The Meizu MX5 mobile phone earpiece is out of sound, and it will be fine again after a while, what s

When the handset is silent when the mobile phone is used, you can try the following methods:

3. Please dial to cross-test the sound of the mobile phone earpiece, external amplifier and when connected to the earphone

4. If there is no sound when using the amplifier or earphones, please back up the data and update the mobile phone to the latest system.

5. If only the earpiece is silent, it is recommended that you back up your data, exit Flyme, and send your phone for repair and testing.

Meizu mobile phone repair channels:

If you have not purchased an accidental broken screensaver, you can send your phone for repair through the following channels.

1.Stay at home Meizu door-to-door mail quick repair.

Meizu repair center intimate service.

3.Meizu store for repair.

4.The way to send the machine for repair on JD.com.

If possible, you need to bring a valid proof of purchase, warranty card and invoice (receipt) with you for repair

In view of the current situation of your mobile phone, it is recommended that you try to deal with it in the following ways:

1. Restart your phone and try to see if it appears.

3. Upgrade your phone to the latest version to optimize the phone system.

Enter the "Settings" interface, click "Sound > Volume", and check whether the volume is turned up to higher in all modes. Restart your phone and try. Check that the speakers are covered. Replace** to confirm whether there is a problem with the audio source.

The Meizu mobile phone suddenly had no sound, cleaned up the speaker dust and welded the motherboard interface, this trick was done.

The mobile phone is divided into two sound generating units, external amplifier and earpiece,What you mean by no sound refers to the external amplifier or earpiece,If the earpiece has no sound, you can try to use hands-free,If there is no sound outside, you can plug in the headphones to try,This can determine where there is a problem,In addition, the Meizu mobile phone has a problem that the volume keys are not easy to use,The volume will automatically turn on to the maximum or minimum,It seems that it is still a problem with the motherboard,You see which situation yours is。

1. Exit silent mode and press the volume key to increase the volume.

2. Restart your phone or plug in and unplug the earphones.

3. Disable third-party optimization software, scenario mode, power-saving software, etc.

4. Reflash the firmware and clear the data.

5. If none of the above can be solved, please bring your mobile phone and warranty card to the local Meizu certification store for after-sales consultation, and return to the factory for maintenance if necessary.

Summary. What's going on with the sudden sound of the Meizu mobile phone, the most common is that the volume is not turned on, and the mobile phone is adjusted to vibrate. Many people often forget to modify it after setting it to vibrate, and the mobile phone is placed on the pillow, and the sound is very small when it vibrates, resulting in no hearing.

I do this. The speaker of the mobile phone is broken, and in this case, you need to take it to a mobile phone repair shop for repair. Generally speaking, it is best to return to the factory for maintenance, and do not repair it in a small shop to prevent the other party from replacing parts.

There is a software glitch on the phone, and the audio driver is damaged. In a similar situation, you can try yourself from the official **** driver of the phone in question. Of course, if it can't be solved, then it needs to be returned to the factory for repair.

The sound of many Android phones is separated, such as multi**, playing games, etc., here it depends on what the specific situation is, such as multi** There is no sound, as long as the multi** is adjusted to the maximum. There is no sound when you hit **, which leads to this situation is generally a problem of flashing, and there is no flashing into the radio. This is easy to solve, relatively simple, just re-brush it in.

Excuse me. What's going on with the sudden sound of the Meizu mobile phone, the most common is that the volume is not turned on, and the mobile phone is adjusted to vibrate. Many people often forget to modify it after setting it to vibrate, and the mobile phone is placed on the pillow, and the sound is very small when it vibrates, resulting in no hearing.

I do this. The speaker of the mobile phone is broken, and in this case, you need to take it to a mobile phone repair shop for repair. Generally speaking, it is best to return to the factory for maintenance, and do not repair it in a small shop to prevent the other party from replacing parts.

There is a software glitch on the phone, and the audio driver is damaged. In a similar situation, you can try yourself from the official **** driver of the phone in question. Of course, if it can't be solved, then it needs to be returned to the factory for repair.

The sound of many Android phones is separated, such as multi**, playing games, etc., here it depends on what the specific situation is, such as multi** There is no sound, as long as the multi** is adjusted to the maximum. There is no sound when you hit **, which leads to this situation is generally a problem of flashing, and there is no flashing into the radio. This is easy to solve, relatively simple, just re-brush it in.

Reasons and solutions for the low sound of the Meizu MX earpiece:

1. Check whether the mesh at the earpiece is blocked by foreign objects, if it is blocked, solution: use a clean cotton swab to wipe it clean to repair;

2. Third-party software or system will also cause "single pass", solution: switch back and forth "hands-free" function to observe whether the fault is eliminated, and software or system problems can be upgraded to the latest system repair;

3. If the "hands-free" function of the mobile phone and the sound of the earphones are normal, but the sound of the earpiece is small, it may be a fault caused by poor contact or damage of the earpiece.

It is recommended to insert the headphones first to check whether the sound is heard normally, if it is normal, it is recommended to go to the after-sales maintenance center to test the after-sales, and you can check the detailed location and contact of the maintenance center across the country on the Meizu official website - Service - Service Center**.

If the mobile phone enters the wrong lock screen password for many times in a row, the flyme account will be locked, and the user should be careful not to turn on the screen and put it in the pocket during use, which will cause it to be accidentally touched.

It is recommended that users reflash the firmware of the mobile phone or flash other versions of the firmware, check the box to erase data, and pay attention to back up the data in advance to avoid data loss.

Reboot to see, if it doesn't work, restore factory value:

Start syncing and back up your important apps first, and then restore your apps after restoring them to factory values.

Open Settings--- About Phone ---Storage--- Clear Data (Factory Restore), double check, start clearing, and the phone will be restored when it restarts.

Hello, the connection method is the same as that of ordinary Bluetooth earphones, first turn on the pairing search mode of Bluetooth earphones, the common method of turning on the earphones is to press and hold the power button of Bluetooth earphones until the red and blue lights flash alternately (first the red light is on, don't let go and continue to press the power button will appear red and blue lights flashing alternately) and then release it, at this time the earphones can be searched, and then the mobile phone searches for the pairing and connection of the earphones. If you want to use it to listen to songs, you need to use stereo Bluetooth headphones.

Hope it helps, thank you.

Hello, hello, it is generally a problem of memory and system compatibility, it is recommended that you clean up the phone cache, clear the background program, and then shut down and restart it to try, if it is not easy to use, it is recommended that you reflash the firmware or brush other versions of the firmware, it is best to choose Shuangqing.

If there is no response after pressing the power button, you can try to connect the charger to charge for 30 minutes before turning on to see if there is any improvement. If the machine still can't be turned on after following the above steps, or the machine is stuck on the M page and cannot enter the system, it is recommended that you can operate according to the following methods: 1. After connecting to the computer, press and hold the power button for about 7 seconds to force the shutdown; 2. Press and hold the volume up button + power button for 7 15 seconds to enter the flashing interface and connect to the computer; Put in the latest firmware; 3. At the same time, check Clear Data and Update.

Note: The operation of clearing data at the same time will erase personal information such as contacts, SMS, notes, etc., and it is necessary to back up with flyme in advance to avoid data loss.

Here's how to give it a try:

1. Restart your phone and see if the problem is solved;

2. Re-flash the current firmware or upgrade to the latest version of the firmware system (it is recommended to clear the data).

Normal. Playing games is hotter.

Hello, click to enter: Settings --- application management - find the flyme desktop in all, click to enter, and then click to clear the data to retrieve, (this function will disrupt the layout of your current desktop icon, you need to re-typeset, will not lose other files.) ）

Follow these steps to troubleshoot the cause.

1. Select other tracks and adjust the volume of the music chain.

4. Reflash the system or clear the data (user information is backed up by flyme).

5. Go to the local Meizu certification store for after-sales consultation.

Founded in March 2003, Meizu is a well-known smartphone manufacturer in China, headquartered in Zhuhai, Guangdong Province, China.

The company mainly produces first-class walkmans and mobile phones, and currently has three series of mobile phone products under the high-end brand of "Meizu Pro", "Meizu MX" mid-range models and "Meizu Blue" sub-brand, as well as the Flyme system. [1] The company has nearly 2,500 stores across the country, and its products are sold in Chinese mainland, Hong Kong, Russia, France, Ukraine, Israel and other countries and regions. Hand teasing.

In October 2014, the company announced a strategic alliance with Alibaba. In February 2015, it received an investment of 100 million US dollars from Alibaba. On May 10, 2017, Meizu was shortlisted for the "CCTV China Brand List".

It is possible that the system is damaged, it is recommended that you flash the machine.

1.Let the phone enter the flash mode first, there are two ways to enter the flash mode, one is to enter the system in the state of boot to complete! But we forgot our phone password lock!

So this method doesn't work, that's the second method! That is, in the state of turning off the sail and destroying it, press and hold the "power button" + "volume +" button at the same time for about 3 seconds, and you can let go to enter the recovery flash mode interface.

2.When entering the flash mode interface, select Chinese Simplified mode (use the volume button to select up and down, use the power button to confirm, there is a prompt at the bottom of the interface).

3.Enter the Chinese mode and press the volume down button to move to the second item "Clear Data", and press the power button to confirm. Enter the Clear Data interface.

4.In the Clear Data interface, press the volume down button to move to the "Clear User Data" selection option, and press the power button to confirm. A prompt will come out saying that you are sure to clear the user data, and this operation cannot be restored to the cloud.

Select Confirm. In a few seconds or so, the user data will be cleared. At this point, we will return to the main menu interface, and we can restart the phone.

1. When there is no sound outside, check whether there is a headphone icon in the status bar of the mobile phone.

2. Check whether the volume is turned to the lowest.

3. If there is sound when plugged in the earphones, but there is no sound outside, it is hardware damage, you need to contact Meizu customer service and go to the local after-sales service for inspection and repair.

4. Back up the contents of the phone, reply to the factory blocking settings, and try to see if there is an external sound.

5. If the earphones are not plugged in, there is a headset icon in the status bar, you can try to plug in and unplug the earphones many times to return to normal.