My family lives on the top floor, how should I do roof waterproofing?

Buying a home is now a difficult thing in this day and age. It's a good thing to own a house in the city. It can really be said that it is a blessing, and of course, the purchase order is also gradually introduced in the city. It's getting harder and harder to buy a house!

Buying a house and buying a ground floor? Don't worry, spread the "movie" directly to the "waterproof" issue!

Just bought a room two days before Flowers. It is a top floor and floor. Although it is relatively wide, the sun is relatively unfair, but the waterproofing of the building is really a big problem. Waterproofing should be good and the house will suffer.

After that, the flower will know a movie that can be specially laid on the roof. Although the film looks thin, the waterproofing effect is a good effect, and it is also a convenient construction.

The name of the film is called Waterproof and Breathable Membrane. Most of the flow flow today is asphalt and polymer waterproofing. This movie is the latter, so even if it rains heavily, there will be no water leaks.

Of course, before laying, it is better to make a layer of insulation to the roof, which is beneficial to prevent the flow of temperature.

In addition, this waterproofing membrane is also very convenient and can be done by two or three workers, because the membrane has a strong shape and hardly remains on the roof of the building.

Everyone knows that when the house is for a long time, there will be dampness, which also has good breathability, which can effectively drain the excess moisture from the house. The house will be more refreshing after the house, which will also reduce the reproduction of bacteria. It seems that there is really a lot of stuff in this movie.

At the top of the building, friends have a separate relaxing environment, equivalent to a small garden, which can raise the green flowers you like, of course, I can buy a couple of deck chairs and friends. Chatting, drinking tea, and thinking about it is a particularly pleasant thing to do.

If you want to grow flowers and vegetables on top of the building, it is better to choose a relatively cheerful and arid content, such as roses and fairy balls. Planting them on top of the roof is a good option, which will not only beautify the environment. It can provide a good growth environment for plants.

You should get some color steel tiles, because some color steel tiles are waterproof, and they are particularly convenient and healthy, and they will not hurt others.

The roof of the waterproof first find out whether there is water leakage, find out the cause, fill the gap with leakage paste, and then paint twice with water-based waterproof paint or transparent waterproof material on the wall.

You can buy asphalt waterproofing membranes, synthetic polymer waterproofing membranes and solvent-based rubber asphalt waterproofing coatings. Step base cleaning, leveling, coating coil binder or direct waterproof coating, waterproof layer protection layer construction.

This should require a special material or cement that can be reinforced, or a layer of linoleum waterproof.

You should choose some waterproof materials to make the roof, and you can also lay the corresponding plastic film on the roof.

First of all, you must go to the roof to check whether there is any water leakage, and the roof should also be waterproofed, and the whole house should be painted with waterproof paint.

When decorating your own home, you should first paint some waterproof materials on the roof, and then do some cleaning on the roof, and then repair the leakage on the surface.

First of all, the waterproofing of the roof should be strengthened, and some waterproof equipment should also be set up in the process, so that a series of roof leaks can be well avoided.

Nowadays, for the house, some people may choose to buy a house, and some people will prefer to build a house, and either way, in the decoration process of the house, there are many things that need to be paid attention to, such as in the process of waterproofing the roof, if it is not handled properly, there are often many problems that may occur in the later stage, such as dripping or even leaking in the house. Today, I will mainly introduce to you the treatment process of waterproofing the roof of the roof and waterproofing, hoping to help you.

1. Construction environment

In order to effectively ensure the smooth progress of the construction operation and the quality of the membrane paving, the roof should be waterproofed on a sunny day, and the construction temperature should be kept at +50C +350C, because the relevant polymer modified asphalt and polymer waterproofing membrane should not be constructed below negative temperature, and the hot-melt paving membrane can be constructed under the temperature of -100C or above, and this low-temperature resistant membrane is very suitable for use at negative temperature. Avoid open-air operations in excessive atmospheric humidity and windy weather, otherwise corresponding technical treatment measures should be taken.

2. Preparation

Before the roof waterproofing construction, the construction unit shall organize relevant technical personnel to review the roof engineering drawings, master the detailed structure and relevant technical requirements in the construction drawings, and prepare the construction plan or technical measures of the roof project according to the actual situation of the project. In this way, it is avoided to leave defects after construction, resulting in rework, and at the same time, the project is planned to disturb the construction of the bench according to the construction organization, so as to prevent omission, confusion and reversal in the work process from affecting the quality of the project, thereby bringing unnecessary losses.

3. Material quality

The quality of waterproof materials directly affects the quality of waterproofing projects, so it is particularly important to choose suitable and qualified waterproof materials when carrying out roof waterproofing treatment. The quality of the waterproof material must meet the provisions of the relevant standards, and be inspected and certified by the quality inspection department, and the appearance of the waterproof layer of the membrane should be smooth and straight, without twisting and wrinkles.

4. Protective layer setting

The setting of the protective layer should comply with the provisions of this process, and an isolation layer should be set between the rigid protective layer and the waterproof layer. The setting of lattice joints on the surface of the protective layer should meet the national standards and design requirements. The protective layer of the block should be paved smoothly, evenly and tightly, and the lattice joints should be left correctly.

In the process of waterproofing the roof, the construction personnel should pay considerable attention, whether it is the relevant preparation work or the process of operation, the waterproofing measures should be in place in one step, not so-so. Because the waterproofing of the roof is often closely related to the whole house, whether the operation is appropriate or not will generally affect the service life of the house, and it also has a great relationship with family life. As for the specific operation process of waterproofing the roof, there is a specific introduction above, you may wish to learn it, which is also helpful to increase our decoration knowledge.

You can get it for free

1. Deal with appearance.

Before the roof is waterproofed, the ground needs to be leveled with cement mortar, and then the roof is waterproofed, so that there will be no leakage due to thinness. After the ground is cleaned, use polyurethane wild high waterproof paint to brush 2-3 times, so that there is a good waterproof effect and it is not easy to leak.

2. Coat the base treatment agent.

The base treatment agent is diluted by adding neoprene asphalt adhesive to gasoline, which must be stirred evenly, and then evenly applied to the surface of the base layer with a large roller brush.

3. Paving the coil.

1) The number of layers and thickness of the coil should meet the requirements of the design. If you need to lay more, remember to stagger the seams. Cut the modified asphalt waterproofing membrane to the appropriate size of the song ruler and grind it slowly, and use a flame spray gun to heat the base layer and connect it with the membrane while laying the membrane while laying it.

2) The coil should be parallel to the ridge, and then paved from the cornice to the top, the two-way flow slope membrane lap should follow the direction of the flowing water, the lap width of the long side and the end is 80, and the end stubble should be staggered by 50.

3. The membrane of the plane paving should be connected with the façade, so that the membrane is close to the yin and yang corners, and the membrane cannot be pulled too tightly.

4. Hot melt edge banding.

How to do roof waterproofing, heat the membrane connection with a spray gun, and then firmly connect it together, and the end needs to be filled tightly with sealing paste.

5. Water storage test of water layer.

After the membrane waterproof layer is done, confirm whether the style is required, and then irrigate, the water surface should be about 20 mm higher than the highest part of the roof, and then observe after 24 hours, if it will not leak, it is qualified, do not rework.