How to remedy the home improvement floor tiles if they are not flattened?

The floor tiles are not flattened, which is caused by the carelessness of the decoration master, and the situation that is not flattened is divided into two aspects.

The first case: the solidified cement (or other building materials that help solidify) are not dry.

This situation is relatively simple, only the decorator needs to gently tap the floor tiles with a wall knife until this brick is at the same level as the other bricks.

The second case: the solidified cement (or other building materials that help solidify) has dried up.

This situation is more complicated, if it is a few bricks uneven, you need to decorate the uneven floor tiles with tools to take out, and then you need to replace it with new bricks, and after doing it, the putty is brushed and flattened, and the cement is solidified.

If the area is uneven and the proportion is greater than 40%, it is recommended to dismantle the ground and start over.

When decorating, remember to order the line, the line is for parallel or perpendicular, but this is common sense, the decoration master understands, so the floor tiles are not flattened, it may be that the decoration master is careless.

Only re-paving, which is a more serious construction process problem, the long pain is not as good as the short pain; At the same time, you can ask the construction unit to rework and claim compensation according to this, and they have to buy some orders for their own inaction. It's basically going to be replaced.

Use a water mill to smooth out the obviously high places! I hope you're happy with this!

Hey, don't say anything, my family too, I think it's my own people, will do the job very well, in addition to the previous floor tiles when the surface of the floor tiles is removed, and then I don't know where the tiling master, basically the bricks in the living room are much higher in the same direction, and the corners of the floor tiles are uneven. Originally, I thought that people would watch it, but after all, I didn't have to worry about it, and finally gave tens of thousands of dollars more. Now it's okay, pay back your own people, because of the loss of face, the money is given, and I don't say a word of unpleasantness.

After the plan is finished, I smashed it and found someone to post it again. Sum up the experience, do any work that requires hands-on work in the future, don't use your own people, or your friends don't want to do it with him!

As far as the national standard for the flatness requirements of ceramic tiles is concerned, the standard is relatively relaxed. It is not more than the standard plane, such as 800 * 800 specifications of the tile converted to millimeters error value is, and the maximum error value does not exceed 2mm. From this point of view, it is difficult to estimate the difficulty of holding the tile party accountable.

x0d x0a Second: the paving specification of ceramic tiles requires that the height difference between the joints between bricks and bricks is less than, if the height difference between the joints exceeds , mm, the construction party should also temporarily stop the construction party, and notify the owner of the tiles.

Some people think that I have hired the most professional team and the most expensive design company, how can there be problems in my house during acceptance. If you think like this, then you are wrong, sometimes it is necessary to have the right time and place, if you are scattered from time to time, the earth is unfavorable, even if you are in harmony, there will be a situation! There was a situation in my house, and the tiles were uneven during the inspection, so I quickly asked the master to help me remedy it!

I asked the master, it turned out that there are so many reasons for uneven tiles!

How to remedy the unevenness of the bricks in the hole.

Rescue measures can be pressed with heavy objects, difficult to deal with the place, can be pressed with buckets, bricks and other heavy objects in time before the cement is not completely dry for a night, it will improve a lot, you can also use wooden strips to top, if the uneven place is more and more serious, it is recommended to take advantage of the cement is not solidified, with a wooden dragon to resist the uneven place, so that there is also a certain effect.

Causes of uneven tiles.

1. There is a problem with the tile itself.

According to Qeeka Home experts, it is possible that there was a problem when we bought it. Due to the high temperature firing, the tiles will have a faint arch back phenomenon. In fact, each tile is not absolutely flat, and there is a certain degree of upper arch in the center.

In general, this weak upper arch does not affect the paving result. If the arch exceeds the standard limit, the paving should be stopped.

2. Environmental reasons.

Foundation deformation, the master said that the building will produce a certain degree of settlement because of geological problems, different positions, different forces, inconsistent degree of settlement, over time there will be uneven ground, temperature, the so-called day from time to time is the influence of temperature, temperature difference changes greatly in the case of too low or too high temperature, will lead to tile deformation.

Conclusion: The above content is about how to remedy the unevenness of floor tiles? I hope it can help you. I believe that after the introduction of the content, you will have a better understanding of the reasons for the unevenness of the porcelain stupid bricks, and if there is a demand in the future, you can refer to it.

I believe that there are many people who are in the stage of decoration now, but now many people will pave after the selection of floor tiles, but many people will appear when paving floor tilesThe floor tiles are unevenI believe that many people want to know how to improve the unevenness of the floor tiles, let's take a look!

1. How to remedy uneven floor tiles?

1. The solidified cement is not dry; This situation is relatively simple, only the decorator needs to gently tap the floor tiles with a wall knife until this brick is at the same level as the other bricks.

2. The solidified cement has dried; This situation is more complicated, if it is a few bricks uneven, you need to decorate the uneven floor tiles with tools to take out, and then you need to replace it with new bricks, and after doing it, the putty is brushed and flattened, and the cement is solidified.

3. Remedy for uneven floor tiles: If a large area of floor tiles is uneven. It is recommended to rework them all.

In order to avoid injuries to your feet when you walk in the future. Let the master rework. 1 cent does not need to be added.

If it's a small area. Then the uneven bricks need to be reworked. Free rework.

If it's dry. Then you need to break the floor tiles and buy them again, and re-lay them.

Second, what are the reasons for uneven tiles?

The paving direction is incorrect.

In general, the bottom surface of the tile will have a brand logo and direction signs, and the direction signs can indicate the direction of the tiles when the plasterer is paved. Paving according to the direction signs can make the surface texture of the tile more smooth, and secondly, it can ensure that the edge of each brick is similar and the paving is relatively smooth.

Many home improvement bricklayers ignore the direction signs and do not follow the direction of the arrows, which is prone to uneven joints at the corners.

The brick joints are too thin. Almost every tile has slight deviations in length, straight angle, edge straightness, etc. If there is no seam, when the height difference between the edge of the tile is slightly larger, the joint will be visually uneven.

Seamless paving is also easy to cause the tile to bulge and arch when it expands and shrinks in heat, and even cracks in severe cases.

The tiles were not knocked out after paving.

After the tile is pasted to the ground, because the cement mortar is still in a semi-dry state, the mortar needs to be pressed down by beating to make the cement mortar evenly distributed under the tile, so as to avoid uneven force on the tile when the cement is solidified, which affects the flatness. Many times the paving workers ignore this step and do not knock the bricks solidly.

The ratio of cement mortar is incorrect.

Traditional paving generally uses cement and sand on-site mixing as a binder, where the ratio of cement and sand is very important. If the ratio is not right, the proportion of sand is too high, or the adhesive is not added to the mortar, it will cause the cement mortar to stick to the tiles and the floor tiles will be upturned.

This is the end of the introduction to the improvement of uneven floor tiles, I believe that through the above introduction, you will understand the uneven floor tiles improvement methods and the causes of uneven floor tiles. When decorating a new house for paving floor tiles, there are a lot of things to pay attention to, and you need to pay more attention to the disadvantages to avoid the problem of uneven floor tiles.

After the floor tiles are paved, it is found that it is uneven, and the method of remedy:

1. If the solidified cement is not dry, you only need to gently knock the floor tiles with a wall knife until this brick is at the same level as other bricks.

2. The solidified cement has dried, if it is a few uneven bricks, you need to use tools to take out the uneven floor tiles, and then you need to replace it with new bricks.

3. If the floor tiles in a large area are uneven, it is recommended to rework them all.

Causes of uneven floor tiles:

1. In the process of paving the tiles, if the construction workers do not pave in accordance with the arrow direction on the back of the tile, the wrong operation will lead to the overall unevenness of the tile after the completion of the paving, so it is necessary to remind the construction personnel at the beginning whether to pave in accordance with the direction of the arrow.

2. Some owners will require the construction personnel to seamlessly pave the tiles, although the tiles are beautiful, but the pursuit of beauty should also pay attention to the quality. Tiles paved in this way, it is easy to appear uneven in the later stage, whether you know how to pave tiles or not, the first thing to remember is that it is taboo to paste tiles without leaving seams!