How to go for regular water and electricity decoration, and how to go for new house decoration?

Generally speaking, it is done in a horizontal and vertical or two-point and one-line manner, and a lock needs to be added between the wire pipe and the wire box. In addition, the distance between strong and weak electricity must be controlled at more than 50 centimeters to avoid interference. For water pipes, cold water pipes and hot water pipes should not be located in the same trench, and the distance between them should be controlled to 10 to 15 cm.

No matter how your hydropower is going, we commonly have horizontal and vertical and two-point one-line, these two methods are actually composite construction standards, but horizontal and vertical relative to two-point and one-line, material pipelines and other costs are much more.

When doing hydropower transformation, we must pay attention not to directly insert its wire pipe into the wire box, let alone leave a section outside, and be sure to insert its wire into the wire box, which is actually the most standard! If the wire pipe is inserted into the wire box, this is not conducive to wiring, and if the wire pipe is too short and not inserted into the wire box, the later sealing cement will fix the wire.

If there is no separation between strong and weak current when wiring, you will find that there will be interference in the process of use, and the distance between strong and weak electricity is recommended to be more than 50cm.

Pay attention to the number of threads threaded in the conduit

In the national standard, it should be noted that the wire interface in the line pipe must not be overloaded, can not exceed 40% of the inner interface of the line pipe, in our surrounding decoration of the family, the line pipe is generally divided into 4 points, 6 points, for example, we take the line pipe of 6 points, which can not be more than 5 wires.

There are generally three types of hydropower installation: walking on the top, walking on the ground, and walking on the wall. The circuit goes to the top, which is not easy to be damaged in the later construction, and the construction protection work is easy.

1. Walk the ground. The installation of the pipeline is relatively easy, the materials are less, the construction is relatively simple, and there is no need to manage the after-sales problem, but if there is a water leakage, it is more difficult to find, the maintenance is troublesome, and the loss caused is relatively large, because it will soak to the floor, and it will also destroy the ceiling downstairs and the like.

2. Walk the wall. The pipeline installation is more difficult, the materials are relatively less, the maintenance is relatively simple when there is water leakage, and once the water leaks, it will not cause too much loss, but the slotting is more difficult, and the wall will be damaged, the construction difficulty is also relatively large, and the later maintenance is also more troublesome.

3. Go to the top. The pipeline installation is the most difficult, the materials are also more, if the water leakage occurs, the maintenance is relatively simple, but it is not easy to find the water leakage problem, and it will not cause major losses, but if there is a hall, it is necessary to do the ceiling or gypsum line to block, but after the pipeline becomes longer, the water resistance will increase, which will cause the water flow rate to decrease.

1. Under normal circumstances, follow the copper wire of the socket circuit not less than mm. Air conditioners, water heaters and other high-power electrical appliances with copper wires of not less than 4mm. Flame-retardant sleeves shall be used for wires, and no more than 3 wires shall be used in the same sleeve.

The weak current line shall not be in the same set of pipes as the strong current line, and a certain distance should be kept between the two bushings.

2. In terms of waterways, the water pipes between the kitchen and bathroom should be in the ceiling as much as possible to facilitate future inspections. The place where water needs to be used should be designed during construction to prevent the situation where water is needed but there are no water pipes.

Formal hydropower decoration should be confirmed by the hydropower point, and then the hydropower will go to the top.

1. Confirmation of hydropower points.

For the water and electricity points used in home decoration, in fact, it includes the points reserved for the installation of our tap water. There is also the point reserved for all circuits in the home. Like the point of tap water, it is generally reserved in the kitchen for the vegetable washing basin.

In the bathroom, there are generally reserved water points for toilets, washbasins and shower rooms. There are many points in the rough draft of the circuit, such as sockets, lights, switches, etc. in each room, these are the points we need to confirm.

2. Hydropower goes to the top.

The advantage of going to the top of the waterway is that it can minimize the loss of water leakage. Once there is a leakage of pipes at home, we can also find it as soon as possible and solve it in time. The advantage of the circuit roof is to facilitate future maintenance and wire replacement, the wire is hidden behind the ceiling, maintenance and replacement is easier and convenient, at least without knocking on the tiles.

Precautions for decorating water and electricity

1. Wire color separation.

After the wire is obtained, it needs to be separated first, otherwise it will lead to short circuit or other safety hazards. Among them, blue is the zero line, red is the fire line, and yellow-green is the ground line.

2. Strong and weak wires cannot be laid in the same pipe.

We should also note that strong and weak wires should not be laid in the same pipe, and the laying spacing should be greater than 30cm. If there is a crossing or intersection, you need to wrap tin foil to avoid strong and weak wires from resisting each other in the later stage.

3. Pay attention to the distance between hot and cold water pipes.

Generally, cold and hot water pipes cannot be placed in the same tank at the same time, because the expansion and contraction rates of cold and hot water pipes are different, and it is easy to loosen the hollow drum when put together. The two need to be spaced about 20 centimeters apart. In practice, the outlet of hot and cold water will be operated according to the spacing of 15 cm, and if the spacing exceeds 20 cm, a stool will be added to the welding head.

Summary. 1. Horizontal and vertical. For hydropower wiring, basically the horizontal and vertical wiring method will be adopted, which can not only make the line aesthetically pleasing, but also have little impact on other construction work.

How to go about regular water and electricity decoration.

1. Horizontal and vertical. For hydropower wiring, basically the horizontal and vertical wiring method will be adopted, which can not only make the line aesthetically pleasing, but also have little impact on other construction work.

2. Dotted line. For the staff who are more knowledgeable about electricity, this kind of wiring can save some costs, but it is characterized by more messy and has a greater impact on future maintenance.

3. Hydropower walks the wall. In addition to the ground and two points, there is also a way to walk the wall, this way of wiring is less difficult, although the later maintenance is easier, but the difficulty of the early slotting work is not easy.

Dear, if you are satisfied with the answer, you can give a thumbs up, and I wish you a happy life.

The decoration of water and electricity is topped because the convenience of maintenance and replacement is the biggest advantage.

Generally speaking, the electrician master will suggest the line, go high and not go low, which is their professional safety consideration, if you get closer, you are afraid that there will be water accumulation or wet wires will be damaged into leakage in later life, and electric shock accidents may occur.

Water for water and electricity installation precautions

1. The waterproof layer of the bathroom should not be less than meters.

2. The waterproof project should be done after the construction of the concealed project is completed and accepted.

3. Waterproof construction should be waterproofed with coated film, and two water storage tests should be done after the construction is completed.

4. Floor drain Yudan noise, yin and yang corners, pipelines and other places should be waterproofed for more than one town, and the floor drain should be deodorized floor drain.

5. Try not to walk from the ground to the water pipe, the cold and hot water pipe is hot on the left and cold on the right, and the cold water pipe should have a protective layer of 1cm in the wall, and the hot water pipe is, so the groove should be opened deep.

Generally speaking, if the water and electricity decoration is said to go to the top, it is because the convenience of maintenance and replacement is the biggest advantageIn case of pipeline leakage, you can quickly find the location of the leakage, the kitchen and bathroom can dismantle a few ceilings, replace the broken pipes on the OK, the cost of maintenance is low, this way is basically non-destructive repair method, no need to destroy the floor tiles or wall tiles of the bathroom kitchen, and can avoid water leakage downstairs, to avoid unnecessary neighborhood disputes!

There are also disadvantages to the top of hydropower, and the disadvantage is that the labor cost is more expensive.

If the water pipeline goes to the ground, the advantage is that the cost is low, and the manual cost will be saved, but the disadvantage is that the later maintenance is particularly troublesome, in fact, he did the decoration pipeline in the early years, and once the leakage water flooded downstairs, the problem of water pipe or waterproof is not clear. To repair and find the leakage, you have to spend all the floor tiles and wall tiles. In addition to the trouble, it also invisibly increases the cost!

In addition, if slotted fixed holes are required, the beam may also be damaged, bringing safety hazards.

Generally speaking, the electrician master will suggest the line, go high and not go low, which is their professional safety consideration, if you get closer, you are afraid that there will be water accumulation or wet wires in the later life will be damaged into leakage, and electric shock accidents may occur.

Based on the above circumstances, water and electricity to go to the top is a better choice, the advantages are more obvious, but try to reduce the roof slotting, along the wall and the foot of the top of the walk, through the living room and bedroom water pipes can be suspended, or with a gypsum line to cover the seal, will not affect the appearance. The kitchen has a suspended ceiling, which hides the water pipes well.

Related Notes:

The advantages of going to the top: high safety, time-saving and cost-saving maintenance.

1. The water pipe goes to the top, the water leakage problem is found early, and the safety is slightly higher; In addition, for the bathroom, it is easier to do the waterproofing of the ground when you go to the top.

2. For the kitchen and bathroom to go to the top, the kitchen and bathroom will generally do aluminum gusset ceiling, after the water leakage problem is found in time, it can be repaired in time by removing the ceiling, and the aluminum gusset is not afraid of water, so the maintenance is simple and generally does not incur secondary costs; However, for the ceiling of the living room using gypsum board and gypsum line, it is necessary to smash it and spend money to make the ceiling again. Therefore, it is recommended that the kitchen and bathroom water and electricity should be topped, and the living room can be decided according to their own decoration situation.

3. When going to the top, if the water pipe leaks, it can also be found and repaired in time without affecting the neighbors, so as to avoid disputes.

Disadvantages of going to the top: difficult operation, labor-intensive and costly.

Hydropower to the top, for hydropower workers, is still more difficult, to go to the top to stand on the stool and look up to work, play fixed clips, lintel to punch holes, very troublesome.