch, so it is necessary to check and maintain it regularly. <>

It may be because there is a problem with the wipers, because the wipers are made of rubber, so it is likely to cause damage to the void, it may be caused by the aging of the rubber strip, it may be caused by the wrong angle of the wipers, and it may be because there is an oil film on the front windshield of the car.

It may be that there is a lack of glass water, or it may be that there is a problem with the wiper, the time is too long, the wiper is out of shape and bends, and the friction with the glass can not be tightened, you can replace a new wiper.

It may be that the wipers are worn, or because they are too old and aged, so they will become hard and cause the wipers to be unclean.

Wipers may only be used when it rains or when cleaning the window glass, and they are not very useful in normal times, and sometimes it doesn't rain often, and we forget to check whether the wipers can be used normally. The wiper should be checked regularly to see if the glue of the wiper is aging, sometimes the wiper will not be clean after a long time, how should we solve this problem?

If the window glass is not clean, it is easy to block the view, and it is easy to have safety problems when driving. If there is still blurry after we use glass water to clean the glass, then we need to see if there is an oil film on the glass, because glass water is also difficult to remove the oil film on the car window, but the treatment method is also very simple, only need to use an oil film remover or use toothpaste can easily solve it. However, you should also pay attention to cleaning the oil film on the wipers, otherwise it is easy to get on the glass when using the wipers.

If the wiper is leaking when the rain is scraped, or there is a place that has not been clean, then it is necessary to consider whether the wiper of the car is damaged, so that we need to replace the new wiper, the wiper is generally replaced once a year or so, and some cars can also be replaced once every six months, the wiper is broken, in fact, you can replace it yourself, you can buy a wiper suitable for your own model, and then go to the Internet to search for the relevant **, and learn to replace it by yourself.

When buying wipers, we have to choose the right model for ourselves, not to save trouble, buy at will, so that if it is not suitable to buy back, it is also a waste of time and money. When replacing the wipers, be careful not to damage the window glass and pay attention to safety.

Although we don't often use wipers, we also have to regularly check whether the wipers can work properly to prevent some accidents, and the window glass of the car should also be cleaned regularly to keep it clean, so as not to affect the sight of the driver, in order to better ensure our driving safety.

There is an impact, it may affect the driver's line of sight, it may cause the driver Zheng Chen to make a mistake in judgment, there is an early bend that may affect the glass, and it may cause slip marks on the glass Lu Cong.

If the wipers are not clean, it will have an impact, because if you drive a car, you will not be able to see the road clearly, and your mood will be very bad, and there is a high risk of danger.

Poor wipers can have an impact and may affect your vision while driving.

There are many reasons why the wiper of the car is not clean, and the following is a brief introduction to a few common causes and solutions.

The first reason is that the rubber strip on the wiper of the car is damaged, and there are some cracks and defects, so it can't be cleaned. Many people may have used wipers to clean up rain and impurities on the front windshield of their cars, but they have not looked carefully at the specific situation of wipers. The reason why the wiper can talk about the impurities and rain scraping off the front windshield of the car is mainly the friction between the rubber strip on the wiper and the windshield.

Because the material is rubber, there will be some aging, which may not fit closely with the front windshield of the car, or it may be due to deformation and fracture that causes it to be unclean.

The second reason is that there is some debris between the wiper and the windshield, which will also cause the wiper to not be clean. When we park outdoors under a tree, some branches and fallen leaves fall on the windshield of the car. If we don't clean up those branches and fallen leaves, it is likely that when we use the wiper to clean the windshield, those branches and fallen leaves will be added to the middle of the wiper and the windshield, and the rubber strip of the wiper and the windshield will naturally not fit tightly, and it will not be clean.

The solution is simple, just remove the branches, leaves or other debris that have been placed between the wipers and the windshield.

The third reason is that there are some gums and slime on the windshield, which causes the wiper to be blind and the bypasser is not clean. If we park under some large trees that are prone to dripping gum and slime, there will be some gum and slime dripping on the windshield, and because these substances are very sticky, it is difficult for the wiper to scrape them clean. As for how to clean it, you can only buy some adhesive remover, or use some plastic shovels to clean one side first, and then rinse it with hot water.

Hello! Glad for your question.

1. Wiper blade aging: two wiper blades are rubber products, which will be aged and hardened after a period of time, and it is more significant in winter. Most wiper blades are recommended to be replaced every one to two years.

2. There is a foreign object in the middle of the wiper blade: when the wiper is bent, there will be a sharp sound of friction between the wiper blade and the front windshield, and the car owner can detect and remove the foreign object on the wiper blade or the bottom of the two scrapers to ensure that the position of the two wiper blades is clean.

3. The installation angle of the two wiper arms is wrong: it will affect the wiper blades to jump on the windshield, then it will cause a sound. If the two wiper blades are normal, you need to adjust the angle of the wiper arm, and the two wiper blades should be buried directly at the windshield level.

This may be caused by a problem with the round rise of the wiper wheel, or it may be caused by loose screws, which can be reinstalled, or there may be a problem with the glass, or there may be a problem with the hair accompanying the cavity of the old wiper.

It is because there is a foreign object between the wiper blade and the glass, and it may be that the rubber on the wiper blade has been damaged by aging, so it cannot be cleaned.

There is a problem with the wipers, there is something between the wipers and the glass, and there are some things on the glass that are difficult to scrape, and you can choose to replace the wipers if they can't scrape clean.

It should be that the rubber strip on the wiper is damaged, or it may be that there is a crack, and you can replace the rubber strip in time when you encounter this situation.

Reasons why the wipers are not clean:1. Scraper angle dust key waiter:

The problem with the scraper angle is that the scraper is not clean. Just adjust it. If the wiper pressure is too high, the force will be a little biased, so the distance between the springs needs to be relaxed.

2.Foreign body of the scraper: The scraper will make a "click" sound when it is working, which may be a foreign object mixed between the scraper and the windshield, or it may be that the scraper is not clean.

At this time, it is necessary to check whether there are any foreign objects, and if there is, be sure to clean it. Of course, the wipers are very rough, just wipe them with pie sandpaper. 3.

Wiper hardening: After all, everything has its own life key, especially the car parked on the street, which must not be exposed to the sun or rain. After a long time, the aging of the wiper rubber will accelerate, so the wiper effect is naturally not obvious.

At this point, it is essential to replace the wiper with a new one as soon as possible.

It may be because your wiper has been used for too long and is worn out too much, so it is not clean, and it is recommended that you replace it with a new one.

90% of the reason is that your wiper blade has been used for too long, it is aging, and you need to replace it with a new one.

There are three main reasons why wipers aren't clean:

The oil film attached to the glass is mainly formed by the exhaust gas emitted by other cars, as well as the oil smoke attached to the glass surface; In addition, after the wiper blade is used for a period of time, some dust and dirt will be attached to the surface, so you can use a cloth to scrub back and forth, or use sandpaper to renovate the wiper; If the strip is aged and cracked so badly that it cannot be cleaned, it is necessary to replace the wiper blade with a new one.

Reasons why the wiper is not clean: 1. Scraper angle: The problem with the scraper angle is that the scraper is not clean, and you can adjust it.

If the pressure of the wiper is too high, the force will deviate somewhat, so you need to relax the distance between the springs. 2. Foreign objects on the scraper: When the scraper is working, it will make a "click" abnormal sound, which may be because of the foreign matter mixed between the scraper and the windshield, which may also be that the scraper is not clean.

At this time, it is necessary to check whether there is really a foreign object, and if so, it must be cleaned. Of course, the wipers are rough, just wipe them with sandpaper. 3. Hardening of the wipers:

After all, everything has a lifespan since spring, especially a car parked on the street, which must not be protected from sun and rain. For a long time, the aging of wiper rubber will be accelerated, so the wiper effect is naturally not very obvious. Rotten wipers must be replaced as soon as possible.

If you find that the wiper of the new car is not clean, most of it is caused by improper maintenance of the rubber strip of the scraper, but in fact, the rubber strip is not aged. You have to find a way to polish the rough rubber strips.

If the wiper blade does not scrape the glass clean, or makes a "crunch" sound, check the rubber wiper blade. Lift the wiper blade rocker arm from the windshield until it locks when it is perpendicular to the windshield. Be careful not to allow the wiper blade to pop back during this process, as this will damage the windshield.

If the wiper blade is not locked in place, lift it by hand, secure it, and then check the rubber wiper blade.

Soak a clean rag in undiluted glass detergent and wipe the clean end of the wiper blade with a membrane cloth. Use your fingers along the edge of the wiper blade to check if the rubber sheet is frayed. If there are any cracks or openings in the top, replace them with new wiper blades.

When replacing a new wiper blade, first turn the blade to a suitable angle to the wiper blade rocker.

Some wipers are equipped with safety clips, and the safety clips should be loosened before removing the wiper blades. Before removing the wiper blade, remember that side is where the wiper is wrapped and installed, so that it will be very convenient when installing a new wiper blade. You can also take a picture before removing the old scraper**, which is more convenient.

Depending on the model of the new wiper blade, choose different adjustment clips to install the wiper blade. For details, please check the instruction manual of the new wiper blade. Usually, it is also possible to use the adjustment buckle of the old scraper.

Photo by Dong Peng of Pacific Automobile Network).