How to wipe the moldy and black cabinet off? The cabinet at home is moldy, how to remove it

1. When we find that the cabinet is moldy, the first thing to dry is to wash the moldy place, which can be treated with paper towels and dry brushes at the back. Otherwise, exchange it with a damp rag. In general, it is not recommended to brush your teeth with a wet brush, as it is easy to damage the internal structure of the cabinet wood.

2. When the mold in the cabinet grows to the mold level, not only the surface mold is cleaned, but the purpose is to paint and wax the moldy place, block the air in the moldy place, and prevent it from growing again. It's important to note that mold in cabinets isn't just moisture generation, poor quality paint can also produce mold in cabinets.

3. The mold in the cabinet has grown, but once it is hard, we must solve the problem from the source. The mold in the cabinet is also described above, the humidity in the room is too heavy, and secondly, the items stored inside are dried, which are the main causes of mold in the wardrobe.

4. In daily life, we must pay attention to the surrounding environment of dryness. There are several drying methods. For example, the room where the maintenance is kept is ventilated, activated carbon and dry powder are placed in the cupboard, and activated carbon is placed in the individual.

Because in addition to its drying function, it can also effectively adsorb various microorganisms in the air and keep the inside of the cabinet clean. Of course, what is placed in the cupboard must be left to dry.

Moldy and black, generally can't be detected, you can use vinegar and baking soda to try it and see if you can rub it out?

1. Wipe clean and clean up the moldy area

When you see mold in your closet, clean it up first, wipe it with a dry paper towel or brush it with a dry brush to clean the moldy area. If you can't clean it up, you can wipe it vigorously with a damp cloth, which can often be very convenient to remove mold.

2. Deal with the moldy places

It is necessary to brush the varnish on it again, so that it can effectively prevent further mold. Mold is often caused by paint problems, so it can also be cleaned with petroleum jelly and then wiped clean with a clean cloth.

3. Keep the inside of the wardrobe dry

You can put some desiccant in the wardrobe to absorb the excess water in the wardrobe and make the wardrobe drier. You can put some orange peel in the wardrobe, which can also play a refreshing and environmentally friendly effect, pay attention to the frequent opening of the window for ventilation, and try not to use a humidifier indoors to prevent excessive moisture and affect the use of the wardrobe. Usually pay attention to opening the window after mopping the floor with a wet mop to let the moisture be effectively dried.

Tips to solve moldy cabinets

1. When you find that there is mildew on the cabinet, the first thing is to move the clothes out and wipe the mildew with a rag dipped in soapy water, and the whole process needs to be wiped three times, which can effectively remove the mildew, and baking soda also has the same effect of removing mildew.

2. Then you need to open the door of the wardrobe for ventilation, keep it for 1 2 days, and then brush it with a layer of anti-mildew paint, and then brush it with a layer after drying, which can effectively prevent mildew, and when the smell volatilizes, you can put the clothes in.

3. In order to avoid the cabinet from becoming moldy or mildew again, you can place several absorbent bags in the cabinet and hang them directly on the shelf, which can absorb the moisture in the cabinet, maintain a dry environment, and avoid mildew breeding.

4. The air is humid and easy to mold, you can put some quicklime at home, which can not only effectively prevent moisture, but also have the effect of disinfection. If there is too much moisture in the wardrobe, put a tungsten light bulb in the wardrobe and turn it on when it is wet can effectively reduce the moisture in the wardrobe and keep the wardrobe dry.

What should I do if the cabinet at home is moldy? It is recommended that you pay attention to the dryness of the ground, expose the cabinet to the sun first, remove the mildew, buy some desiccant and put it in the cabinet, and dry the clothes in the cabinet. Wrap quicklime in gauze into small packets of 50 100 grams and put them in all corners of the wardrobe and drawers, and leave them for a month to remove mold (quicklime is available on construction sites, ask for a little from the people on the construction site).

Or buy two boxes of 600 grams of activated carbon, 12 small packets per box, two boxes of 24 packs are enough, respectively, put in each corner of the wardrobe activated carbon can be placed for a few more months, activated carbon can kill viruses and remove mildew. But it's a bit slower than quicklime to remove mold. Whether you use quicklime or activated charcoal, open the cabinet door.

Yes Put some fruit in the cabinet, pineapple, orange peel and other fruits are breathable like plants, they are easy to absorb this substance, so cut pineapple, orange peel, onion, etc. inside and outside the cabinet, you can go to the formaldehyde inside and outside the cabinet. This is a good way to remove formaldehyde.

It should be that the home is too damp, you can use Meiboss mold remover, spray the mold and it will be gone.

Take it out and dry it, and use a brush to brush it.

1. If the mold of the cabinet is not very serious, you can place some desiccant and mothballs in the cabinet for water absorption and insect control, and then wipe off the mold with a cloth, and finally repaint.

2. If the mold of the cabinet is serious, you can use sandpaper to remove the mold first, and then clean it with detergent, wait until it is dry, then spray it with antifungal agent, and finally repaint it.

3. If it is due to mildew caused by long-term exposure to humidity and humidity, then it should be ventilated frequently during daily use to keep the environment dry. The cabinet can also be moved to avoid being exposed to a dark and damp environment for long periods of time, and it can also be dried regularly.

1. Bad paint: It may be because the quality of the paint is not good enough during processing, or the number of times the paint is applied or the construction technology is not in place.

2. Dry treatment: It may be because before processing, the treatment of the material is not in place, so that the moisture content of the wood is relatively high, and the later stage has not been dried by the style, so the skin will be moldy for a long time.

3. Dark and damp environment: It may be because the cabinet has been in a dark and damp environment for a long time, so there are many molds breeding, which leads to the moldy situation of the cabinet caused by reed skin.

4. Failure to clean: It may be due to the fact that there are food residues or mouse corpses in the cabinet, which have not been found for a long time or have not been cleaned and dried for a long time.

5. Not paying attention to drying: If it is a shoe cabinet, it may be because the water vapor in the shoes is absorbed by the shoe cabinet, and the cabinet is moldy due to not paying attention to drying.

Wardrobes, cabinets with moldy have different treatments:

For wardrobe mold:

The main reason for the mold of the wardrobe is that the wardrobe is more damp, by looking at the spots on the wardrobe can be well determined whether the wardrobe has begun to mold, if this phenomenon occurs, first of all, we should first take out all the clothes in the wardrobe, and then open all the doors and windows of the wardrobe door and the bedroom door in the position to maintain a good ventilation effect, which is conducive to the discharge of moisture and makes the wardrobe dry.

At the same time, another reason for the mold of the wardrobe is that the wall behind the wardrobe is damp, and the moisture is transferred to the wardrobe through the material of the wardrobe, so that the accumulated moisture cannot be diffused, resulting in mold in the wardrobe. When this phenomenon occurs, we can put something on the wardrobe that is conducive to removing moisture to prevent the wardrobe from getting damp and moldy.

For moldy cabinets:

If there is a moldy noise leak in the cabinet, first of all, we should open the kitchen doors and windows, a good ventilation environment is conducive to keeping the kitchen dry.

If you can, you can also place some small items in the cupboard to remove moisture, such as desiccant, etc.; Use the water absorption function of the desiccant to absorb the moisture in the cabinet or repeat it until the cabinet is dry. Or you can also stick some moisture-proof materials directly in the cabinet to prevent it.

1. Use a rag stained with detergent to wipe the mildew spots, and secondly, open the doors and windows of the wardrobe for 24 hours. After drying, brush a layer of anti-mold agent on top to prevent mold. Then put the laundry and a few absorbent bags in to ensure that the air inside is dry and free of any mold.

2. Remove the mildew, usually with a dry paper towel. If the brush is not clean, you can wipe it vigorously with a damp cloth, which can be easily removed.

3. If mold is found, re-brush the varnish to avoid mildew. Moldiness is mainly due to paint problems, so we can also wipe with a clean cloth after cleaning the rainforest.