What should I do if the balcony leaks and causes the wall to blister and fall?

Bay windows and window sills seepage, first of all, you have to find out the seepage point, just like a person is sick, you have to find out, in order to prescribe the right medicine, so that you can treat the symptoms and cure the root cause. Generally, bay windows and window sills are leaking for the following reasons:

1: The gap between the bay window and the outer wall of the window sill is not tightly sealed, resulting in rainwater leaking into the house through the gap, and the wall putty powder will become moldy and fall off after being damp. <>

3: Sometimes the leakage hole of the bay window is blocked, and the water cannot be discharged in time, which will slowly penetrate into the wall along the connection gap of the window frame, which will also cause the inner wall to become moldy and fall off after being damp.

Only by finding out the cause of water seepage can we give a solution, and if we want to completely prevent water infiltration, we can only find a solution on the outer wall, which is the root cause, and find a way to solve water infiltration on the inner wall, which is a symptom, and can only be solved for a while, and after a long time, the same problem will occur, just like a bag, little by little to fill water, and when the water exceeds its bearing range, it will break.

Solution: 1: If it is water seepage in the gap between the bay window and the window sill, cut off the previous sealant with a utility blade, clean it up, use weather-resistant silicone sealant, make the glue nozzle bigger, cover the range of the previous sealant, tie it strong, firm, and there is no joint gap. <>

2: If it is a gap when the exterior wall is painted, you can clean the exterior wall surface, paint it twice with flexible waterproof adhesive, and then brush a layer of cement on the surface after drying, which is to protect the waterproof adhesive from being blown by the wind and sun, and the service life is longer.

If the exterior wall has been tiled, clean the tile surface as well and use a flexible transparent waterproof cross brush twice to completely prevent water from leaking into the room through the small holes. 3: The leakage hole of the bay window should be dredged frequently, and a layer of sealant can also be applied to the connection gap of the main frame to prevent the leakage hole from penetrating down through the connection gap after being blocked.

The above is a way to prevent the penetration of water from the outside, and then talk about the solution to the indoor wall that is damp and moldy and falls off

Remove the damp and moldy wall, shovel it clean, wait for the wall to dry thoroughly, paint a layer of wall solid, and then hang a layer of fiber mesh (to prevent cracking), add a little sodium bicarbonate with the tempered putty powder of the exterior wall (to prevent mildew spots from not being cleaned up), scrape 2 3 times on the wall (dry a layer and scrape a layer), after drying, polish with 600 mesh fine sand, clean up the surface dust, and finally brush latex paint, if there is a primer, you can brush the primer first, and then brush the topcoat twice, pay attention to one point, when brushing latex paint, it is also dry and then brush the second time, Otherwise, it is easy to peel.

First of all, the leaky part should be dealt with, then the wall skin should be removed, putty should be smeared, and it should be repainted.

If it is because the glue of the window frame is not good and the water seepage is caused by it, you can clean up the old glue, and then re-apply the structural glue to seal, remember that the glue should be made wider. If it is caused by water seepage on the façade of the wall, the exterior wall can be sprayed with a transparent waterproof penetrant to let the penetrant penetrate into the wall to form a dense waterproof layer to block the penetration of water.

Knock off the floor tiles of the balcony, lay a layer of linoleum underneath, and then put the floor tiles on top so that there will be no leakage.

If the balcony leaks water and bubbles out, in this case, it must be that his waterproofing is not done, so it is necessary to redo the waterproofing in time, and then do a waterproof experiment to see if the leakage is leaking, so that the next step will be done.

Well, the floor drain is leaking out of the water, indicating that the pipe is blocked at the bottom, and there is no way to go down, so you can only go up, you can find the kind of pipe, there should be a lot on the street, generally on the side of the road, you go to look for it, or go to the city to find this kind of pipe cleaning. Or ask the hardware store to know. There is something to solve as soon as possible, otherwise the water keeps bubbling out, this water is very dirty, especially when the weather is so hot, I wish you to solve it as soon as possible.

If this is the case, it may be that the floor drain is blocked, or there is a certain problem with the floor drain, so let the maintenance personnel replace the floor drain, or dredge the floor drain, which can solve this problem.

The main sewer pipe is blocked, dredge it, the main pipe is a bit blocked under your house, when the people above your house are using water, due to the poor flow, it will come out from the floor drain of your house.

Hello friend, the Yantai floor drain is bubbling out, it may be that there are foreign objects in the floor drain, you can dredge it. If there is a foreign substance in it, and the water flow is slow, it will have a bubbling sensation.

Find a property manager or find a landlord.

??Houses are built to provide people with a stable place to live, and a good house should not be afraid of wind and rain. However, some people report that whenever it rains in their homes, there will be water seepage and leakage on the walls, which is mostly due to the leakage of the external walls.

If there is a leak in the exterior wall, it should be dealt with in time. So, how to deal with a leak in an exterior wall? Let's follow Tuba Rabbit to see the specific solution to the leakage of the exterior wall.

?Since there is a problem of external wall leakage, it needs to be repaired in time, so that it will not affect the engineering structure of the whole house because of the relationship between the external wall leakage, shorten the life of the building, safety, etc., resulting in serious corrosion of the building, so that it collapses and so on, affecting the lives of residents. When the external wall leakage occurs, it should be possible to find the cause of the external wall leakage, and then deal with it in time to avoid the external wall leakage becoming more and more serious.

The common solutions mainly include: 1. Find the location of water seepage, chisel the water seepage area of the outer wall, conduct testing, find the root cause of water seepage, and then deal with it. 2. If it is 3, after the inside is repaired, the exterior wall also needs to be repaired, mainly with 4, carefully find the main reason for the leakage of the exterior wall on the wall (1) the design factor waterproof treatment is the house (2) the material factor (3) the construction factor From the construction point of view, because of the first, second, in the construction process of the building wall, the mortar of the leveling layer and the plastering layer is not configured in accordance with the standard design, which then causes the change of mortar strength, and causes the leakage of the wall based on the occurrence of the problem of dry shrinkage cracking; Thirdly, in the construction process, there is a problem of insufficient adhesion between the exterior wall bricks and the mortar of the bottom, which then causes the occurrence of hollow drum disease, and the hook joints of the facing bricks are not dense enough, and the problem of trachoma or cracks occurs, causing water seepage on the wall; Fourth, in the construction of the slope of the window sill of the house building, drop fifth, in the process of building construction, various pipes through the exterior wall and the sealing treatment of different reserved holes are not done, which will also cause the leakage of the wall of the house building.

If the construction can be more rigorous, then there will be no external wall leakage after completion, which will affect people's actual use of the house. How to deal with exterior wall leakage? The sooner the exterior wall leakage is treated, the faster the damaged house can be restored to normal, so that your living environment will not be affected.

When dealing with exterior wall leakage, you can use these methods introduced in the article, or you can transfer the exterior wall leakage matter to a professional person, so that they can help you effectively deal with the exterior wall leakage, so that your exterior wall will no longer have the problem of water leakage.

The premise is that the water leakage problem of the bedroom bay window and window sill should be rectified before the problem of bubble bursting of latex paint can be solved. If it is due to the leakage caused by the glue of the window frame, the old glue can be cleaned up, and then add the weatherproof glue again to seal it, and remember that the glue should be played a little wider. If it is caused by leakage in the façade of the wall, the exterior wall can be sprayed with a fully transparent waterproof penetrant.

I let the infiltrate penetrate into the inner structure of the wall and establish a high-density floor waterproofing to prevent water from penetrating. There are some young construction management personnel who are greedy for beauty and generosity at that time, do not understand and do not care what the effect will be in the future, do not listen to the advice of others, think of themselves, pretentious, a bottle of dissatisfaction, half a can of swaying, to lead to many conclusions that can not be sorted out later. As far as the seepage of precipitation around the window is concerned, it is impossible to leak around the window if the sealant is used first and then sprayed or sprayed with Jinding paint.

The leakage of the upper end of the window should be the problem of water seepage on the outer wall of the window.

The surface layer of the window wall is cracked or the backwater edge is ineffective. The backwater edge is the concave groove of the wall at the upper end of the window, or the retaining edge, in order to prevent precipitation from flowing into the window along the wall, the upper end of the window wall is generally set. The gap between the bedroom bay window and the balcony wall is not tightly sealed, resulting in precipitation leaking into the home according to the gap when it rains, and the wall putty powder grows moldy and falls down after the moisture returns.

If it is the original window structure of the engineering building, if you have not touched it, you must notify the property for maintenance.

If it is your own new window, it is possible that the sealant of the internal structure is not closely related to the foam glue, and you must re-apply it. You can first remove these rubber seals that have cracked due to aging, clean these locations until there are no residues such as oil stains and dust on the surface, and then add a certain ratio of waterproof sealant with waterproof powder to synthesize moisture-proof polyurethane coatings, which are used to fill laminated glass and window joints.

1. If you want to make the bay window and balcony not seepage in the future, you can naturally solve these two problems after dealing with them, that is, repair the bay window frame and the exterior wall to re-do waterproofing or increase the waterproof function. Solve the problem of no further water seepage, and then repaint the wall that has been blistered. Let's talk about the problem of water seepage in the bay window first.

2. If it is determined that there is a problem with the leakage and sealing of the window frame of the bay window, then the original sealing material needs to be peeled off first, and then the gaps in these window frames should be cleaned up. Then buy waterproof powder and waterproof sealant again, blend them according to the instructions, and reseal the bay window, so that rainwater will no longer seep into the walls of the house through these cracks.

If after the decoration is completed, it is found that the balcony and bay window are leaking, then it means that the sealing strip of the window is not done well, and the part of the window needs to be redecorated.

How should bay windows and balconies seep water, and the walls blister and fall? Leaking bay windows have long been a major concern for residents of high-rise buildings, especially during the rainy season, when the inner walls and floors of bay windows are often damaged by water leaks. Therefore, it is a particularly important thing to do a good job of window leakage, but many families have not paid attention to it, today we will talk to you about what kind of waterproof glue is used for window leakage, and whether the interior of the window needs to be waterproofed.

Friends who have been in contact with home decoration know that the commonly used method of filling the leakage of the bay window is to use waterproof glue, so what kind of waterproof glue is used to fill the leakage of the bay window?

<> is actually a good problem, you just need to choose the corresponding waterproof glue according to the actual cause of your home water leakage. For example, since there are gaps that cause leakage during the installation of floating windows, it is correct to choose a waterproof adhesive with strong sealing. Both outward and inward bay windows need to be waterproofed, but there are still many families who don't pay attention to the waterproofing of bay windows.

You know, the bay window is to withstand the sun and rain for a long time, waterproofing is to reduce a series of troubles caused by the leakage of the bay window, such as water dripping powder on the wall, blisters and arching of the floor, these maintenance items have to deal with at least 1,800 children, with this money for repairs, it is best to use the bay window waterproofing.

When looking for a window sill leakage repair company, we must find a company with high-altitude construction qualifications, because the repair of window sill leakage is a project involving high-altitude construction, and ordinary maintenance personnel can't do it. The above is about what kind of waterproofing glue is good for the leakage of bay windows, whether inner bay windows need to be waterproofed, and so on. If you have other concerns about the maintenance and renovation of your house, you can send me a personal letter and a message.

The above is a detailed interpretation of the problem, I hope it will help you, if you have any questions, you can leave me a message in the comment area, you can comment with me, if there is something wrong, you can also interact with me more, if you like the author, you can also follow me, your like is the biggest help to me, thank you.

The treatment method of wall blistering and falling caused by water seepage in bay windows and balconies should first manage the problem of water seepage in bay windows and balconies to deal with the problem of blistering and falling of interior wall paint.

For example, in the case of water seepage in the bay window, the first thing to check is how the water leaks in. If it is due to poor glue on the window frame that causes water seepage, we can clean up the old glue, and then re-seal the structural glue, remembering that the glue should be wide. If the outer façade of the wall is caused by water seepage, the exterior wall can be resprayed with transparent waterproof slurry to make the slurry penetrate into the wall to form a dense waterproof layer to prevent water infiltration.

To deal with the problem of falling bubbles in the exterior wall, clean the paint layer of the bubbling tube, brush the alkali resistance agent again, and scrape the putty in dry batches.

The wall seeps water not only from the bay window balcony, but also from the exterior wall modeling, other windows, and even the holes of fixed scaffolding and various exterior wall supports, all of which are hidden dangers of water seepage in the exterior wall.

Note: Try to close doors and windows as much as possible and keep a cool and dry place. Remember not to get out of direct sunlight to make drying faster, and don't use sunlamps for lighting.

This wisdom accelerates the surface to dry faster, while the inside doesn't dry so quickly, and the internal drying progress is inconsistent, which can have a big impact on the quality of the paint! Remember!

Check whether there are particles or other phenomena that are not in place, if there is timely repair and polishing, if not, wait until it is dry to completely solve the problem of peeling, blistering, mildew and yellowing!

Water seepage depends on the original window seepage or your newly installed window seepage. If it is a building with original windows and you have not moved, you need to notify the property for maintenance. If it is your own new window, it may be that the internal sealant and foam glue are not closely related, and you need to play again.

If it is a leak in the window sill structure (leakage at the bottom of the window sill), it is likely that the external wall is leaking rather than the relationship between the windows, and it is also necessary to contact the property for the external wall leakage. Wooden window sills are a relatively early practice, generally used in old houses or European decoration, but wooden windows are easy to deform, especially under the erosion of sun and rain, there will be this problem, so please consider, marble or artificial marble is a good choice.