What is the Roewe 360 chassis ringing

Hello, it is recommended to check the swing arm, upright rod, ball cage, shock absorption, tie rod, wheel bearing problem, I hope mine can help you, I wish you a happy car! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, it is generally a fault of loose screws and damaged rubber parts [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, the flat crossbar rubber sleeve is rotten, or the shock absorber [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello car owner, this suggestion to raise the car to see if there is any loose or empty place, I wish you a happy car [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, check the arm, ball head, stabilizer bar rubber sleeve. I hope it can help you and I wish you a happy car. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello. Check the site hanging. Hope mine is helpful to you. Have a great day! [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, in this case, you need to go to the repair shop to check the chassis, [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The engine of the new car has a little bit of sound, just drive it on.

Check the foot cover [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Roewe 360 center console ringing reason:

1) The plastic mold is offset or installed with displacement, and the protrusion causes the sound of mutual friction and squeezing loosening. Find the location of the noise and confirm the friction point, and put the rubber on the pad just to block it, which has a good cushioning effect.

2) If not, find a car to stop the internal tube of Jipei. If it is loose, fix it first to make a rubber pad.

Roewe 360 center console squeak solution;

1) First, pay attention to listening and observing when walking slowly, pay attention to judging the location of abnormal noise, and see if you have inadvertently put any foreign objects into the toolbox, such as the small wire put by the baby, whether there are foreign objects in the gap of the controller, and whether there are foreign objects around, such as baffles or septa. If there are still sound waves left after cleaning, it means that most of the parts that control the blade are loose during frequent use, or are not properly installed during modifications, etc.

2) When reinstalling the audio Jianwei, there is no tightening of the screws, the gap between the baffles can be plugged with some silicone or whether the plastic pipe connected to the air outlet adjustment device is broken due to cold and hot changes, and the air outlet pipes connected to the two air outlets on both sides of the CD** machine are located inside both sides of the CD** machine, and they are also the most suspected objects of abnormal noise. (3) Twist the place to be tightened once from beginning to end, and then clean up the ** controller, the abnormal noise is the seam of the empty air outlet. There are two clips on the top and bottom of the air outlet, which can be removed by gently prying open with a bottle screwdriver.

After removing, stick it with foam double-sided tape and stick it to the shaking panel to clean it up.

Millions of car purchase subsidies.

The vibration of each mechanism during work will emit a variety of sounds, but the sound does not mean that the car is faulty, in order to avoid unnecessary disassembly, first of all, it is necessary to distinguish between normal sound and abnormal noise.

On the issue of abnormal noise of automobiles, it is difficult for ordinary car owners to distinguish which ones are abnormal noises and which ones are reasonable abnormal noises. Only nearly 20% of the vehicles that went to the repair shop to detect abnormal noises really had a search problem. In the case of a turbocharged engine, there is a must be a difference between the sound and the sound of a naturally aspirated engine; Models with engine guards may also make noises due to friction; After some car owners come into contact with different cars, it is likely that they lack their own understanding of mechanical knowledge, so they can distinguish the abnormal noise of the car and avoid wasting time and energy.

How to identify the sound of a car:

In practice, due to the limitations of working conditions, it is difficult to measure the sound of the car with special instruments, and the sound of the car can only be described and compared with the judgment of the sound in daily life. For example, the "rattling" sound caused by the dry friction of the bearing, and the "clicking" sound made by the excessive valve clearance similar to that of Xiaoshi or the hammer hitting the cement floor.

1. Correctly distinguish between normal and abnormal sounds.

The vibration of each mechanism in the work of the car will emit a variety of sounds, but the sound does not mean that the car is faulty, in order to avoid unnecessary disassembly, we must first distinguish between normal sound and abnormal noise. The normal vibration sound of each system component (such as the noise on the surface of the engine), the impact sound of the gear when shifting, the air intake sound and exhaust sound of using gas as the working source, and the gear meshing noise are all normal sounds. Abnormal noise (abnormal noise) can be divided into slight noise, general noise and malignant noise according to the impact on the performance of the car.

Slight noise, such as the flashover sound of high-voltage electric leakage, the slight loose sound of rolling bearings, etc., the general volume is small, the degree of wear of the parts is not large, and there is no significant change for a long time, and this kind of fault can still maintain the normal operation of the car without repair.

3. When diagnosing abnormal noise, attention should be paid to creating good auscultation conditions and trying to eliminate the interference of other noises, so as not to affect the accuracy of judgment.

It is best to consciously amplify or reduce the sound, that is, use a screw or other metal rod as a stestological instrument to contact the sound part to amplify the sound, or use a single cylinder fire cut-off to reduce the sound to meet the diagnostic needs. The auscultation site should be kept quiet to minimize human interference.

Possible causes of Roewe 360 shock absorption squeak:

1.If the shock absorber itself is caused by oil leakage or bending, it can be replaced directly.

2.If the damping pressure bearing is caused by aging or abnormal wear, it can be directly replaced or lubricated.

3.If the damping spring is deformed, it can be replaced directly.

4.It is also possible that the wheel bearing is abnormal and can be replaced directly.

To check the fault of the Roewe 360 shock absorber, the first thing to look at:

1.Check the shock absorber for oil leakage. Look directly at the shock absorber housing or dust cover, and do not get wet in the rain or wash the car. You can see it at a glance. Very intuitive.

2.There is listening. When driving at low speeds, there is an abnormal sound when the wheels pass through the raised part of the road surface or when there is a slight vibration.

The squeak of the shock absorber is different from the squeak of other chassis and is very dull. If it is a front shock absorber, there is still a noticeable shock on the steering wheel. Find an experienced driver who can accurately determine which suspension was delivered.

3.Also, press the upper part of the suspension section of each selling round wheel by hand, such as pressing the front and rear fenders. For some reason, the shock absorber of the Hu Collapse barrier was pressed hard. This is a symptom of oil leakage in the later stages of the shock absorber. This can only be judged by an experienced service technician.

4.If the shock absorber fails, it can only be replaced, not repaired.

The reasons for the abnormal noise of the Roewe 360 front suspension are:1. Shock absorber damage 2. Flat bearing damage 3. The rubber sleeve is damaged 4. The exact location can only be found after a specific test run.

Millions of car purchase subsidies.