The water filtered out of the water dispenser is very dirty, how should it be cleaned?

1.If the water filtered out of the water dispenser is dirty, then we can choose to use white vinegar to clean it up. Because everyone has white vinegar at home, we can usually pour some white vinegar into the water dispenser if we feel that the water in the water dispenser is too dirty.

Then plug in the water dispenser. Heat the water and white vinegar in the water dispenser. Wait until the water and white vinegar are boiling, then turn off the power.

Allow the water in the water dispenser to cool naturally. After cooling, you will find that the water in the water dispenser is cleaner and does not smell any more. In fact, the main reason why the water filtered out of the water dispenser will become dirty is because there is a lot of limescale in the water dispenser.

These scales are made of calcium carbonate.

Compose. Therefore, after calcium carbonate and white vinegar are fused together, a chemical reaction will occur.

Then you can clean the limescale.

2.You can also use beer to clean up limescale from the water dispenser. If there is limescale in the water dispenser in your home, you can pour some beer into the water dispenser.

Try to choose to pour more. Then, after a few hours, the limescale in the water dispenser will come off on its own. Just clean the inside of the water dispenser.

But try to wash it as many times as you can. Because if it is not cleaned, it will cause a smell of alcohol in the water dispenser.

3.In fact, you can also use yam to clean up limescale. First of all, we need to heat up the water in the water dispenser.

When the water is completely boiling, we add some yams. Then continue to bring the yam to a boil. Then just turn off the water dispenser and let the yams cool for an hour.

After an hour, we can just pour out the yams, and then clean the water dispenser, so that the scale can be cleaned off.

In fact, whether it is a water dispenser or a hot water kettle, if it is used for a long time, there will be scale inside, so we should usually clean it more, otherwise there will be a bad smell.

You only need to buy a descaler, and then directly use the descaler to clean the filtered water, and of course, you can also take a sandpaper to clean it.

Pour out the water and throw it in the trash, the water is not drinkable at all, and it cannot be used to wash things.

The water dispenser allows us to drink clean hot or cold water anytime and anywhere, but this does not mean that the inside of the water dispenser does not need to be cleaned. If the water from the water dispenser has impurities, or even black dirt, then it is necessary to clean the water dispenser inside and out, otherwise it will not be clean and hygienic to drink.

The dirty water coming out of the water dispenser means that it needs to be cleaned.

Cleaning method: 1Pour liters of water and 1 tablespoon of sterilized effervescent tablets into a bucket and stir evenly with a plastic glove. Vinegar can also be used, but the effect is not as thorough as disinfectant powder.

2.Turn off the water dispenser, remove the bucket, and pour the prepared disinfectant into the water storage tank. After 5 minutes, wipe the inner wall with a soaked sponge to drain the water from the container.

3.Fill the water dispenser's tank with clean water and drain it with a cold water switch. Repeat this 4 times until there is no smell of disinfectant powder or vinegar.

4.Remove the drain pan, wash it and drain it. Wash your hands, wipe your mouth with a dry towel and fill your mouth with new bottled water. Use two water intakes, each with a glass of water, and make sure there is no smell in the water!

Impurities in the water coming out of the water dispenser may be formed due to the reaction of substances in the tap water. Tap water contains chemical elements such as Ca(HCO3)2 and Mg(HCO3)2. Chemicals react and form during heating.

CaCO3 and MGCo3 will eventually turn into colorless dirt.

If the water impurities in the water dispenser are black, it is caused by the fact that the water dispenser has not been cleaned for a long time and there are many bacteria. When the water dispenser receives water, a large amount of air enters. These bubbles contain dust particles and bacteria.

Viruses, if the water dispenser is not cleaned for a long time, the bacteria will multiply in large numbers and eventually form a black dirt. In addition, the water dispenser itself also has some dead spots, which can easily accumulate microorganisms.

Unplug the water dispenser, cut off the power, first clean the outside of the water dispenser, then carefully wipe down the entire body, including the sink valve and locker, using a clean cloth moistened with detergent water, and remove the bucket. And open the sewage outlet behind the water dispenser to discharge the remaining water, because the remaining water in the sewage pipe is the culprit that causes the secondary pollution of the water dispenser.

Remove the smart seat of the water dispenser, clamp the alcohol swab with tweezers, and carefully scrub the internal tank of the water dispenser. Since the inner tank of the water dispenser is in direct contact with the air, it is easy for bacteria to accumulate. Wiping with alcohol removes dirt from the top and prepares you for the next step of disinfection.

Pour an available chlorine disinfectant at a concentration of 250 mg l into the water dispenser and fill the entire internal tank for 20 to 30 minutes.

Turn on the hot and cold water tap until the disinfectant is exhausted, then rinse with plenty of boiling or purified water until the residual disinfectant is removed before drinking.

1. How often should the filter element of the water dispenser be replaced?

1. PP cotton filter element.

The main function is to filter the impurities in the source water, at the first level of the water purifier, the impurities in the water are intercepted here, piled up on the surface of the pp surface, with the passage of time, the impurities accumulate more and more, and the final blocked filter hole is also easy to cause secondary pollution, so it must be replaced, generally once every 3-6 months.

2. Activated carbon filter element.

The main function is to filter the pigment and residual chlorine in the water, which has little effect on the blocking of the filter element, and is not easy to cause secondary pollution, so the service life should be slightly longer, generally changed once in 6-12 months.

3. RO reverse osmosis membrane filter element.

This filter element technology has been used in the aviation industry for a long time, the filtration accuracy is very high, all heavy metals, viruses, agricultural residues and other harmful substances will be intercepted here, because it has been filtered by the first two filter elements, so here, the quality of the water source is already relatively good, plus the good RO reverse osmosis membrane itself has a relatively good technology and quality level, so the general RO reverse osmosis membrane filter can be used for 2-3 years.

2. How to replace the filter element of the water dispenser.

1. Close the ball valve for water plating and wait for about 10 minutes. (Decompress the system).

2. Unscrew the nut joint on the right side of the membrane shell with your hand or tool and pull out the water pipe.

3. Facing the machine, hold the membrane shell tightly with your left hand, and turn the tail end cover with your right hand.

4. Close the ball valve of the pressure barrel, unscrew the nut joint above it by hand or tool, and lead the water pipe into an empty bucket or washing tank.

5. Hold the reverse osmosis membrane tube tightly with your left hand, then clamp the old reverse osmosis membrane with pliers, and move the direct drinking water machine to pull it out of the membrane shell.

6. Open the envelope of the new reverse osmosis membrane and take it out.

7. Screw the membrane shell cover tightly in the same posture as you turn the membrane shell cover.

7. If necessary, adjust the joint in a clockwise (locking) direction so that it points to the rear of the machine.

9. Let the water purifier run for more than two hours, so that the system enters the normal water-making state, and then connect the water pipe with the pressure bucket ball valve and open the pressure bucket ball valve. This is the end of the whole dressing process.

With the improvement of people's quality of life, we basically use water dispensers to drink water at home, which can intelligently filter tap water, and can be drunk quickly and with peace of mind. The main reason why it works so efficiently is because of its built-in filter, which can quickly filter out impurities in the tap water, providing us with pure water in time. However, if the filter is not cleaned regularly, it is also easy to breed bacteria and affect the health of the water we drink.

So how should we clean the water dispenser filter? Next, let's introduce the specific method.

Step 1: When cleaning the water dispenser, we can directly soak the filter in warm water, wait for a few minutes and then unscrew it with a dry towel, separate the upper and lower sections of the filter element and rinse it under the faucet, when the upper filter element is filled with about half a pot of tap water, shake the filter element up and down several times, pour out the remaining water, and repeat it several times to make the micropores of the filter element unblocked.

Step 2: Pat the mouth of the filter element up and down with the palm of your hand to shake the lower filter element, and make the tap water clean filter material repeatedly several times until the tap water flowing out of the lower filter element is clear.

Step 3: Then we clean the water dispenser and the heating and cooling chamber, then put in clean water, and then repeat the rinse a few times without any problem. If you can't do it yourself, you can ask professional staff to help clean it regularly, which is more thorough and more assured.

The above is the specific solution of how to clean the water dispenser filter, I believe that everyone can quickly learn how to clean it through the introduction of the above content.

To clean the water dispenser's filter, you can follow these steps:

1.First disconnect the power supply to the water dispenser, and then remove the filter.

2.Soak the strainer in clean water, taking care not to use hot or boiling water, which may damage the strainer.

3.Slowly scrub the surface of the filter with a soft brush or sponge, taking care not to use hard or sharp objects that may scratch the filter.

4.After cleaning, rinse the filter with clean water to make sure there is no residue on the filter.

5.Allow the strainer to dry and reinstall it in the water dispenser.

6.Plug in the power, start the water dispenser, and let the water flow through the filter to make sure the filter has been installed correctly.

Please note that the frequency of cleaning the filter should be based on usage, and it is generally recommended to clean it every 3 months. In addition, it is recommended to check the instruction manual of the water dispenser before cleaning the filter to learn more about the specific methods and precautions for cleaning the filter.

The filter screen of the water dispenser is an important part of ensuring the quality of drinking water, so it is important to clean the filter regularly. Here are the steps to clean the water dispenser filter:

1.First, power off the water dispenser and unplug it to ensure safety.

2.Open the front or side panel of the water dispenser and locate the filter location.

3.Remove the strainer and rinse it with clean water to remove dirt and impurities from the surface.

4.Gently scrub the filter with a soft-bristled brush or toothbrush, taking care not to use hard objects or too strong force to avoid damaging the filter.

5.If there are stubborn stains on the filter that cannot be removed, you can use a professional cleaner to clean them. But be sure to follow the instructions and pay attention to safety.

6.After washing, place the filter in a ventilated and dry place to dry.

7.Reinstall the dried strainer back into the water dispenser and close the front or side panels.

8.Plug in the power and turn on the water dispenser, waiting a few minutes for the fresh water to run through the filter to rinse off the residue.

In short, regular cleaning of the water dispenser filter can ensure the quality and taste of drinking water, and at the same time, it can also prolong the service life of the water dispenser. It is recommended to clean every 3 months or so.

The filter screen of the water dispenser is an important device for filtering impurities in drinking water, which needs to be cleaned and replaced regularly. Here are the steps to clean the filter:

1.Remove the filter: Open the front or side cover of the water dispenser, find the filter element, and remove it according to the instructions on the manual.

2.Clean the filter: After removing the filter, rinse the filter element with running tap water, and you can alternately pinch and twist the filter screen by hand under the tap water to let the impurities in it flush out as much as possible. However, do not scrub or scrub with a brush or other hard objects to avoid damaging the filter.

3.Soak and disinfect: soak the removed filter in water for 10-20 minutes, and add an appropriate amount of white vinegar or bleaching powder to disinfect and sterilize. Try to avoid boiling water during washing, and do not heat to dry.

4.Wait to dry: After removing the strainer, rinse the foam on the surface of the strainer with clean water, and then let it air dry naturally, without any detergents.

5.Install the filter: Install the cleaned filter back into the water dispenser, taking care to follow the instructions.

The above are the steps to clean the filter screen of the water dispenser, in order to ensure that the family members drink safe and hygienic drinking water, it is recommended to clean the filter regularly. Water dispensers have a shorter filter life and are usually replaced after a period of use.

The filter screen of the water dispenser plays a very important role in the performance and water quality assurance of the water dispenser, so it is very important to keep the filter clean.

The following are the specific steps and plans for cleaning the water dispenser filter:

1.Power off: First of all, you need to turn off the power of the water dispenser, and the power off is safe.

2.Take out the filter element: Open the filter compartment door of the water dispenser and take out the filter element.

3.Clean the filter: Put the filter in a container, add an appropriate amount of water or drinking water, and add an appropriate amount of baking soda, which can play a role in sterilization, decontamination, odor removal and bleaching. Then gently scrub with a brush or hand to thoroughly remove the dirt.

4.Rinse: Rinse thoroughly with running water after washing until no foam.

5.Disinfection: The filter can be turned into a glass filled with alcohol for disinfection, and the time should not be too long.

6.Replace the filter element: Put the cleaned filter back into the bin and replace it according to the filter life of different water dispensers.

It should be noted that the water quality and use environment of each household are different, and it is recommended to clean and replace the filter cartridge regularly according to the actual situation. Generally speaking, the regular cleaning time can be controlled between one month and two months.

Here are some tips and do's and don'ts:

1.Edible baking soda powder can be cleaned, sterilized and odorized, if not, it can be replaced by ordinary alkali powder.

2.In the process of cleaning the filter, it is necessary to pay attention to the strength, too much force will cause the filter to deform or break, affecting the filtration effect.

3.If you find that the filter is not easy to clean or has been impermeable, it is recommended to replace the filter element in time to ensure the quality of drinking water.

In short, timely cleaning and maintenance of the water dispenser filter can ensure the normal use of the water dispenser and the safety of water quality.