Does the home have only putty and no paint?

It's useless. Because if you only scrape putty, there is no protective layer on the outside, and it will fall off. In general, putty powder.

It is to be used with latex paint. If you don't want to use latex paint, it is recommended that you do not use putty powder, but can choose lime or the like. That way you don't have to paint latex paint.

Yes, home decoration is done according to customer requirements, professional decoration companies will give you a guiding opinion for your reference, the effect of painting is better, easy to clean, and looks beautiful.

No, unless you want to paste wallpaper or wall cloth in your home, after scraping the putty, the layer is easy to fall off, it is all gray, and it will turn white when rubbed, so you must apply latex paint. Of course, you can also use diatom mud, which is more environmentally friendly, and wallpaper and wall cloth need to use glue, so the formaldehyde content is higher than that of latex paint and diatom mud. Choose according to your own situation, latex paint is not only environmentally friendly, but also lower, and can also have many colors, and the effect is also very good.

No, Song Jia used a special ** to freeze the bombardment and pay attention to dodge.

Barrett is powerful and has good AWM and high accuracy.

Guerrilla warfare requires submachine guns and good marksmanship.

Wall decoration can only scrape putty, not latex, but it is not recommended! Not only for aesthetic reasons, but also for the sake of aesthetics, let's talk about the role of latex paint on the wall. The plaster is easy to peel off the dust, and rubbing the clothes will leave white marks on the clothes.

Applying a layer of latex paint can protect the wall, and the clothes will not get dirty when they jump on it, and sometimes the stains can be easily wiped off if they accidentally get on them. Latex paint also has a certain degree of air permeability, and will not appear to bulge the wall due to the increase in summer temperature. From the above, we can see that it is still necessary to paint the wall with latex paint.

Yes, you can choose whether to paint or not according to your needs.

Yes. Before decorating the wall, the most important thing is to check the wall to see if it is solid and flat. If there are cracks or holes in the wall, they need to be repaired and leveled with plaster.

Generally, the wall can be scraped with putty 2 times, the wall with poor flatness needs to be scraped several times, and the more serious ones need to be leveled by gypsum first, and each putty batch scraping needs to be more than 2 hours.

Protect the materials and furniture in the room and clean up the floating dust in the room. Then roll the concrete interface paint evenly, and after it dries, you can start scraping the putty. If it is a newly built wall, you need to wait for the 28-day cement curing period before scraping putty.

OK. PuttyIt is a kind of decorative supporting material for leveling the surface of the wall, and it is a thick slurry material, which is an indispensable product before paint painting. It is applied to the primer or directly applied to the object to solve the uneven defects on the surface of the coated object.

Latex paintIt belongs to the last decorative material, which is decoration and finishing, in short, for the sake of beauty.

The wall decoration pays attention to "three points of paint, seven points of putty". If the putty layer can be smooth and durable, and does not fall off, does not mold, does not vomit alkali, does not chalk, etc., then it will not affect the decoration without brushing latex paint.

This puts forward higher requirements for the performance of putty:

1. Water resistance: water resistance is often an important symbol to determine the quality of putty, putty with good water resistance not only has good adhesion under mildew and moisture conditions, but also has great help to the film formation of the coating on its surface.

2. Bonding strength: Bonding strength is an important indicator of putty. The bond strength is poor, and it is easy to peel, fall off, and polish loosely.

3. Environmental protection: putty accounts for a negligible proportion of home decoration costs, but its construction area accounts for more than 80 of the total area of home decoration.

4. Smooth and delicate: After the putty is polished, some fine sand marks will be formed, which is conducive to the adhesion of latex paint, but if the sand marks are too coarse, the latex primer is difficult to fill and cover, which will affect the smoothness of the coating surface.

5. Constructability: good batch scraping, easy to polish, batch thickness is not easy to self-crack.

Of course, you can only scrape putty without latex paint, and this is entirely up to your own choice. However, if you paint latex paint, the wall will have stronger stain resistance, weather resistance and scrub resistance than the wall with only putty.

1) The surface of the putty is uneven, while the lacquer is uniform and flat.

Putty is a paste-like wall and does not have leveling (a property that liquid paint can achieve by controlling surface tension), so it is easy to have stubble and spatula marks. Students who have no concept can think about whether there is any way you can make the toothpaste evenly spread all over the wall without leaving a stitch, this is the difficulty!

Of course, there are many painters who can deal with it very well and avoid these defects as much as possible, but most people still can't do it so well, and with the popularity of latex paint, there are fewer and fewer who can do it well.

Latex paint is leveling, and in order to improve the expressiveness of latex paint in terms of flattening characteristics, the putty is sanded before painting. The defects and joints on the surface of the putty are solved by grinding (improper grinding methods will also cause many problems, digging pits, and there is time to talk about them in detail). Therefore, it is better to do latex paint than not to do it before.

2) Putty is easy to peel off powder, and latex paint can do not fall off powder.

There is a widely circulated joke in the industry: after the completion of the Beijing West Railway Station, the leaders came to inspect and felt that they were satisfied, but they lost their temper because the wall skin fell off. Less than a year later, the water-resistant putty standard was introduced (1998).

I believe that the post-80s and post-90s generations have this experience, the wall looks very good, but if you accidentally rub it, it will be white. It turned out to be a common thing, but in fact, it was just because of the poor quality of putty. The initial manifestation is powder loss (rubbing a white body), and the later manifestation is peeling and cracking and falling off.

After the putty standard was improved, it has not been fully implemented until today, and the most critical reason is that latex paint is coming! Even if the quality of the putty is very poor, at least it will not lose powder after painting, and even if it peels again after two years, it can be endured.

3) The putty is basically only white, and there are many options for latex paint colors.

The core feature of latex paint is color! Every international latex paint brand enters China, and the first card to play is color. From dark to light, from light to dark, all colors are fully covered!

Can the wall decoration only scrape putty and not paint latex? That's what the master said!

Yingge 163 read 12126 ext. 32017-02-20 share collection.

I heard a friend say that when he was decorating, the wall was only scraped with putty powder, and he didn't paint latex paint.

The master said that latex paint belongs to the last decorative material, which is decoration and finishing. In short, it's for the sake of a beautiful picture.

It can also be directly powdered and white, the key is the master of construction, and the craftsmanship is good.

If you are afraid of losing powder: the base layer is watered two days in advance; Add more glue and cement when plastering; Pay attention to sprinkling water for a week after one day.

The master also told me that the current putty is made of 901 glue, which will not lose powder. The cheap 801 that I used before will lose powder.

The survival effect is hard and smooth. This has something to do with the ratio of putty.

Of course, there are three things to note:

1 The project scrapes the wall, and the putty with glue mixed with ore powder is also used! It's not that if you don't get rid of the powder, you can use it in your own home, it's glue! There is a need to worry about contamination.

2 801 glue and 901 glue, has there been an evolution? Some! The main thing is that the gelatinization is bigger and stronger, but both are just as bad in one thing - glue is toxic!

3 Go to the building materials market to see, putty powder more than 400 yuan tons should be good.

I have a rental house, after receiving the house, the water floor, the wall and the roof three times waterproof putty, only the bathroom and kitchen are tiled, 09 years to the present, the wall does not have any symptoms such as powder, the feel is still as smooth as the popular melamine paint of the era.

1. It is okay to only brush putty on the wall without latex paint, but it is not recommended to do this. Putty belongs to the thick paste paint for wall decoration, which can play a role in decorating and decorating the wall; However, if the wall is only brushed with putty and not latex paint, it is easy to have problems such as powder loss, uneven surface, peeling and cracking.

2. When decorating the wall, it is best to scrape putty first and then brush latex paint. Compared with only scraping putty, painting latex paint on the wall will be more flat and even. Because latex paint has the characteristics of leveling, it can improve the flatness of the wall; Moreover, the emulsion paint has good color retention, alkali resistance, weather resistance and air permeability, which has the effect of protecting the wall, and its colors are diverse and the decorative effect is also good.

3. Scraping putty is one of the most important steps in wall decoration, we must first treat the wall before scraping putty, such as cleaning up impurities, filling the depression with plaster, etc. Next, we apply an interface agent, which strengthens the adhesion to the substrate. Then scrape the putty 2-3 times, the thickness of each putty is about 1mm, and the putty needs to be polished after it is dry.

4. If you don't want to paint latex paint on the wall, after scraping the putty, you can also paste wallpaper and wall cloth on the wall. Wallpaper and wall cloth have a variety of styles, simple and convenient construction, and high environmental performance. If you are not satisfied with the style and color of the wallpaper after a few years, you can also change it at any time.

After scraping putty, whether to apply latex paint, the master will tell you the reason!

1. You can chop it for years. It is okay to apply latex directly without scraping putty in the blank room, but there will be many drawbacks. So not recommended.

2. The blank room does not scrape putty, and direct application of latex will lead to a large amount of latex paint consumption, which requires one or two times of normal latex and direct application of latex, and there will be fine porous black spots. 3. Applying latex directly without scraping putty may also lead to poor flatness relative to the book. Scraping putty itself is to close the rough pores of the cement wall, and if you do not scrape putty, direct application of latex will lead to poor wall flatness, and the later primer and topcoat will also be uneven.

In the process of scraping putty, tiny holes and cracks in the wall can be filled, making its surface smooth. Scraping putty is good for paving the way for latex and topcoat in the later stage. 2. Scraping putty often has a decorative effect.

It can express a variety of textures and patterns in different ways. There are orange peel patterns, embossed patterns and so on. Scraping putty can increase the aesthetics of the wall and become one of the important decorations of the room.

3. There are other uses for scraping putty, such as being used as tile adhesive or high-elastic anti-crack type, etc., to lay the foundation for later decoration, which is often necessary in this case.

Summary. 1. There are not too many harmful substances in the wall materials, unless the quality of the materials you buy is too poor. Dabai is the main component of wall putty, it will not produce toxicity, the harmful substances are mainly the glue used to prepare putty, but now there is also formaldehyde-free glue, the same is true of latex paint, the key to quality is to buy the material can not be too bad.

2. Dabai is the main component of wall putty, there is no formaldehyde, it will not produce toxicity, the harmful substances are mainly the glue used to prepare putty, but now there is also formaldehyde-free glue, the same is true for latex paint, the key to quality is to buy the material can not be too bad.

3. Scraping the big white is scraping putty, and what needs to be paid attention to is the flatness of the hanging, as well as the full scraping. After scraping white, it is sanded, and after polishing, latex paint is applied. There may be formaldehyde release in the construction glue used to make it bigger, especially like the glue, the formaldehyde content is not low.

How long can you stay if you only scrape putty and don't paint it.

Hello dear, I am helping you inquire about the relevant information and will reply to you immediately.

It's a house that has been repaired for a few years and then painted with white walls How long can you move in.

Dear, hello, the questions you asked are as follows: for interior decoration, if only scrape putty powder, and the materials selected are regular manufacturer brands, products that meet environmental protection quality standards, and the components of each bend sail contained in putty powder must meet the requirements, then you can usually move in one week after decoration. However, for safety and health reasons, it is recommended to carry out formaldehyde measurement and inspection before moving into the house, if there is no quality problem in the test, the formaldehyde content does not exceed the standard before moving in.

If the test is not possible due to limited conditions, it is best to open the window of the room and ventilate it for 3-6 months before moving in. Sincerely hope to help you, I wish you a happy life! If you find it helpful to you, please give it a thumbs up, thank you!

Does the ordinary scraping white have formaldehyde?

1. There are not too many harmful substances in the wall materials, unless the quality of the materials you buy is too poor. Dabai is the main component of wall putty, it will not produce toxicity, there is a god to cultivate the substance is mainly the glue used to prepare putty, but now there is also formaldehyde-free glue, the same is true of latex paint, the key to quality is to buy the material can not be too bad. 2. Dabai is the main component of wall putty, there is no formaldehyde, it will not produce toxicity, the harmful substances are mainly the glue used to prepare putty, but now there is also formaldehyde-free glue, the same is true for latex paint, the key to quality is to buy the material can not be too bad.

3. Scraping the big white is scraping putty, and the only thing to pay attention to is the flatness of the hanging, and the search for signs is full of scraping. After scraping white, it is sanded, and after polishing, latex paint is applied. There may be formaldehyde release in the construction glue used to make it bigger, especially like the glue, the formaldehyde content is not low.

The old house is renovated only with white walls, and you can move in for a long time.

Hello dear, I am helping you inquire about the relevant information and will reply to you immediately.

Only whitewashed walls can generally be moved in for 7 days.