What should I do if the top floor leaks, the spire room, I don t know why it still leaks?

The rain leakage on the top floor should not be done well in the leakage prevention of the house, so there is a rain leakage phenomenon in the spire house, and it is necessary to re-lay the leak-proof equipment and re-do the leak-proof infrastructure.

Leaking rain on the top floor? And it's a spire, that is, because the iron sheet has rotted somewhere, or the nail is soaked in water, and the roof of the building? Basically, the iron roof is fixed with iron nails, so check it, it is best to go to the top of the building, you can put a room of iron sheets on the mat, and the part of the iron nails leaks rain and penetrates?

Just use a layer of tin padding.

If the roof is leaking, then you can find someone to re-roof for you, do a waterproof treatment, if the pancake room is leaking, it is generally unlikely, unless the protective layer of your roof is not good. In this case, it is possible to have such an outcome.

At this time, you can find a property in the community, and then they will help you repair the leaky part of the roof, although this will also happen in the appraisal house.

If it rains evenly, it will rain for a long time, and this kind of rain leakage will easily occur. In this way, you can find his leaks, and then type some structured trading stuff.

The top floor is leaking because the upper tile is broken, and it is recommended that you find the property to help you repair it.

What should I do if the top floor leaks? Firm prevention may be a quality problem. Should look for repairs. Professionals or looking for property.

What should I do if the roof leaks? I don't know why the spire house is still leaking, and I think that if a house like this leaks, it may have a lot to do with the quality, and I think you can ask a professional to help you repair it.

What should I do if the top floor leaks? First of all, I don't know why the top room is still leaking, you can find the property, and the property will be handled for you.

In such a situation, it is best to find a professional to repair it, because ordinary people can't see it and can't find it.

The method of completely solving the water leakage on the top floor is as follows:

1. Find the developer for maintenance during the warranty period: If the purchased commercial house is still within the warranty period, then the roof leaks, you can find the developer to repair it for free, and the warranty period of the waterproof layer on the roof is 5 years, as long as it is within the warranty period, the developer is responsible for repair. However, if the warranty period of the house is approaching, the developer must be urged to deal with it as soon as possible, so as not to delay the house beyond the warranty period by the developer, and eventually have to bear the maintenance costs by themselves.

2. Check the leakage area: If the house has passed the shelf life, then the owner needs to deal with the leakage problem by himself. So the first step is to check the leakage in the house first, to see how big the leakage is, if it is a small gap, then you can directly use cement to seal the fine joint, after filling the joint, and then brush a layer of cement ash on it.

If the water leakage area is relatively large, then cement may not be suitable, and other methods should be chosen.

3. Asphalt treatment: Generally, the water leakage is not particularly serious, in addition to cement, asphalt can also be used to deal with asphalt. When operating, it is necessary to remove about 3 cm from the leakage part of the roof, clean it up, and then plug it with asphalt.

Generally speaking, this method is relatively simple to construct, and it is not expensive, and it is still possible to choose this method with a small leakage area.

4. Re-do the waterproof layer: we also said that cement and asphalt can only repair the small part of the gap, if the roof leakage is serious, it means that the waterproof layer has been destroyed, cement and asphalt can no longer work, in this case, we can only re-do the waterproof layer, so as to fundamentally solve the problem. If you find that the waterproofing layer of the roof has cracked or bulged, it means that the waterproofing layer cannot be repaired and needs to be replaced in time.

Not necessarily, now the waterproof technology is very mature, and most of the top floors of the houses constructed by regular companies will not leak, but it cannot be guaranteed after the 15-year shelf life of the waterproof layer.

Rain leakage on the top floor of the building is a situation that often occurs, although there may not be rain leakage, but the possibility of occurrence is relatively large, usually to do a good job of prevention, to avoid heavy objects or sharp objects into the roof of the top floor, to prevent them from causing damage to the waterproof layer, but also to do a good job in the maintenance and maintenance of the waterproof layer, so as to avoid the occurrence of rain leakage on the top floor.

1. Frequent rain leakage on the top floor of the building

Although the top floor of the building does not necessarily have rain leakage, but this situation does exist, every year there are some top floor residents because of the building leakage and trouble, there are many reasons for this situation, it may be the quality of the house, the waterproof material is not up to standard, the waterproof quality is not qualified, or someone enters the top floor, destroys the waterproof layer of the roof, resulting in the rain leakage of the roof.

Second, the waterproof layer on the roof should be protected

If you want to avoid the occurrence of rain leakage on the top floor of the building, you must pay attention to the protection of the waterproof layer on the roof, especially the residents living on the top floor should pay attention to who is on the roof or what happened on the roof at any time, if there are overweight or sharp items into the roof, you must stop it in time, because they will affect the waterproof layer of the roof when they work on the roof, and it is easy to damage the waterproof layer.

3. Do waterproofing in time

After the house is completed, the roof has been waterproofed with waterproof materials and qualified construction, which can keep the waterproofing of the roof for more than 15 years, and there is no need to repair during this period, but some construction units are unqualified or use inferior waterproof materials, which can only ensure that there is no leakage for four or five years, so after moving into the top floor, we should pay attention to the waterproofing of the top floor of the house in time, and repair and repair the leakage in time when there is a waterproof problem, especially before entering the rainy season, the waterproofing of the roof should be checked in detail. Repair the problem in time after it is found.

The top floor of the building does not necessarily leak rain, because the top floor of the building will be laid with waterproof materials, which can prevent rainwater from penetrating, but the waterproof layer of poor quality may leak, and you need to pay attention to this problem when buying a house.

Not necessarily, if you want to avoid this problem, you need to do a good job of waterproofing and ask professionals to build it.

Yes, there will definitely be such a situation, and when decorating, there should be a particularly good foreshadowing. The bricks on the roof should be checked at all times.

It will definitely appear. Cover it with a leak-proof layer and inspect the house every once in a while so you can avoid it.

If possible, you should take measures to prevent rain leakage in advance, observe the maintenance of the top floor of the building, and take measures to prevent rain leakage in advance.

Roof leakage repair is mainly a problem of drying treatment, and it is not good to repair it if it is not solved well. From the perspective of old roof maintenance, most of them are repaired because of water leakage and water seepage. Therefore, the surface of the roof is dry.

Although the surface has been dried and can be constructed, if it is not dry, during the use of the roof after construction, due to the presence of moisture or moisture in the roof, due to the phenomenon of capillaries, the moisture quickly reaches the middle of the outer surface of the roof and the rainproof layer. Because the rainproof membrane has no air permeability, the moisture expands rapidly between the roof and the rainproof layer, so that the waterproof layer and the layer layer are peeled off, and the waterproof effect cannot be played.

After mastering this key problem, you will find the leakage, remove the original waterproof layer as much as possible, dry it thoroughly, and then choose a good waterproof material to re-do the waterproof layer. The size of the shovel depends on whether the joints of the new and old waterproof layers are easy to handle. Because the joint is not handled well, it is easy to leak.

In order to do a good job of drying, the construction of the waterproof layer should be dried in the sun on a hot day as much as possible.

First of all, you need to find the leakage, a small area can be waterproofed with epoxy resin to water the cracks, and a large area can be waterproofed with asphalt waterproofing membrane.

The water on the top floor of the building is really a big problem, and many people have changed houses for this.

Generally, the roof is sloped and tiled, and the flat roof will leak for a long time, even if it is re-paved with asphalt and plastic, it will crack and leak soon.

Experience 1: My house used to be flat-roofed, but it was changed to tiling a few years ago, and the effect is very good.

Experience 2: The roof of the building is covered with a layer of iron sheet, just like that kind of temporary house.

Experience 3: Frequently pave asphalt, go to the roof to check for water leakage, and repair it with plastic, asphalt and other materials, which is a temporary method (really not a good method).

Lesson 4: Do a good job of roof drainage, minimize the accumulation of water on the roof, and make the roof convex.

We are all old houses...

If there is still leakage on the top floor after waterproofing, it may not be a problem in your home. It is possible that someone else's location leaked and then escaped to your home through the insulation. I don't know if you are allowed to burn asphalt in that area, if it is allowed to give you a suggestion:

1. First of all, the entire roof insulation of the location of your house is lifted, including the insulation layer, so that the entire floor slab is exposed;

2. Then according to the position of the wall of your house and the neighbors on both sides of the adjacent house, build two walls close to the floor slab, and the height of the wall should be higher than (protruding) the entire roof;

3. First of all, make these two walls waterproof to block the leakage of water from the neighbor's house and then pass to your house;

4. Backfill the insulation material of the floor and smooth the roof with cement;

5. Redo the waterproofing, including the location of the destroyed neighbor's house.

This is a complete solution to the leakage on the roof, but the amount of work is somewhat large. But if you do this, the leakage problem on the roof will be completely solved. Even if there is a leak in the future, you can repair the damage and leakage on the roof of your own building, and you don't have to worry about the leakage of other people's houses coming to your house.

1. First of all, it is necessary to determine the exact location of the roof leakage, if it is a leakage, it is best to find the point of the leakage of the exterior wall.

2. Go online and buy a plugging king set.

3. Find the leakage point of the exterior wall, evenly apply the transparent waterproof coating to the surface, and it is best to look at the weather forecast before applying, because it takes about three days to dry.

4. After drying, spread a layer of non-woven fabric on it, evenly coat the black leakage filling material on the non-woven fabric, and wait for drying.

5. If you can't find the leakage point, paste the whole surface with a high-strength plastic plate with leakage-proof cement, which can also be effectively waterproof.

(1) For commercial housing, the warranty period of the waterproof layer on the roof is 5 years, therefore, if the top floor of the purchased real estate leaks during the waterproof warranty period, it is the responsibility of the developer, and the developer has the obligation to repair it free of charge, and must contact the developer as soon as possible to require them to repair it immediately to prevent the developer from delaying beyond the warranty period and causing them to bear the maintenance costs.

2) If it is a welfare house or a self-built house with property rights owned by the unit, and there is a water leak, find the logistics department of the unit or the department responsible for housing management and welfare to apply for maintenance; Some units are inefficient, and if they can't wait for logistical maintenance, they can apply to the logistical department for their own advance funds to hire someone to repair it, and then go through the formalities to reimburse it at the logistics department, while the logistics department will go to the unit's financial department for reimbursement.

3) If the roof leaks during the warranty period, and the developer does not fulfill its obligations, then go to the Consumer Association, the housing and construction department and the quality supervision department to complain.

4) For commercial housing, if the roof leaks due to man-made damage, even within the warranty period, the developer is not obliged to give free repairs, even if they are willing to pay, the developer often will not give maintenance. In such a case, the only way to find a vandal to provide maintenance services, or to provide maintenance by the property and let the vandal bear the maintenance costs, the specific maintenance labor and costs can be decided with the vandal, if the other party refuses to compensate for the loss, go to the judicial route. If the vandals are not found, only the owners of the entire building will have to share the cost of repairs.

Causes of water leakage on the top floor.

1) The house is old, the house has been lived in for a long time and there are no maintenance and maintenance measures, and the waterproof material of the roof layer of the house is aging and damaged, then the house leakage is also a normal reason.

2) There are a lot of plants planted on the top floor of some houses, which actually has a certain impact on the waterproof materials of the house.

3) It is not normal for builders to cut corners and use inferior waterproof materials, so that the house does not leak, but with the strictness of the national construction quality supervision department, this situation is becoming less and less.

First of all, you have to find out the cause of the water leak.

Check it yourself to see if it's a leak in the wall or a leak in the ceiling.

If the wall is leaking, there is now a transparent waterproof coating for the exterior wall, which can be brushed directly on the exterior wall, which is more convenient.

If it's a leak in the ceiling, it's more troublesome, and you may have to find a property to help you look at it.

Can you add a little more detail, like the living environment.

It is better to make a waterproof protective layer on the roof, and it is better to use polymer self-adhesive membrane, which can achieve full adhesion, and there is no problem in planting roofs.

Brush the surface and pour cement slurry.

or Evergreen.