What are the specific cleaning methods and steps of professional water dispensers?

In order to ensure the health of drinking water, it is necessary to clean the water dispenser regularly. At present, the methods of cleaning water dispensers on the market are mainly divided into tablet cleaning, disinfectant cleaning, ozone cleaning and pressure filtration cleaning.

The most common method used to clean the inner liner of the water dispenser is to use decontamination effervescent tablets or special disinfectants. It is understood that decontamination effervescent tablets, which contain chlorine, can effectively kill Escherichia coli, Staphylococcus aureus, Candida albicans and other germs after water decomposition. The specific cleaning process is:

First open the sewage pipe behind the water dispenser, and turn on all the switches to drain all the remaining water, dissolve 1 decontamination effervescent tablet in about 2 liters of water to make disinfectant, you can use a small part of the disinfectant to scrub all parts of the water dispenser, and the rest is poured into the bile, after 15 to 20 minutes, then open the switch and sewage pipe of the water dispenser, drain the disinfectant, and rinse the inner tank with 7 8 liters of water many times.

Disinfectant cleaning is to complete the disinfection process after blending according to the product instructions, referring to the steps of tablet cleaning.

Ozone sterilization methodSome brands of purified water and distilled water outlets are equipped with ozone disinfection machines to provide door-to-door cleaning services. According to reports, this disinfection method uses the sterilization effect of ozone to achieve the purpose of cleaning the water dispenser, during cleaning, after emptying the remaining water in the machine, the interface of the disinfection machine and the water inlet of the water dispenser are docked, and the ozone is injected into the inner tank of the water dispenser, and after about 20 minutes of fumigation, a small amount of water is released after the bucket is installed. Since the half-life of ozone at room temperature is 20 50 minutes, it can be completely decomposed within a few hours, oxidized into harmless oxygen, water and carbon dioxide, and after ozone sterilization and cleaning, you can drink safe water in one or two hours.

However, it should be noted that this cleaning method cannot remove impurities such as scale.

Pressurized filtrationAt present, there is another professional water dispenser cleaning machinery that adopts pressurized filtration method on the market. When cleaning, one end of the cleaning machine is connected to the water inlet of the water dispenser, and the other end is connected to the drainage outlet of the lower part of the water dispenser to form a closed-loop cycle, and a special disinfection cleaning agent is used at the same time. This method uses the circulating pressure of the cleaning machinery itself, which can fully achieve the purpose of cleaning, and then the scale and impurities can be completely discharged through the mechanical pressure.

How do I clean a water dispenser? According to the test of the relevant environmental health monitoring department, the cold and hot water bile in the bottled water dispenser will multiply bacteria, viruses, sediment residues, heavy metals and even bloodworms if it is not washed for three months, which seriously endangers people's health. The water dispenser is usually the barrel neck of the bottled water upside down and placed on the "smart seat" of the water dispenser, and then the hose in the machine will introduce the water into two water galls, one of which is a hot water tank and the other is a cold water tank, in addition to the function of cold and hot water, these two water galls can also play a role in precipitating impurities in the water.

People usually change the bottled water repeatedly, but ignore that there is still a certain amount of water in the inner tank of the water dispenser, which will hide disease-causing bacteria, and over time, it will naturally become a breeding ground for bacteria. Consumers often have such misunderstandings that the water dispenser itself is a water purification device, and the bottled mineral water is clean, even if the water dispenser is not cleaned and disinfected regularly, there will be no problem, so there will be all kinds of foreign substances in the water. Therefore, the water dispenser must be thoroughly cleaned and disinfected regularly, and the commonly used method is to clean it with disinfectant solution, and then flush the water dispenser with clean bottled water until the residue of the disinfectant solution is washed away.

Steps to clean the water dispenser: 1cut off the power of the water dispenser; 2.

Insert the 5-gallon water bottle vertically down into the smart seat on the upper part of the machine, turn on the red hot water faucet and the blue cold water faucet until the water is released, then turn off the faucet, and then hold the bottle with both hands and take out the water bottle upwards; 3.Cleaning the outside of the water dispenser and the smart seat; 4.Pour 600ml of special cleaning and disinfectant solution into the water storage tank; After a few minutes, turn on the red and green faucets until the disinfectant is exhausted; 6.

Unscrew the water drain valve at the back or bottom of the machine to drain the disinfectant in the water dispenser; 7.Rinse several times with boiling or purified water; 8.Tighten the drain valve, and the disinfection and sterilization operation procedures are completed.

It is best to ask a professional to clean the water dispenser! You don't have tools to clean thoroughly, Xi'an handkerchief environmental protection technology **** is professional, you can go to consult!

How do I clean a water dispenser? Detailed cleaning method

Water is the source of life, every day we need a certain amount of drinking water to ensure the health of the body, now most families are using water dispensers, in order to avoid water dispensers caused by secondary pollution of water quality, affecting human health, water dispensers need to be cleaned regularly. So how should you let the waiter clean the water dispenser? Below we will introduce you in detail how to clean the water dispenser, and hope to help you.

Cleaning method of household water dispenser:

Cleaning method of water dispenser (white vinegar method):

For household users, if there is no disinfection liquid at home, you can choose to clean the water dispenser with white vinegar. Here's how:

1. Unplug the power plug, remove the bucket, open the sewage pipe behind the water dispenser, and drain the remaining water, because the remaining water in the sewage pipe is the key to the secondary pollution of the water dispenser.

2. Turn on all drinking water switches and drain water. This requires unscrewing the two symmetrical screws at the back of the water dispenser to remove the bottom and drain the water cleanly. When draining, special care should be taken not to flush the inner pad in the water dispenser.

3. After pouring out the water, tighten the screws. Add white vinegar and a small amount of water to the water dispenser and heat for 10 minutes.

4. After heating, the vinegar is discharged from the water discharge port, and the water dispenser is rinsed twice, which is mainly to remove the vinegar smell.

Cleaning method of water dispenser (using disinfectant):

When choosing a water dispenser disinfectant, it is best to choose a food-grade disinfectant. The active ingredients of common water dispenser disinfectants are represented by chlorine dioxide and hydrogen peroxide. Among them, chlorine dioxide has a low cost, but the residue is not easy to clean; The residue of hydrogen peroxide is easy to clean, but **high.

When using chlorine dioxide for disinfection, soak in a solution with a concentration of 50 100mg l for 5 minutes to achieve the purpose of disinfection; When disinfecting with hydrogen peroxide, the soaking time is the same as 5 minutes, but the concentration is. Disinfection in this way is one of the most thorough methods. Soak the pipes of the water dispenser with disinfectant solution.

Steps to clean the water dispenser:

1. Turn off the power of the water dispenser.

2. Place the bottled water on the smart seat on the top of the water dispenser. Turn on the hot and cold faucets until the water is drained, then turn them off and remove the buckets.

3. Then use a clean rag to clean the shell and smart seat of the water dispenser.

4. Pour the configured 600ml water dispenser cleaning and disinfectant into the water storage tank on the top of the water dispenser for heating for 10 minutes;

5. After heating, turn on the faucet of the hot and cold water dispenser to remove the disinfectant.

6. Finally, open the drain valve on the back of the water dispenser to drain the residual disinfectant.

7. Finally, choose to rinse the water dispenser with boiling water to clean and eliminate the residual disinfectant.

How long does it take for a water dispenser to be cleaned? The hygiene of the water dispenser is closely related to our health, and for our health, it is necessary to clean the water dispenser regularly.

That's itHow do I clean a water dispenser? Detailed cleaning methodAll of it.

Water dispensers are generally essential electrical appliances at home, and the cleanliness of water dispensers is related to human health, so how to clean water dispensers?

First, disconnect the water dispenser, remove the bucket on it, and clean up the remaining water in the water dispenser.

Then open the plastic lid of the bucket and pour white vinegar or water mixed with citric acid into it.

Finally, plug in the water dispenser, heat for 40 minutes to about an hour, open the faucet or drain, drain the white vinegar or citric acid, and then pour in the water in the same way and heat it repeatedly, preferably three to four times.

Do not use detergent to clean the water dispenser, if it is not clean, the detergent is likely to remain in the water dispenser and endanger human health.