Is it okay to spill a bottle of DDV directly on the wooden floor?

Of course not, how can pesticides be spilled directly on the floor??

Maintenance of wooden floors:

1. Keep the floor dry and clean, and avoid contact with a lot of water. It is not allowed to scrub with corrosive liquids such as alkaline water and soapy water to avoid damage to the paint film, and it can be wiped with a wrung out cotton mop, not with a wet mop, gasoline, flammable materials and high-temperature liquids.

2. Waxing every once in a while, the time interval depends on the finish of the floor paint. The method is to first wipe the floor with a semi-dry rag and wax it. To spread evenly and "soak" the floor surface, wait for it to dry a little and then wipe it back and forth with a soft cloth until it is smooth and translucent.

3. If you accidentally pour water or leave water on the ground, you must wipe it with a dry soft cloth in time. After wiping it clean, do not directly expose it to the sun or bake it on an electric stove, so as not to dry too quickly and the floor will dry and crack.

4. Do not throw cigarette butts or matches and other kindling on the floor to avoid scorching the surface of the floor; Avoid sharp, sharp objects, scratches, and heavy objects that are pressed for long periods of time.

5. After paving, the floor should be exposed to direct sunlight as much as possible, so as to avoid excessive ultraviolet radiation of the paint and early cracking and aging.

6. If the paved floor is not inhabited for a long time, it is necessary to open the window frequently for ventilation, and do not cover it with plastic sheets or newspapers. Over time, the paint film will become sticky and lose its luster. At the same time, do not directly contact the floor with objects with high temperatures, if the indoor air humidity is lower than 40, you need to increase the temperature appropriately, if the humidity is greater than 100, you need to take dehumidification measures.

Definitely not pesticides are very corrosive.

Wipe off with a dry towel and a few more times with a damp towel.

Use a sponge to blot the alcohol and leave it alone, it will slowly evaporate.

Leave it alone, it will naturally volatilize.

Just rub it with a damp towel. There are many similar tricks in the Chinese flooring decoration column.

Banana water is ineffective against 502 glue, only acetone can be dissolved, the problem is that most of the paint on the wooden floor will also be melted [except for natural paint] Generally, 502 glue is very brittle after drying, take something and knock on it, and then scratch it should be effective, you try. If you don't care about it for a long time, it should be slowly worn off. There is also a point that 502 glue is not heat-resistant, and the temperature of the general electric soldering iron will smoke and fall off.

I have encountered it, and the final solution is to use China Resources' professional glue, which does not hurt the floor, not advertising, a few pieces.

Drip on top of the 502 glue with China Resources high-efficiency adhesive remover'After 30 seconds, it can be removed. Does not hurt the floor paint.

Very many people have used it. has no effect on wooden floors.

Give it a try.

Mix banana water in a ratio of 1:10-12, wash and then smear with egg white.

1. You can use a wet hot towel to stick 502 there. After ten minutes, the cured 502 will become soft and can be removed. In addition, you can put a drop of 502 on the place where there is 502, and the cured 502 will also become soft, so it can be removed with a towel.

2. With insulating oil, pour the insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly.

3. Stick 502 glue on a small area, as long as you soak it in hot water for 2 3 minutes, if you stain a large area with 502 glue, coat it with acetone, and wait about 5 10 minutes to remove it.

In fact, whether this wooden floor is good or not mainly depends on personal preference. I really like wooden floors, except for the kitchen and bathroom, the home is equipped with wooden floors. If you want to recommend, I think it's not bad to use Jiuyang flooring at home.

In fact, at the beginning, I didn't know what brand this was, so I inadvertently walked into their store, and the waiter told me that their floors could be traced, and there was a place of origin behind each floor. I've been using it for a few years now, it's not bad, it's not deformed, and after waxing, it's still the same as a new one.

It is best to remove the flushing, which will make the indoor height lower and have a sense of oppression; And it's not going to be uneven.

Yes, if you are in the store, you can just put a layer of laminate flooring on the floor, because the bottom is very flat, and the effect will be better.

OK. It won't be much taller. At most, it is not more than thick laminate flooring. The thin one is only 8 miles.

Is the old floor firm? Make level?

If it is firm and flat, you can directly nail it to the solid wood flooring, or directly lay multi-layer laminate flooring. This will have a better foot feel (better elasticity).

But it will reduce the height of the room (just 1 2 cm, not too much).

Absorption with carbon tetrachloride...

Hehe, it's not that professional.

Its practical gasoline can be removed, gasoline and iodine are both non-polar molecules, according to the principle of similarity and solubility, they can be dissolved into each other.

With the improvement of people's living standards, more and more families choose to lay solid wood floors on the ground in the process of home decoration, but the daily cleaning and maintenance of solid wood floors is a headache, so how to quickly and effectively clean and maintain their own solid wood floors?

1. Self-formulated floor detergent is affordable and effective.

In fact, you can also configure some simple detergents to maintain and clean the wooden floor, such as adding 450 grams of soda, soft soap and bleach and 2270 ml of water to a large pot to mix well and boil to half of the original volume, wait for it to cool and then clean the wooden floor with a hard brush.

Second, save time and effort to select refined salt.

Refined salt is very effective for clear egg traces on the board, you can sprinkle some refined salt, wait for about 10 minutes to clean, which not only saves cleaning costs, but also is too time-consuming and laborious!

Third, concentrated alkaline water to remove grease.

For grease stains on the floor, you can boil the aqueous solution of concentrated stone alkali first, cool it and then clean it. Immediately after that, you can sprinkle some hot water and bleach on the stained area and leave it in this condition for an overnight time before washing.

Fourth, the salad oil decontamination and brightening.

Salad oil is one of the items often used in daily life to clean floor stains, in the process of cleaning the floor, only need to add a few drops of salad oil in water, which can not only brighten the wooden floor, but also achieve the purpose of cleaning and staining.

5. Milk with vinegar for maintenance and decontamination.

For some common stains on the floor, you can add some vinegar to the fermented milk, which can not only remove the stains on the floor, but also keep the floor shiny!

Tips for maintaining wooden floors.

Before dealing with the stains on the wooden floor, use a clean broom to clean the dust in the room, then use rice water or a rag dipped in detergent to clean the local area of the stain, and finally use a semi-dry mop to clean a large area.

In order to prevent the growth of bacteria during the use of wooden floors, you can use a vacuum cleaner regularly to clean, remember that it is best to use a vacuum cleaner with a filter function, so that you can clean and thoroughly clean the dust and bacteria on the wooden floor.

There is also a very simple wooden floor maintenance and cleaning tips, wear soft wool cloth slippers during indoor activities, so that you can simply clean the floor during daily walking.

In addition to cleaning the wooden floor, it is also necessary to maintain the wooden floor. For example, solid wood flooring is prone to cracks in the cold winter, which is caused by the loss of water and shrinkage of the floor in winter, and regular solid waxing of solid wood flooring will effectively reduce the frequency of such situations.

This is a copy.

It can be directly connected to the wooden floor on the floor tile, and there is no need to remove the tile and then install the floor, generally the floor tile can be retained during the decoration, and the old floor tile can be used to lay the bottom, and the wooden floor can be laid on it, but the dust on the floor tile needs to be cleaned up, and the floor tile bottom can be used to ensure the smoothness of the indoor ground.

The decoration has been paved with floor tiles, and the original floor tiles can be retained. It is possible to remove the dust from the floor tiles, use the old floor tiles to cover the base, and lay wooden floors on them.

At the same time, the use of the old floor tile bottom, can maintain the flatness of the indoor ground, when laying the wooden floor on the top, it is also relatively easy, omitting to remove the old floor tiles, not only speed up the progress of the project, but also save about 30% of the cost in the floor decoration.

Before paving, see if the floor tiles are loose, if there are loose floor tiles, it is best to let the construction team help fix them. Secondly, it is necessary to measure the flatness to see whether the original floor tiles are laid horizontally, if the original tile leveling is very good, there is no need for leveling.

Other things to note are that there is a drop in the height of the floor between the space with the additional floor and the space without the floor, and the joint should be treated well so as not to affect the appearance. Also, pay attention to the ground clearance of the door.

If you want to say that you can shop at all, you can shop.

Du tile before your floor should have been looking for zhi

flat; Generally, the height of the building is about 2 meters, and the inner wooden floor and floor mat are only 2 centimeters, so you don't have to worry about the floor level being too high.

There is no need to worry too much about heating, which is generally recycled and sustainable. It depends on what kind of wooden floor you choose, mainly because you are afraid of deformation. . . It's best to choose a strengthened one.

Yes, use laminate flooring, but you will increase the height in this way, and the overall coordination will not be very good, but this aspect also depends on the ability of the worker.

It feels like it depends on the height of your home, don't pave the wood, it feels a lot shorter, and the impact on floor heating is very limited and can be ignored.

It is better not to lay it directly, it will affect the use of floor heating, and it is more troublesome to install the floor.

Hello, you can. No problem.

Yes, absolutely, and it will work well.

Yes, it mainly depends on whether your floor tiles are flat or not. If it is uneven, it is better to lay the floor again.

If your home is underfloor heating, it is recommended to smash the floor tiles, which is not good for heating. **Ranging from twenty to thousand. Choose sixty or seventy...