How to increase the conveying distance of the pipe chain powder conveyor

Among the various conveying equipment currently sold on the market, the pipe chain powder conveyor with an ultra-long horizontal conveying distance of 60 meters has undoubtedly become an advanced equipment with the farthest conveying distance. The pipe chain powder conveyor can maintain a leading conveying advantage in the field of conveying equipment, because the pipe chain powder conveyor adopts the most advanced ring pipe sealing conveying structure in the world in terms of structure, and the chain is driven to rotate by the sprocket machine during transportation, and then the material is driven by the disc attached to the chain to complete the entire conveying process.

According to the structure and operating principle of the pipe chain powder conveyor, the equipment can set the fuselage within 60 meters under the premise of maintaining stable and efficient conveying performance to meet the relevant needs of enterprises for conveying distance. With the improvement of industrial production level and industrial production structure, the requirements for the conveying distance of conveying equipment have also increased, but the pipe chain powder conveyor can still meet the distance requirements of enterprises for conveying equipment. This is because the pipe chain powder conveyor can also be freely set up with multiple inlet and outlet ports, and the maximum limit of the conveying distance of a single machine is 60m, and the conveying distance can be doubled by the free and stable connection between multiple pipe chain powder conveyors.

In addition, under the ultra-long conveying distance, the pipe chain powder conveyor can also be transported vertically, inclined and other multi-directional, multi-combination three-dimensional installation and transportation according to the needs of customers, and meet the customer's requirements for loading and discharging of conveying equipment by configuring multiple inlet and outlet ports.

In general, the maximum conveying distance of a single pipe chain is 60m, but the advantage of pipe chains is that they can be combined for transportation, so the conveying of ultra-long distances can be combined with two pipe chains. However, it also depends on the specific situation to choose the appropriate conveying method.

Hello: First of all, it depends on the volume and shape of the conveyed items.

Powder and granules can be connected by high and low drops, but there should be hoppers at the feed position of the conveyor at a lower level.

If it is a bag or box, it needs to turn the conveyor to connect the stool and grandchild.

The conveyed items are not afraid of falling or slight**, and a simple slide board can be used to complete the connection.

Theoretically, it's 40 meters. About this friend, you can also consult some companies specializing in bending pipe chain conveyors in China, such as Shanghai Kairuida, and call their company.

It depends on how much capacity and how thick the pipe diameter is. m, it is recommended to be segmented.

The conveying distance refers to the distance from the inlet signal to the outlet, and the general conveyor has a head and tail, so the conveying distance is shorter than the total length of the conveyor. Shangqiu Jiuchao grain machine production conveyor, they can go to the scene, to the manufacturer to give the design drawings to the song, can save a lot of costs for the factory Yetan sedan car.

The choice of conveying equipment is related to the nature of the material to be conveyed and the length of the conveying. For powder and granular materials, long-distance conveying, and conveying in a confined space, a pipe chain conveyor with multiple discharge openings is the most suitable. Anqiu Boyang Machinery is a professional manufacturer of conveying equipment, including pipe chain conveyors, screw conveyors, hoists, air chutes, belt conveyors and other conveying equipment, customers can choose their own conveying equipment according to their own needs.

Why? The selection of conveying equipment is not said to be so. The merchant does not change the !! of chaos

Chain conveyor is a kind of conveying equipment, which is widely used in building materials, construction, chemical industry, thermal power, grain processing, mining machinery, metallurgy and port and other industries. Due to the different requirements of the user's conveying materials, conveying volume, conveying distance, etc., the selection of large scale is also different, and the user needs to pay attention to the following aspects when selecting the appropriate equipment.

The following aspects need to be paid attention to when selecting chain conveyors:

1. The range of conveying capacity of different types of chain conveyors at different chain speeds. The same conveying capacity can be selected in the table to different models, if the larger model is selected, the chain speed is lower, the wear is small, but the investment in the equipment of the FU chain conveyor is higher, if the smaller model is selected, the chain speed is faster, and the wear is relatively high.

2. Adjustment of chain speed: select the chain speed according to the state of the material, and choose the slow speed for the materials with strong grinding, high temperature, large proportion of coarse particles and large particles.

3. Load: When selecting the chain conveyor, attention should be paid to the difference between the actual theoretical design conveying volume and the actual conveying volume. When the user actually uses, it is impossible to reach full load operation, that is to say, if the conveyor operation is theoretically calculated to be 10 tons of hours, and the actual conveying volume may only be more than 8 tons or more than 9 tons, it is impossible to reach the full load operation of 10 tons, so if you must reach the conveying volume of 10 tons required by the user, you need to choose a slightly larger type of equipment.

At the same time, the choice of a larger model can reduce the chain speed and prolong the service life, but when the conveying volume is less than one-third of the conveying volume, it will increase wear due to the formation of idling due to the thin material layer, that is, the load is usually too small.

Users should note that it is impossible for any equipment to convey 100% of the materials at full load, at most 80-90% of the full load capacity, so when the actual conveying volume does not reach 65% of the conveying capacity of the machine, the conveyor chain will be idling due to the thin material layer in the machine trough, which will also increase the wear and tear of the equipment.

Chain conveyors belong to the category of conveyors. The drive assembly is the running power part of the machine, which is composed of a drive sprocket group, an electric motor, a reducer, a shield, a funnel and a machine frame, and can be started and assembled with additional loads according to special functional requirements; The equipment is composed of hopper and conveyor chain and the connecting parts between them, which is an important assembly for conveying materials. At the same time, it is also a new product for the transportation of powdery and small granular materials.

Describe the precautions for chain conveyor selection.

Precautions for the selection of this equipment: due to the different chain speeds of the same equipment, the conveying volume is different. Therefore, the selection of equipment can be adjusted according to different conveying capacities.

After determining the chain speed, a more suitable transport capacity can be selected according to the transport capacity. The selection table for each type also shows that the greater the transport capacity, the longer the transport length, and the more power matching options there are. It should be pointed out that with the same transport capacity, the larger type can reduce the chain speed and thus extend the service life.

However, the conveying capacity should not be too small. If the actual volume is less than 3% of the machine's conveying capacity, the material layer is too thin, which will not cause idling and increase the wear on the opposite side.

1. The fixed belt conveyor should be installed on a solid foundation; Before the mobile belt conveyor is running, the wheels should be symmetrically wedged. When multiple machines are operating in parallel, there should be a passage of more than 1m between them. There should be no accumulation around the conveyor that hinders the work.

2. After the operation is completed, the power supply should be disconnected, the power switch box should be locked in the transmission drum, the sand on the conveyor should be removed, and the motor should be covered with a rainproof shield. During the operation, the operation of the machinery should be observed at any time, and when the conveyor belt is found to be loose or deviated, the machine should be stopped for adjustment.

3. When the reversing drum is started, it should be operated without load first, and only after the normal operation can it be evenly loaded, and it should not be started after loading first. When feeding, the center of the conveyor belt should be aligned and the height should be lowered to reduce the impact of the blanking on the conveyor belt and idler, and the feeding should be kept uniform.

4. When the power supply is interrupted or the machine is suddenly shut down due to other reasons, the power supply should be cut off immediately, the materials on the conveyor belt should be removed, and the power supply should be turned on to start the mobile conveyor after the call or troubleshooting.

5. During the operation, it is strictly forbidden for anyone to pass under the conveyor belt or cross from above. When the conveyor belt slips, it is strictly forbidden to pull it by hand. Adjusting the discharge height of the conveyor should be done when stopping. After adjustment, the connecting nut should be tightened and the safety pin should be inserted.

The discharge port should not be greater than the width of the chain, and a star-shaped discharger should be installed at the bottom of the scraper to discharge the material evenly.

The motor plus the inverter regulates the speed.

In fact, on the electric drum reducer of the conveyor, you can choose the appropriate speed ratio.