The angle valve of the water pipe on the sink is leaking, what should I do?

If the angle valve of the water pipe on the sink leaks, this situation is requiredConsidering that the angle valve skin gasket may be broken, there is a quality problem with the angle valve, aged for a long time,There may be a problem with the water pipes. The treatment method is to change the leather pad on the angle valve, replace the angle valve, and replace the water pipe.

The quality problems of the water pipe angle valve are <> replaced with a new angle valve

This problem was encountered in my family at the time, and I was so scared that I didn't think that the water pipe angle valve would suddenly leak. Later, I asked a neighbor to help repair it, and the neighbor told me that the angle valve was broken, so I quickly turned off the main valve of the water pipe and went to buy a new angle valve to replace it. When decorating, you should buy a first-class angle valve, a first-class water pipe angle valve, which will take a longer time, if you buy a bad quality angle valve, it is likely that there will be a leakage problem.

When encountering a leak of the angle valve, it is necessary to consider that the angle valve may be aging due to quality problems, and it should be replaced with a new one if it is broken.

The leather pad on the angle valve of the water pipe is broken, and it <> replace it with a new leather pad

There are two water pipes above the sink, and a corner valve is usually installed on the top of the water pipe, which is done to facilitate maintenance and stop the water in time. If the angle valve is leaking, it will be considered that there is a leather pad on the angle valve, and this leather pad may be broken, because the broken leather pad will cause the angle valve to leak, so consider replacing it with a new leather pad. In the past, when these things broke down at home, my father operated them all by himself, and he cut a piece of leather from a scrap tire to make a new leather pad.

My father put the new leather pad on the angle valve, and the angle valve did not leak. We can go to the building materials market to buy a special leather cushion, and directly replace the leather cushion to use it normally.

It may be that the water pipe is broken, and it <> to replace it with a new one

The angle valve is connected to the water pipe, if the angle valve leaks, it is possible that the water pipe is broken, and the water will be exposed from the angle valve. If this is the case, it is recommended to replace it with a new water pipe, because the water pipe and angle valve will be aged, and it can be used normally with a new water pipe.

ConclusionIn daily life, we have to master some common sense, the water pipe angle valve is leaking, and we must quickly turn off the main switch of the water pipe at home. Only by turning off the main switch of the water pipe can the leakage be stopped, and the master can be quickly found to repair it.

When changing a valve, the main gate of the water should be turned off so that the water does not flow to the ground, which is safer.

You should immediately let the decorator come to deal with it, because only in this way can such problems be solved faster.

You should call in the appropriate professional to carry out repairs, and this is also because there is a problem with the water pipe, so in this case it is necessary to replace the water pipe with a new one, so as to ensure normal use.

It should be replaced with a new angle valve, and it doesn't cost much to replace it with a new one.

You can buy a roll of raw meal with the angle valve for winding, if the leakage is more serious, then you should find a professional maintenance worker to repair.

Kitchen angle valve leakage can replace the angle valve in time, some angle valves are of poor quality, you must buy the angle valve produced by regular manufacturers, so that the use time is long.

At this time, you should ask the corresponding professionals to carry out this treatment, after all, there is a water leakage, then you should check in time to check which water pipe is rotten.

The best thing to do is to find some sealant and apply it to the leaky area, so that it won't leak when it's dry.

1. When the angle valve leakage is found, the cause of the leakage should be found first, and then the appropriate method should be taken to deal with it. We can first observe in detail whether the inner wire joint inside the angle valve is damaged or cracked, if there is cracking, the inner wire joint should be replaced with a new one, or a rubber pad should be installed, so that the water leakage problem can be solved.

2. If there is no problem with the inner wire joint, the angle valve should be replaced with a new one, and it is recommended that you must choose to buy the angle valve of the same specification and model for replacement, so as to avoid the phenomenon of unsuccessful replacement. There are many angle valve materials on the market, and it is recommended that you choose to buy copper angle valves, which will have better quality and service life.

3. Before installing the angle valve, the foreign objects in the connection position must be removed first, and the connection position should be kept clean. In the process of installing the angle valve, we must pay attention to the surrounding direction of the angle valve, and do not get it reversed, so as to avoid the phenomenon that it cannot be tightened.

4. If the user does not know how to install the angle valve, then it is best to ask a professional to help install it. Before installing the angle valve, you also need to turn off the tap water main valve at home, after the angle valve is installed, open the tap water main valve at home, and then check in detail whether there will be leakage in the position of the angle valve, if there is a leakage, you need to re-install.

Change to a triangle valve. The problem is not much that this triangle valve is faulty.

First check if there is a problem with the triangle valve that connects the faucet hot water pipe. The method is to close the triangle valve first, then remove the hot water pipe, and then open the triangle valve to see if the water pressure is large, be careful not to burn.

The pipe is shaped at a 90-degree angle at the angle valve, so it is called a triangle valve. Quick opening 90 degrees to quickly open and close the valve. Slow opening 360 degrees non-stop rotation of the angle valve handle to open and close the valve. Nowadays, it is basically used to use fast open. Extended Materials.

The key spool of the triangular valve.

According to the spool, the triangle valve can be divided into: spherical spool, ceramic spool, ABS (engineering plastic) spool, alloy spool, and rubber rotary spool. The advantage of the ceramic spool is that the switch feels smooth and lightweight. It is suitable for families, with a long service life and a relatively high cost.

Cleaning and maintenance of angle valves: Wash off simple stains on angle valves with clean water. For stains that are easy to remove, you can wash them off with clean water. The surface of the faucet needs to be cleaned frequently and dried with a soft cloth after washing.

Toilet and faucet at home need to use angle valves, once used for a long time, the angle valve will age, and the phenomenon of water leakage will need to be treated, but for the decoration of Xiaobai does not understand, so what to do with the leakage of the angle valve?

1. First of all, we need to check whether there is cracking in the inner wire joint, and if there is cracking, the joint needs to be replaced. If there is no problem with the joint, you can directly replace a new angle valve, the angle valve is not expensive, it is recommended to buy a copper angle valve.

2. If there is water leakage at the wrench, then replace it with a new spool and it can be used normally.

3. If there is water leakage at the threaded joint, you can add a few laps of raw material belt to the thread, which can generally solve the water leakage problem.

4. If there is water leakage at the handle of the switch, it means that there is a problem with the sealing of the angle valve, you can try to change a new angle valve, so that it can be used normally.

Regarding the leakage of the angle valve, you need to check the leakage problem first, and then prescribe the right medicine, some cases can be repaired, and some cases need to replace the angle valve, so we operate according to the actual situation, I hope the above content can give you a reference.

1. In this case, you need to prepare relevant appliances first, so that when you take out the broken angle valve, you will not be in a hurry, generally speaking, the tools you need to use are: water tape, adjustable wrench, flat-edged screwdriver, hammer, buy a replacement angle valve or faucet, fine-toothed hacksaw blade.

2. After the tools are ready, close the main switch of the water valve, and then let the water flow in the water pipe at the broken place dry.

3. After the main water valve is closed, then you can use a small saw to cut off the broken end of the outer wire in the inside, and at the same time should be operated according to the wall thickness of the broken pipe, in case the inner wire of the outer layer is sawed directly, when you are about to saw the outer layer of the "inner wire direct", take out the saw blade, and it will be about 10 minutes to saw.

4. When we open an opening of the pipeline, then we can use a screwdriver and a hammer to chisel out the broken part, the specific operation is to align the screwdriver edge with the broken end just by the saw blade sawed out of the side pipe wall of the pie, and then use the hammer to hit the top of the wooden handle of the screwdriver, so that the broken end can be easily removed.