What should I do if the fish tank keeps leaking after changing the water in the fish tank?

If there is a leak, the old fish tank is made of silicone, and it is common to "blister" or peel off due to the action of bacteria and moss at the joints. At some point, the fish tank will leak. The plastic fish tank will extend with time, the softener volatilizes and fails, and the plastic material becomes embrittle, as long as a small extrusion force or impact is given, cracking and leakage are inevitable.

If the leak occurs in the upper part of the tank, it may not be a big problem because the water is lowered to the hole and stops. If the leak occurs near the bottom of the tank, it is a big problem and all the fish can be exposed to the air. If the water in the fish tank is found before it leaks, the remaining water can generally be moved to the recreation tank or plastic bucket or basin with the fish, and the inflatable pump or submersible pump can be used.

Make the water in a moving state.

The reason for the rupture is almost all the uneven bottom of the fish tank, especially the left and right ends are high and low in the middle or the two ends are low and high in the middle, and the fish tank is subjected to huge water pressure, often breaking transversely from the middle, or diagonally from the middle to one side. This fracture often leaks water, and it is likely to leak the water of the whole cylinder, because the glass on both sides is often not on the same plane after the fracture.

Finally, due to the old-fashioned "five-piece fish tank" due to disrepair, poor quality of silicone and other reasons, the solution is to use a carving knife or knife to scrape off the loophole and nearby (at least 2 cm), and re-fill the special glass glue for the fish tank. Can.

Fish tank leakage inspection: 1. Check whether the filter pump is leaking when it is working. If there is a water leak, it is the leakage of the plastic seam of the fish tank or the loose tee joint of the fish tank tee.

2. Turn off the filter pump, open the filter pump without leakage, close the filter pump leakage, mostly because there are cracks at the live connection or the water inlet is too deep, and the phenomenon of siphon backflow occurs. Solution: 1. Take out the fish and other things in the fish tank, drain the water, wait for the fish tank to dry thoroughly, pour the glass glue into the leakage point with a glue gun, and then coat a layer of glass glue on the fish tank outside, 1 The fish tank can be used after a few days.

2. Just wait for the fish tank to dry thoroughly, coat the cracks with glass glue inside and outside, and seal them well. It is better to stick a piece of glass on the outside. Extended Information:

Maintenance of the fish tank: 1. If you use a filter outside the box, you must connect the water pipe after cleaning. Note that the pump can both filter and pump water out of the tank.

2. Always check whether the amount of water flowing out of the filter is normal and whether there is any blockage. In addition, the first layer of bio-sponges or filters that block dirt should be cleaned frequently and replaced regularly. 3. Activated carbon should be replaced regularly.

4.Clean the protein skimmer regularly from dirt. 5.

If the fish tank keeps leaking, then you have to check where the water is leaking, the general leakage is not easy to see, this kind of as long as the ** replacement, in fact, it is okay.

Summary. Hello, I am happy to serve you to find out why the water change of the Sensen fish tank does not come out of the water, and the answer is: The reason why the water does not come out of the Sensen fish tank filter is that the water inlet and outlet of the pump head should not be reversed, otherwise the water will not be pumped.

Hello, I am very happy to serve you, for you Shankai to inquire Why the water change of Sensen fish tank touches the core but does not produce water, and the answer is: The reason why the water does not come out of the water filter of Sensen fish tank is that the water inlet and outlet of the pump head should not be reversed, otherwise you will not be able to pump water.

The reason for the water is that the water inlet and outlet of the pump head should not be reversed, otherwise the water will not be pumped up. If the fish tank filter is not pumped, it must be checked in time to see if it is a power outage or broken, or the water outlet is blocked, which needs to be cleaned, and there is a possibility that the suction pipe has entered the air, so the inlet and outlet should be filled with water and then put it into the Jinchang tank Jing chain.

Filter features high efficiency, precise filtration, special structure of filter disc filtration technology, accurate and sensitive performance, only the particle size is less than the required particles can enter the system, is the most effective filtration system, specifications have 5, 10, 20, 55, 100, 130, 200 and so on, users can choose different precision filter discs according to water requirements. The system flow rate can be flexibly adjusted according to requirements. Standard modularization, saving land space, the system is based on the standard disc filter unit, according to the modular design, the user can choose according to the needs, flexible and changeable, strong interchangeability.

The system is compact, occupies a very small area, and can be flexibly installed by using the corner space for installation, such as the treatment of about 300 cubic meters of water per hour, and the installation covers an area of only about 6 square meters.

The first thing to do is to find the location of the leakage, which is generally divided into two situations, one is the glass is damaged, and the other is the aging of the glass glue. If it is a Zen math problem with glass code, it is often difficult to repair it, because the whole glass needs to be replaced. If there is a problem with the glass glue, you only need to fill the glue in the leaky place, and you need to fish out the fish and drain the water before repairing the glue.

If there is a leak in the fish tank, it may be caused by trachoma at the glass bond, or it is caused by the cracking of the adhesive, and the water and fish in the fish tank need to be temporarily transferred to another container, and the crack is sealed with glass glue, and it can be used again after 36 hours without leakage.

What should I do if there is a leak in the fish tank during the process of raising water? First of all, you need to temporarily transfer the water and fish in the fish tank to another container, do not pour the water directly and raise the fish in other water, otherwise the fish will not adapt.

Then clean the fish tank and dry the fish tank to find the cause of the leakage. After finding the cause, you can use glass glue to glue the cracked part of the fish tank, wait until 36 hours later, and then put it into the water to test whether the fish tank is leaking, and if it does not leak, you can continue to use it.

But in fact, if there is a leakage in the fish tank, it is generally caused by the presence of bonded trachoma at the glass bond, or the cracking of the bonded glue, as long as the crack is glued with glass glue, it is easier to deal with.