What should I do if there is water stored between the waterproof layer and the tiles in the bathroom

There is water between the waterproof layer and the tile in the bathroom, then you need to repair the bathroom again, otherwise, after a long time, the gap between the waterproof and the tile will become larger and larger, if the water accumulates, it will affect the floor below, and the problem will be very big in the future, and there will be a lot of trouble, so it should be repaired as soon as possible.

As long as the amount of water stored is not large, the waterproof layer does not leak and there is no big problem, and it is best to find a way to dry it as soon as possible. It must be difficult to maintain hygiene and other flavors after a long time.

You can find a waterproof company to carry out a treatment, often to make a small hole, and then inject cement slurry, you can solve this problem, there is no need to reinstall the tiles, if there is no leakage downstairs, there is no big problem in a short time.

What to do with the storage of water between the bathroom waterproof layer and the tiles, whether there is a big problem, the bathroom waterproof is stored between the clothing, it is better to dredge it in time if you are full, so that there will be no accumulation of water If this is the case, if you have a little water, it should be no big deal, because there is a waterproof layer below.

Generally speaking, it doesn't matter, but if there is standing water for a long time, it will definitely affect the safety of the house because of the slow infiltration.

As long as the waterproof layer does not leak between the waterproof layer of the bathroom and the tile, there is no big problem, so it does not affect the use.

If there is water between the waterproofing layer and the tile. This part of the water should also be removed, otherwise it will be soaked for a long time, so that water will slowly seep out.

As long as it's not leaking, the water can still drain out of the sewer pipe, it's fine

The bathroom floor in the structure is generally a cast-in-place board, if the surface of the bathroom cast-in-place board is higher than the floor of the living room, it is not feasible to change the bathroom floor to a lower plan. The most effective way to save money is to add a threshold at the door of the bathroom, and the waterproof layer of the bathroom should be done together with the threshold to form an overall waterproof layer. There is also a way, that is, to walk the PPR pipe to the wall, the pipe will be used more, but the thickness of the mortar on the ground can be reduced; If there is a stucco layer on the cast-in-situ board on the bathroom floor, half a water pipe can also be buried in a slot; Multiple solutions go hand in hand, and there is always a way to solve the problem.

What to do if there is water between the waterproof layer of the bathroom and the tiles, there is great love not for the affirmation that the most wall is not good. Because if there is water in the tile, the tile will not stick to the wall, so it will come off.

The water union will reserve a drainage hole in the sewer pipe, and the water between the waterproof layer and the tile will be drained out without any problems.

What should I do if there is water stored between the waterproof layer and the tiles in the bathroom? I think that if there is water between the waterproof layer of the bathroom and the tiles, it must be easy for the tiles to damage their life.

This is definitely not going to work, it needs to be reworked, and it has to be waterproofed again, because it will penetrate the wall next to it, which will also leak underneath, and the post-processing is very troublesome, so I think you should deal with it.

Consequences: It stinks and turns black.

According to the general process, to do waterproofing, you can only wet pave the floor tiles, and there must be cavities.

As long as your waterproofing layer is done well, there is no problem.

Or you use foam glue to walk the tile peaks all over again.

If there is water between the waterproof cabin and the tiles in the bathroom, then I think this should be able to use some water, so it should be relatively good, and this should be able to better protect a strong next to it should not cause a uh collapse, so this should still be paid attention to.

The waterproof layer of the bathroom and the water in the middle of the tile should first see if there is a leakage point, and make up for it in time, otherwise it will affect the compensation downstairs.

Water is stored between the waterproof layer of the bathroom and the tiles, and it can be sealed with sealant. Otherwise, it will leak in the long run.

If there is spring water between the waterproof layer and the tile, it will loosen the tile over time, so treat it as soon as possible.

What should I do if there is water stored between the waterproof layer and the tiles in the bathroom? There is no big problem

Hello friend, as long as the waterproof layer has been made, don't worry, his water is blocked by the waterproof layer, which means that he has a place of anti-moisture or water seepage, which is no big problem. That water can slowly evaporate, leave it alone, and don't need special treatment. As long as the water does not continue to seep out, it means that the waterproof layer is very good and effective.

What should I do if there is water stored between the waterproof layer and the tiles in the bathroom? There is no big problem

If the problem that is not the foundation waterproof has been ruled out, the problem of water leakage can be easily dealt with. Use a sharp tool to clean the cement of the original caulking of all the tiles in the bathroom, and clean it as deep as possible. Then go to the building materials store to buy two packs of special ultra-fine seam anti-mildew caulk for ceramic tiles (there are many fakes on the market, it is recommended to buy:

JCDecaux, Leibangshi, Sika, Henkel, Mapei and other brands), according to the instructions after the water is allocated, according to the instructions to press into the tile gap at one time, when the caulking material is not dry, use a sponge to wet the water to wipe off the excess caulking material on the tile. At the same time, make a 2-high water retaining platform that is tightly bonded to the bathroom floor at the position of the bathroom door. The bathroom tries its best to keep the ground with open water, and sweep the floor drain as soon as possible to drain if there is open water.

Enter the area and get the decoration for free**].

Waterproofing work is an indispensable step in the bathroom decoration, once the waterproof measures of the bathroom are not in place, there may be a resurgence of moisture or even water leakage, causing unnecessary trouble, so will the bathroom waterproof layer store water? What are the steps of waterproofing construction in the bathroom? Let's take a look!

1. Will the waterproof layer of the bathroom store water Under normal circumstances, the waterproof layer of the bathroom will not store water. If there is water storage in the waterproof layer of the bathroom, it may be because in the process of laying the bathroom floor tiles, the slope left is not enough, resulting in the problem of local unevenness on the ground, or it may be because the floor drain is installed in the wrong position, or after the installation of sanitary ware, the water flow is blocked, so that the family shouts to store water. 2. What are the steps of bathroom waterproof construction 1. Before the bathroom waterproof construction, the base of the bathroom should first be cleaned up to ensure that the base of the bathroom is free of ash and dust, and all the inlet and outlet pipes in the bathroom need to be sealed, and the sealing effect must be good, which directly affects the construction effect of the bathroom waterproofing.

2. After cleaning the toilet base, we can start to paint the waterproof layer, the number of brushing of the waterproof layer shall not be less than three times, and after each waterproof layer, the time interval of the next application of the waterproof layer shall not be less than 36 hours, to ensure that the waterproof layer of the last painting is dry, and the next waterproof layer can be painted. 3. After the waterproof layer is painted, in order to ensure that the waterproof layer can play a good waterproof effect, it is necessary to test the waterproof layer. First of all, it is necessary to fill the waterproof layer of the toilet with water, and after standing for two to three days, observe whether the waterproof layer of the bathroom is leaking, and if not, you can continue to the next construction step.

Summary; The relevant content of the waterproof layer of the bathroom will store water is introduced to you here, I hope to help friends in need. When doing the waterproof construction of the bathroom, you must ask professional construction personnel to operate, so as not to cause unnecessary trouble and have a negative impact on the normal life of yourself and your family.

Calculate how much it will cost you to renovate your home

I believe that many friends in the decoration of the project, will feel that the bathroom tiles and waterproof can not be both, because there is a lot of news about the wall tiles falling off the bathroom. It is true that after the wall is waterproofed, the bricks will not stick firmly, which is easy to produce hollowing, and at the same time, the tiles will easily fall off. So whyAfter the bathroom wall is waterproofed, the tiles are easy to topThis?

Because the water on the surface of the tile cannot penetrate the wall.

The back of the tile is smeared with cement mortar, in which the moisture would have penetrated into the wall and then dried and solidified, so that the tile was firmly glued to the wall, but the waterproof layer blocked the penetration of water, and the moisture on the back of the tile could not be dried, and the tile could not be sticked, and Jian Yuanyu made the wall of the waterproof layer is particularly smooth, and the tile is not only sticky but also easy to produce hollowing. Don't for some families, in order to pursue good looks, especially like to use floor tiles on the wall, so not to mention how strong the tiles are, it will not take long to fall off, resulting in waste, and remediation is a big project.

In fact, the method of preventing bathroom tiles from falling off is very simple, after the bathroom wall waterproofing is done, it needs to be covered with a layer of cement protective layer, the surface of the cement layer is very smooth after the cement layer is done, and it needs to be brushed. The decoration construction of the bathroom is a high-demand job, but some construction workers work with low quality and lack of professional knowledge, and the work steps can be saved.

The above is why the bathroom wall is easy to explain after the tile is waterproof, the bathroom wall is a must to do waterproofing, as long as the construction is strictly in accordance with the specifications, the bathroom tiles will not fall off so easily, you must not cut corners in order to rush the work.

You can get it for free

When the bathroom is decorated, we all like to pave bathroom tiles on the wall, ceramic tiles can improve the aesthetics of the bathroom, I don't know if the family has been paved with tiles, whether there is trouble with bathroom tile leakage. There are many situations that lead to water seepage in tile losses, either the quality of the tiles is poor, or the quality of the hall jujube is not passed, resulting in gaps, and then the water pipe and the tile junction are not sealed in place. The following is an introduction to what to do if the bathroom tiles are leaking.

What to do if the bathroom tile is leaking.

1. Find the cause of the wall leakage.

There are two kinds of leakage on the wall of the bathroom, one is caused by the leakage of the water pipe, and the other is caused by the leakage of the waterproof layer, so when solving the problem of leakage on the wall of the bathroom, it is necessary to distinguish what causes the leakage.

2. Judge the problem of water pipes.

First of all, according to the construction drawings to see the direction of the water pipe, if there is a water pipe buried behind the leakage position, you can take advantage of the travel or not at home, turn off the sluice gate in the home, and clear the water in the faucet.

3. Judge the problem of the waterproof layer.

After the shower, there was a leak in the wall of the bathroom with a clear backwater, and after a period of interval, it was found that the leakage on the wall had improved, which proved that there was a problem with the waterproof layer.

Bathroom tile water seepage solution.

If there is a problem with the waterproof layer, the tiles must be removed, the wall must be hit to the waterproof layer, and it is better to see the inner wall, and then scrape the putty again, re-make the waterproof layer for the wall, and then pave the tiles.

The second is that the water pipe rupture leads to water seepage, in this case, the water pipe needs to be tested to see if there is a water leakage, if it is indeed caused by the water pipe damage, to find out the leakage immediately, open the wall and replace the water pipe.

If the wall is only leaking because of moisture, you only need to pay more attention to the ventilation and cleaning of the bathroom in your daily life.

If the tile gap is not good, there is water seepage. First you need to use cement or caulk to fix the cracks, and then make a layer of waterproofing.

Clause.

1. Why does the bathroom floor slope Because there is a lot of water in the bathroom, in order to let the water flow into the floor drain as soon as possible, the ground must do a certain slope, and there is no specific regulation on the size of the slope. Some owners need a steeper slope, in order to make the water flow faster, even if the water is not smooth, when bathing, the water will not flow outside. Clause.

2. What is the standard of drainage slope The ground elevation design of the bathroom should be 20 50mm lower than that of the interior. The ground is facing the drain, and the drainage slope is 2% and 3% for the first voyage. Toilet backfill, leveling, should be drained as the center to the four directions of radiation, find the slope, scrape with a ruler, plastering surface requirements flat, no pits, no gaps, no sand, no water accumulation.

Not only the ground needs a slope, but also pay attention to the slope of the water pipe when installing the water pipe, the slope of the water supply horizontal pipe to the water discharge device or water distribution point, and the water supply pipe should have a slope of not less than the slope to the outdoor water supply pipe.