How do you get rid of the glue between the toilet bowl and the floor when it turns black?

1. Mold removal gel: Don't look at the mold removal gel is only a small one, but the effect is very good, and for the north and south, it is very applicable, especially in the rainy season, if the wall of the home is dripping, the whole house is moldy, and the clothes can not avoid mildew, etc., then we will be very anxious, and even sometimes have to do a big cleaning, if you only use dish soap, laundry detergent and other items to clean, there is no way to eliminate the mildew that breeds due to long-term moisture, but you can do it well with mold removal gel, And it's very easy to use.

Gently apply the mold removal gel to the mold area, and then it will penetrate into the crevices to remove the mold, whether it is mold in the crevices or on the wall, and finally rinse it with water to clean, even the mold on the kitchen and bathroom glass glue can be easily removed.

2.Anti-mildew and water-repellent strips: mildew waterproof strip is the simplest, most trouble-free one, we can cut according to their own needs, how much to cut, there will be no waste, the middle comes with creases, the paste effect is very conforming, there will be no warping corners, it is very convenient to paste, a person can do it at home, and kitchen sink, countertop gaps, toilet bottom and other spaces can be pasted with this mildew and waterproof strip, daily cleaning is also very simple, with a rag gently wiped can be clean as new.

3.I remove it and replace it with new glass glue

I asked the master to come directly to the construction to see the master use a tool to clean up the blackened glue, and I asked if it was very simple, as if it was Caihong's brand. There's a sewing kit, you can look at the brand.

The glue on the toilet bowl and the floor has turned black, and the best way is to clean up the previous glue and re-use it with a glue with better mildew resistance.

Clean it up and replace it with a better glue material that is not easy to change color at room temperature.

Wash with laundry detergent and a board brush.

Solution: Preparation of materials: baking soda, salt, water, spray can, toilet water, toilet brush.

Step 1: Add baking soda to the spray can (baking soda has a strong ability to remove stains).

Step 2: Add an appropriate amount of salt to the pot (salt has a sterilizing and disinfecting effect).

Step 3: Then add an appropriate amount of toilet water (flower water has the effect of sterilization and fragrance).

Step 4: Finally, add an appropriate amount of water to the pot and shake for 1-2 minutes to evenly distribute the ingredients.

Step 5: Spray the black stain on the toilet bowl with a spray can.

Step 6: Use a toilet brush to wipe back and forth to clean the black stains on the toilet.

Step 7: Finally, press the flush button, and the toilet has been cleaned.

Tips: In the process of preparing raw materials, do not touch your eyes with your hands to prevent eye injury. In addition, if the toilet is clogged and has stains that are difficult to remove, ask a special cleaning company to clean it.

If there is blackening on the inside of the toilet, it may be due to the build-up of limescale or bacteria. Here are some ways to deal with it:

Clean with a toilet brush: Use a toilet brush and detergent to thoroughly clean the internal surface of the toilet bowl. Choose a cleaner that is suitable for toilet bowl cleaning and use according to the product instructions.

Use calming vinegar and baking soda to clean: Pour an appropriate amount of white vinegar into the toilet bowl and sprinkle with some baking soda. The chemical reaction of vinegar and baking soda can help remove limescale and stains. Scrub with a toilet brush and wait a few moments before flushing.

Consider replacing toilet gaskets or parts: If the blackening inside the toilet can't be resolved with cleaning, it may be due to aging or damaged gaskets or parts. In this case, you can consider replacing these parts or having them checked and repaired by a professional.

It is important to note that for methods using bleach or other chemical cleaners, follow the product instructions and safe operating guidelines, and ensure proper ventilation.

1. You can use some strong detergents to clean it, but you can't try it with dilute hydrochloric acid.

2. There is also a possibility that the sealant on the edge of the base is mildew, and the old sealant can be removed and re-injected with the sealant.

3. After processing and cleaning, we must pay attention to the usual hygiene, and frequent rinsing and cleaning will not cause mildew and blackness.

Now you can directly use edge sealing beauty glue, which is an upgrade of glass glue and solves the problem that glass glue often turns black, so what should I do if the glue on the side of the toilet becomes black? Let me take you to find out, I hope it can help you.

1. You can use some strong detergent to clean it, but you can't try it with dilute hydrochloric acid.

2. There is also a possibility that the sealant on the edge of the base is mildewed, and the old sealant can be removed and re-sealed.

3. After processing and cleaning, we must pay attention to the usual hygiene, and frequent rinsing and cleaning will not mildew and blacken.

Toilet tape is a commonly used sealing material to prevent leakage in the toilet tank. However, due to the length of use, or the influence of water quality, the toilet tape may turn black, which not only affects the appearance, but also affects the sealing effect. Here's how to deal with toilet strip blackening::

1.Wash with vinegar water: Press 1:0 for white vinegar and water

Mix the ratio of 1, apply it to the surface of the toilet tape, scrub gently, let the vinegar water stay on the surface for a few minutes, and then rinse it with water. The acidity of vinegar dissolves dirt and bacteria and makes the surface of the toilet tape whiter.

2.Use pipe unclogging agent: Mix a certain proportion of water with pipe unclogging agent, pour it into the toilet tank, let the unclogging agent and the toilet rubber strip come into contact for a period of time, and rinse it with clean water.

The chemical masking substances in the pipe unclogging agent can remove bacteria and corrosion from the surface of the toilet bowl tape, allowing the toilet tape to return to its original color. Changkong.

3.Replace the toilet strip: If none of the above methods can remove the black and hail-resistant dirt on the surface of the toilet strip, then consider replacing the toilet strip. Equipping the toilet tank with a new toilet rubber strip can ensure the sealing effect of the toilet bowl and ensure the beauty of the toilet.

In daily use, it is very important to keep the toilet bowl clean and wash the water tank and toilet rubber strip regularly. This prevents the toilet bowl tape from discoloring due to the effects of time or when the water level has been static for a long time. Using the above method to clean the toilet bowl strip can keep the toilet bowl clean and hygienic forever.

It is very common for the glass glue under the toilet bowl to turn black due to long-term staining of dirt. It not only affects the appearance of Yunnakuan, but also produces peculiar smells. If not treated in time, it may also breed fungi and pose a threat to human health.

So, what to do if the glass glue under the toilet is blackened? Here are some practical methods for reference.

1.Slow reed lotion cleaning method: You can use cleaning agent to clean the glass glue. First of all, remove the rubber pad, spray the cleaning agent on the glass glue, wait for 10 minutes and then brush it with a brush, and then rinse it with water.

2.Toothpaste scrubbing: Apply an appropriate amount of toothpaste to the surface of the glass glue, scrub it with a brush, and then wash it with water to remove the stain and protect the glass glue.

3.Alcohol decontamination method: pour alcohol on a cotton cloth, apply the cotton cloth to the side of the glass glue, gently scrub with a brush, and then clean the glass glue with water.

4.You can mix vinegar and baking soda into a paste, apply it to the glass glue, wait for about 5 minutes, and wipe it clean with a damp towel.

5.It can also be sterilized by ultraviolet lamp, and the glass glue surface can be exposed to ultraviolet lamp, which can achieve the effect of sterilization and deodorization.

Finally, no matter which method is used to clean glass glue, it is necessary to pay attention to safety and take protective measures to avoid accidental injury** or inhalation of harmful gases. At the same time, it is recommended to wash it regularly to keep the toilet bowl clean and hygienic.

The glue under the toilet bowl is usually used to install the toilet, and after a period of use, the glue will become yellowed after being soaked in water vapor and detergent between the bucket wheels for a long time, and the dismantling will affect the appearance. In order to solve this problem, we can take the following steps:

1.Use white vinegar to clean.

Pour an appropriate amount of white vinegar into a spray bottle, spray it on the gum at the bottom of the toilet, let it sit for a few minutes, and then wipe it with a clean rag.

2.Wash with toothpaste.

Apply an appropriate amount of ordinary toothpaste to the gum, gently scrub with a toothbrush dipped in water, and finally rinse with water.

3.Use alcohol or detergent.

Pour an appropriate amount of alcohol or detergent over the gum at the bottom of the toilet, wipe it with a brush or cloth, and finally rinse it with clean water.

4.Replace the rubber pads.

If none of the above methods can remove bacteria or dead spots, consider replacing the pads. Cut off the original rubber pad and buy a new one to replace it, so as to avoid more damage to the rubber during the cleaning process.

In general, to avoid yellowing of the gum under the toilet, we need to clean and disinfect frequently, do not use detergents containing heavy metals and acids, so as not to damage the gum, it is recommended to replace the rubber pads every 6 months.