The steps for installing elevators in old buildings, and what procedures are required for installing

Now the elevator must be considered in the process of building construction in the community.

In this way, it is very inconvenient to wait for the residents to move in and not have to climb the building every day. In fact, if you want to install an elevator, you need to report to the local building planning bureau, and if you apply to the building planning bureau, you must summarize the elevator declaration procedures. Some old buildings without elevators can also apply to install elevators, because the installation of elevators can facilitate people's lives.

Of course, some old buildings are not high floors, and there is no difference between them and no installation, so there is no need to install them.

The process of installing elevators in old buildings:

1. Convene a meeting of all owners, set up an additional elevator management team with the building as a unit, recommend the owner's representatives, and be responsible for the establishment of elevator fundraising, construction, installation, maintenance, and management of related affairs.

2. Prepare relevant information to the municipal urban and rural planning department.

After the application is publicized and approved according to the regulations, the "Construction Project Planning Permit" will be obtained.

3. Go to the fire department to handle the fire protection design review, fire protection acceptance or filing of construction projects.

4. Relevant licenses or consents shall be obtained for those involving power supply, water supply, telecommunications, cable television and other departments.

5. Entrust the design unit with the corresponding qualification level to carry out the design, the drawing review agency is qualified, and the construction unit is constructed.

6. Go to the construction administrative department for quality and safety supervision registration and construction permits.

7. The owner shall conduct on-site supervision by himself or by entrusting a supervision unit with corresponding qualifications.

8. The construction and installation of elevators for existing residential buildings shall comply with the requirements of the "Regulations on the Safety Supervision of Special Equipment" and the "Regulations on the Safety Supervision of Special Equipment in Guangdong Province", and shall be tested by institutions with corresponding qualifications, and the procedures for completion acceptance shall be handled in accordance with the law.

9. After the real estate owner jointly invests in the addition of elevators, it shall apply to the real estate registration agency for recording in the real estate registration book in accordance with the relevant provisions of the Housing Registration Measures (Order No. 168 of the Ministry of Construction). Note: Items (2) to (6) can be jointly handled by the administrative service center and on behalf of the agency to reduce the service links and shorten the service time.

The above is the specific content of the process of installing elevators in old buildings, before the pre-approval publicity of home improvement elevators, the declarant needs to prepare all relevant information (including pre-approval publicity notarial certificates) and drawings within the specified time, and then report to the local planning bureau to apply for a license, after all, the application process for the construction project planning permit for building elevators is also more complicated. The applicant can only start construction within the validity period after applying for a permit, and in addition, after the completion of the project, it must be reported to the Planning Bureau for relevant acceptance procedures.

What you need to know about installing elevators in old buildings.

The approval procedures for the installation of elevators in old buildings are very complicated, involving multiple departments such as planning, land, quality supervision, and fire protection.

Guiding Opinions on Public Solicitation of Elevators for Existing Residential Buildings in the City" clarifies the materials that need to be provided:

1. Signature of two-thirds of the households.

2. The real estate certificate of each household.

3. Drawings of the design institute.

4. Power of attorney.

5. Business license of elevator company.

6. Installation and maintenance qualifications.

7. Qualification of design unit.

The Opinions also simplify the approval procedures, so that the original required sunshine analysis charts, noise tests, etc. are no longer required.

The procedures required for installing elevators in old buildings are as follows:

1.Entrust the safety appraisal of building structures. The construction unit entrusts the safety inspection and appraisal of the original structure of the residential building, and the construction engineering quality inspection agency and the housing safety appraisal unit issue the testing and appraisal report or the engineering design unit that undertakes the elevator addition design issues the seismic appraisal air training report.

If the test appraisal report or seismic appraisal report determines that there is no structural safety hazard, the elevator can be applied for.

2.Handle the planning review of construction projects. If an elevator is added to an existing building, if the elevator shaft is reserved during the completion and acceptance of the original Li Chai housing building, there is no need to go through the planning and approval of the construction project.

If the elevator shaft is not reserved, the qualified architectural design unit shall first report the design plan for the addition of the elevator to the planning department for review and issue a review opinion, and if it meets the planning and standards, it shall enter the construction drawing design document procedure and conduct the construction drawing design review in accordance with the regulations. According to laws and regulations, such as fire protection, which requires approval, shall be handled in accordance with relevant regulations.

The procedures for installing elevators in old buildings are:

1. Signature of two-thirds of the households. First of all, the installation of elevators in old buildings must be signed by more than two-thirds of the owners.

2. The real estate certificate of each household is roughly grasped. Residents are then asked to provide proof of ownership.

3. Drawings of the design institute. Then it is to take the owner's certificate to agree to the installation, and let the elevator company design the drawings.

4. Power of attorney. Submit a power of attorney for the installation of an elevator.

5. The business license, installation and maintenance qualification, and design unit qualification of the elevator company. The elevator company must provide the relevant business license certificates. The stool is finished.

The installation of elevators in old residential areas is a complex process involving multiple links and departments, and the specific process may vary depending on factors such as region, policy, and property management. The following is the general process of installing elevators in old residential areas:

1.Demand Survey and Solicitation of Opinions:

The property company or owners' committee investigates residents' needs for additional elevators and solicits residents' opinions.

Determine the location, scheme, design, etc. of the additional elevator.

2.Preparation of a feasibility study report:

Entrust a professional organization to study the feasibility of installing elevators, including technical, economic, social and other aspects of the assessment.

Preparation of a feasibility study report to clarify the necessity and feasibility of installing elevators.

3.Ask for comments and votes:

The feasibility study report will be publicized to the residents and their opinions will be solicited.

If the issue of co-ownership is involved, residents may need to vote and reach a certain percentage of consent before proceeding.

4.**Approval:

Submit the application to the relevant ** department and obtain the approval and approval of the relevant department.

Determine the specific standards, specifications and technical requirements for the installation of elevators, as well as safety supervision.

5.Bidding and selection of construction units:

Carry out the bidding letter defense and select the construction unit responsible for the installation of elevators.

6.Construction:

The construction unit carries out the elevator installation project, including construction, installation of elevator equipment, power connection, etc.

7.Safety Acceptance & Operation:

After the completion of construction, the elevator safety acceptance is carried out to ensure compliance with relevant specifications and standards.

After the elevator passed the acceptance, it was officially put into operation.

8.Follow-up maintenance and management

After the installation of the elevator, the property company or relevant management unit is responsible for the daily maintenance and management of the elevator.

Please note that the installation of elevators in old communities involves many interests and problems, and requires full consultation and cooperation. In actual operation, it may also be affected by local policies and regulations, financial support and other factors, so it is best to consult relevant professionals or relevant departments before starting to ensure that the process of installing elevators is compliant and smooth.

The installation of elevators in old residential areas is a more complex process, which needs to involve the approval of the department, the negotiation of the property and the owner. Generally speaking, the process of installing elevators in old residential areas is as follows:

1.Determine the demand: First of all, the owner or property needs to determine the need for the installation of elevators in the community and solicit the opinions of the owners in order to form a consensus.

3.Administrative approval: The application for the installation of elevators needs to be approved by the relevant departments. The specific approval process may vary from region to region, and it is generally necessary to submit application forms, planning plans, construction plans, project budgets and other materials, and approve them in accordance with relevant requirements.

4.Fund raising: The installation of elevators involves a large capital investment and needs to be fund-raised. Funding can be raised by paying a specific amount of fees from the owner, taking out a loan from a bank, or partnering with a developer or third party.

5.Select the construction unit: select the appropriate elevator supplier and construction unit, conduct comparative evaluation, and sign the construction contract.

6.Design and scheme formulation: According to the actual situation of the community, the design scheme of the elevator is formulated, including location selection, elevator size, safety measures, etc.

7.Residents' consultation: In the process of installing elevators, it is necessary to fully negotiate with residents to resolve possible disputes and reach a consensus among all parties.

8.Renovation construction: The construction unit carries out renovation construction according to the design plan, and completes the installation and transformation of the elevator without affecting the normal life of residents.

It is necessary to note that the process of installing elevators in old communities in different regions and specific situations may be different, and the relevant regulations and policies for the installation of elevators may also affect the specific steps and requirements of the process. Therefore, in the specific operation process, it is necessary to further consult and follow the relevant regulations and requirements of the local ** department.

1. Announcement of the results of the consultation. After the applicant completes the consultation of the willingness and the false raising of funds, the district housing management department shall guide the owners' committee and the resident (village) committee to announce the results of the consultation on the wishes of the owners within the community.

2. Planning permission. After receiving the architectural design plan for the installation of elevators, the architectural design plan will be publicized within 5 working days within the community, and the publicity period will be 10 working days. After the publicity, the applicant submits the architectural design plan for the installation of elevators and other materials to the planning department to go through the planning permission procedures, sign the notification commitment, complete the procedures, and issue the "Construction Project Planning Permit" on the spot.

3. Housing safety demonstration. The construction drawing design documents for the installation of elevators shall be demonstrated by the housing safety experts entrusted by the relevant departments. If the materials meet the requirements of the argumentation, the argumentation organization unit shall organize expert argumentation within 7 days, and issue expert argumentation opinions within 3 days after the argumentation meeting.

The design unit shall improve the design plan according to the expert argumentation opinions.

4. Commencement information submission or construction permit. The applicant shall report to the district construction administrative department the basic situation of the elevator installation project, survey, design, construction, supervision unit related contract information, construction project planning permit, housing safety demonstration opinions and other materials.

5. Elevator installation and use registration. The elevator installation enterprise fills in the qualification of the installation and construction enterprise, the planning permission of the elevator installation project, the start of construction, the elevator installation and other information, and accepts the installation supervision and inspection of the elevator by the inspection agency.

It is very convenient to install an elevator in the old building.

With the improvement of people's living standards, the installation of elevators in old buildings is a common phenomenon. So the question is, do you know what is the process of installing elevators in old buildings? What conditions need to be met to install an elevator?

What are the functions of installing elevators in old buildings? Let's take a look.

First of all, the design unit surveys the site and conducts a residents' meeting to discuss the preliminary design plan; Secondly, the district additional ladder office for the first instance, and the first person will hand over the relevant information to the community for preliminary examination; Finally, the pre-approval publicity, cost decomposition and layout objection, selection of the general lead unit, signing of the ladder increase agreement and declaration of planning permit and receipt of the certificate.

What conditions need to be met to install an elevator?

According to the guidance: the installation of elevators in old buildings should meet the following five conditions at the same time:

1.Within the scope of cities and towns, residential buildings shall be constructed for use in accordance with the law; State fiber.

2.non-unitary title;

3.Not included in the scope and plan of housing expropriation;

4.The building height is 4 storeys or more;

5.The building structure of the house meets the safety code.

The installation of elevators in old buildings is a must.

First: there must be handrails in the car, at least one handrail, to facilitate the travel of special groups.

Second: secondly, there should be a sub-operation box, which is convenient for special people in wheelchairs.

Third: the size of the elevator door is 80 cm, which is convenient for special people in wheelchairs to travel.

Fourth: In order not to affect the light of low-rise users, it is recommended that it is best to use the full sightseeing elevator.

Sixth: Power outage emergency devices are also essential.

Seventh: For conditional communities, it is recommended that the elevator be designed according to the stretcher ladder, after all, everyone cannot guarantee that there will be no accidents.

Eighth: the rear wall of the car is recommended to be made of mirrored stainless steel.

Summary: After reading the above introduction, I believe you have a further understanding of the process of installing elevators in old buildings. If you need more relevant information, please continue to ******, and more exciting content will be presented to you in the future.