The mechanical watch accidentally fell and stopped. What s going on. How to fix it?

In the case of a mechanical watch, the interior is composed of many delicate small parts, which work together with each other, and the more expensive the mechanical watch, the more complex and delicate the internal working structure.

First of all, I feel that it is necessary to figure out the working mode of the watch in order to understand that it is **damaged. Represented by the anchor lever escapement, it works reliably because it has two things:

The mechanism has traction, and the escape teeth have an angle to the fork of the pallet fork, which causes the fork body of the pallet fork to be close to the limit nail without moving.

Thanks to the safety design, even if an external force causes the pallet fork to move, there is a safety between the safety peg of the pallet fork head and the lower disc (safety) of the balance wheel, which prevents the pallet fork from continuing to move and allows it to reset itself under the traction moment.

After the watch is dropped and damaged, under the severe vibration impact, the longest problem is generally the occurrence of reverse swing. The so-called reverse pendulum is also called back pendulum, these are common names, and what really means that the pallet fork is out of the correct position and jumps to the other side.

It is very easy to repair the fault of the back pendulum of the watch, remove the hem splint, do not need to disassemble any parts, just carefully re-set the pendulum to solve, this kind of maintenance is not very difficult and skillful, if you have tools at home, you can repair it yourself. However, if the watch still does not resume moving after such maintenance, it is necessary to consider whether the internal gears are misaligned, this kind of maintenance is more complicated, and it is necessary to use precision tools to fine-tune the internal gears of the watch, and it is not recommended to operate it personally.

In addition, if the watch always appears regardless of whether the watch is often broken or not, it is necessary to pay attention to the fact that there may be a problem with the safety gap of the escapement inside the watch, and you should change the pallet fork or check and reduce the safety gap at each point of the escapement (mainly between the fork nail and the safety plate). If your watch is more expensive, it is recommended that you go to a specialty store for professional repair.

Hello, yes: if **, go to the store to send it for repair. If not, find a watch repairer and ask if you can fix it.

Features of mechanical watches.

1. Unlike quartz watches, the second hand of a mechanical watch moves continuously and uninterruptedly.

2. Due to the complexity of the mechanical watch movement, the time error is large (depending on the brand) is generally allowed in the range of +-45 seconds, and the error of the chronometer movement is small, one day.

The error is normal within -4 +6 seconds. The time error of the mechanical watch cannot be accumulated, and the watch needs to be adjusted after a period of time.

3. The process is fine, easy to use, and the spring can go for more than 36 hours.

4. The movement has a long service life.

5. The appearance is thicker and heavier than that of quartz watches (depending on each brand), and some brands are also very thin, but they are generally manual mechanical watches.

Of course, this kind of professional behavior is handed over to the watch repair master, don't dismantle it blindly, the clock shop will repair it for a few dollars.

If you don't leave, you go to the repair test, and then you can repair it.

It's good to contact the manufacturer, it should be that the mainspring inside is broken, and it can be returned during the warranty period.

If you **, go to the store to send it for repair.

If not, find a watch repairer and ask if you can fix it.

It is best to take a picture to see the movement, if it is an automatic watch, first tighten the wind, generally about 20 times; Observe the oscillation of the balance wheel, it can run for 1 2 days in the static condition, indicating that the movement is not in serious trouble; After observing the accuracy and guessing degree, if there will be an error of more than 5 minutes a day, consider that the previous bump caused the offset of the outer pile of the hairspring, and the solution is to open the back cover to adjust the outer pile. If the error is less than 5 minutes, you can adjust the speed and slow needle through the auspicious type.

The mechanical watch fell and went fast when it was going fast for the following reasons:

1.The hairspring is magnetized: The hairspring is one of the most magnetized parts of a watch.

2.The watch has been hit or impacted: it may cause loose damage to the internal parts, and it may also cause problems with the time.

3.The movement is short of oil or the internal parts are worn and aged: both can cause timekeeping problems and need to be maintained.

4.The watch is magnetized: If the hairspring of the watch is magnetized, the watch will not be accurate.

If your watch is fast, it is recommended to send it to a repair center for inspection and adjustment to restore the watch to the normal error range.

How much it costs to repair depends on which piece you are repairing and whether there are replacement parts. The internal parts of a mechanical watch are very complex and precise, and they are not the same in different places.

The maintenance of mechanical watches** mainly depends on the maintenance and replacement parts of the watch** and the maintenance labor charge**. Relatively speaking, the more expensive the watch, the more expensive the replacement will be. General mechanical watch repair** is all inHundreds to thousandsSome watches are seriously damaged, and the repair cost is tens of thousands.

Mechanical watches should be maintained at ordinary times, and after the mechanical watch is damaged, it should be noted that do not open the cover of the watch without authorization, which is easy to cause secondary damage.

The cost of watch maintenance is generally given by a professional maintenance master after a comprehensive inspection of the watch, and will also explain to you the specific maintenance items corresponding to the maintenance **, so that you are more aware of which part of your watch is repaired, and you will be more assured to hand over the watch to the master.

It may be that after falling to the ground, the battery is loose, you can disassemble the battery and reinstall it. This reason can be solved by yourself, if it is other reasons, then don't force it yourself, it may make it worse, or find a special repair shop to repair it! If the watch is not expensive, then take this opportunity to get a new one!

What should I do if I come to your watch and accidentally say that I won't leave? So we have to take the watch shop to repair it, so the watch must have broken down, so we have to take the watch shop to repair it, and then return it to someone else after repairing it.

Summary. A mechanical watch can break if it is accidentally dropped on the ground.

Can a mechanical watch break if it accidentally falls to the ground?

The common fault of mechanical watches is that the timing is inaccurate, especially when the watch accidentally falls to the ground, the gravitational acceleration causes great damage to the watch.

Possible damage to the appearance of the watch, such as: case cuts, scratches, crooked handlebars or broken watch glass; The other is internal to the watch, including the deformation of the dial, the falling off of the characters, the falling off of the watch hands, the falling off of the luminescence, in addition to the movement parts.

The most "delicate" parts in the watch movement belong to the balance wheel and hairspring. The balance wheel is because its shaft is very thin, about only, the balance wheel does high-speed ** rotation in the watch, and the entire mass of the balance wheel depends on it to support. Nowadays, brand watches are equipped with shock absorbers, which can effectively protect the balance shaft vertebrae from being damaged under the strong vibration of the surf piano watch.

If there is a broken place, it is recommended to find a special maintenance personnel for repair.