How to deal with water seepage in the toilet and what to do if the toilet is leaking

1. The connections of the drain valve are not tightly sealed. Due to the poor sealing of the joint, the water of the non-disposable formed drain valve flows into the toilet through the overflow pipe from the interface gap under the action of water pressure, resulting in water leakage. Lift-type inlet valves, which can be freely changed in height, often leak if the sealing ring does not fit tightly with the pipe wall.

2. Check whether the flush switch is reset. The plastic flush switch of some toilets will occasionally get stuck after being worn for a long time and cannot be restored. Generally, the switch can be reset by repeating it several times. Check whether the rubber gasket of the drain port under the ball valve is aged and the seal is not tight, and the problem needs to be replaced.

3. Check whether the connection between the spherical float of the water tank and the water inlet switch is loose, whether the float is in place and the switch is not closed, resulting in the water inlet does not stop, and the water flows out of the upright drain pipe after the water is full, as long as the connection between the float and the water valve switch is tightened. If the rubber ball valve is damaged, the seal is not tight, and there is a water leak, it needs to be replaced immediately.

4. Water tank leakage, basically a problem of the drain valve, check the situation of the rubber plug at the outlet of the water tank, if the rubber plug at the outlet is damaged or blocked by foreign objects, the rubber plug is not tightly blocked, and it will also cause the toilet to flow more than once. If the water supply pipe in the tank is not placed correctly, it will also affect it to a greater or lesser extent.

The leakage of the water inlet pipe needs to be reinstalled, the leakage around the toilet can be closed with glass glue slightly, and the heavy one needs to be disassembled and reinstalled.

What to do if the toilet leaks! Hello, I am glad to answer for you <> The solutions to the leakage of the toilet are as follows:1

If there is a leak from the bottom of the toilet, then it means that there is no fixed and anti-spill silver Pellan tray installed, then it is necessary to remove the sealant from the bottom of the toilet bowl and the floor, and then install the flange. 2.If the water tank is leaking, it is usually due to the aging of the internal parts on the toilet tank or the cracked toilet.

We can take the toilet tank apart and inspect it, and replace it in time if we find that the parts are damaged. 3.If you find that the dirt is flowing backwards, it may be that there is a problem with the drain, at this time we can check whether the drain pipe is unobstructed, if you find that it is not unobstructed, you need to contact the seller to check and solve it.

4,。If there is water seepage on the surface of the toilet, it is possible that there is a crack in the toilet itself. The detection method is simple:

Simply drain the water from the toilet tank, add red ink or blue ink to the residual tank, and observe where the water seeps. In this case, it is not recommended to repair the toilet, and replacing the toilet is the only way. Hope mine can help you <>

Do you have any other questions?

When water seeps from the bottom of the toilet, you can use the pull-burst bolt fixing method to solve the problem: place the toilet in the installation position, draw the outline of the toilet base on the ground, and draw the location of the bolt holes in the mounting holes.

Toilet removal begins by unscrewing the connecting tube between the toilet and the wall. Then use a blade to remove the white sealant from the bottom of the toilet that is in contact with the ground, and then remove the toilet.

When installing, first clean the area around the toilet eye, and there should be no sewage. Align the eye of the toilet with the toilet hole on the floor and lay it flat, then lift the toilet left and right, apply a circle of glue to the inside of the toilet, then apply glue to the outside of the toilet and flatten, and use a circle of glue to connect the tube to the wall.

Do not use water after 42 hours of installation. Wait until the glue is dry.

The method of water seepage at the connection between the toilet and the ground is as follows:

If it is water seepage at the place where the hole under the toilet and the hole of the floor drain are connected, first wipe the glue around the hole of the floor drain, clean the drain hole under the toilet, coat a thick layer of glass glue along the edge of the hole of the floor drain, print it according to the base, evenly coat the glass glue, put the toilet back on it according to the seal of the painting and press it tightly, and wipe off the excess glue pressed out at the bottom of the toilet with a rag along the bottom, and it can be used almost after 24 hours of pre-defeat.

If the internal parts of the tank are aging, the parts need to be replaced. If the toilet itself is cracked and leaking, it is best to replace it with a new one. If there is a problem with the water inlet group and the water outlet group of the toilet, open the water tank first, if you see the water tank overflowing, and the water flows out of a water pipe, it means that the water inlet group is damaged.

Toilet introduction:

A toilet, also called a toilet, is a bucket with a lid for urinating and urinating. The invention of the toilet is known as a great invention, which solved the problem of people eating and drinking in and out of Lazar. Later, it evolved into a flush toilet using the principles of siphon, spiral siphon, and now the latest jet siphon and superspin siphon.

There are also people who believe that the flush toilet is the root of all evil because it consumes a lot of domestic water. There are many classifications of the toilet bowl, there are split and conjoined. With the development of science and technology, many novel varieties have also appeared.

According to the matching method of the toilet seat, it can also be divided into ordinary toilet and smart toilet. Smart toilets can also be further divided into automatic set change smart toilets and non-automatic set change toilets, the former includes automatic set change plus flushing, automatic change set with flushing and drying and other different types.