Is it feasible to scrape putty on interior decoration paper without latex paint?

According to personal experience and the understanding of the master in the interior decoration paperScrape puttyDo not brushLatex paintis doable.

It's okay to smooth and calender putty without latex paint, and that's what my family does. Because there are children at home, it is inevitable that the wall will be graffiti, dirty, and the latex paint is also white, and the wallpaper takes into account environmental protection issues, plus spending thousands more has no obvious decorative effect. Therefore, after comprehensive consideration and discussion with oiler friends, it was determined that the whole house only makes putty and does not make latex paint wallpaper.

Benefits of making putty

1.The first is environmental protection. The wall is only made of putty, which reduces the decoration pollution that may be caused by other wall decorations such as wallpaper latex paint, and the putty is environmentally friendly and non-toxic, and there is no formaldehyde release.

2.The second is affordable. The cost of putty engineering is economical, and the house of 100 square meters uses some putty powder.

It costs 3,000 yuan to bring materials. If you do latex paint, you need at least 6000 yuan.

3.Then there's the decorative effect. For white walls, the difference between putty and latex paint is not very big. It's just that putty doesn't have the gloss of latex paint.

Finesse. And the putty will have some traces of the putty scraper. When you look at it against the wall, there will be some imprints.

In addition, it is convenient to renovate, putty wall renovation is relatively easy, and after a few years, you can directly hang putty again.

It can be refurbished. Usually some dirt can be repaired directly with putty paste, or gently sanded with sandpaper. If you want to paste wallpaper or make latex paint, sandpaper can be sanded directly, and you can roll latex paint or paste wallpaper.

Therefore, it is okay to only make putty on the wall and not to make latex paint, especially if the decoration is ready to be rented, and the house you live in after a few years, or if you want to decorate it more environmentally friendly.

The disadvantage of only scraping putty is that the details of the wall are not very good, there is no gloss, and it is easy to get dirtyBecause the sealing of putty is not very good, the surface is rough, it is easy to hang dust, absorb moisture, and cause the wall to be dirty. If you use it for a long time, you will have the problem of loose and depowdered surface, and it needs to be renovated.

It is not feasible not to brush latex paint, because the kind of putty that does not brush latex paint is particularly unstable, and it will be particularly fragile and peeling when you bump it in the future, and it will also be very affected by the use rate of the wall.

In fact, it is not feasible, because if you don't paint latex paint, the overall wall will not be so smooth.

It should not be feasible, because if you only take care of the putty, the putty may fall off quickly, and it will not play a fixed role at all.

It is feasible, so you should choose the wall decoration according to your own decoration style, which will make it more convenient for you to live.

OK. PuttyIt is a kind of decorative supporting material for leveling the surface of the wall, and it is a thick slurry material, which is an indispensable product before paint painting. It is applied to the primer or directly applied to the object to solve the uneven defects on the surface of the coated object.

Latex paintIt belongs to the last decorative material, which is decoration and finishing, in short, for the sake of beauty.

The wall decoration pays attention to "three points of paint, seven points of putty". If the putty layer can be smooth and durable, and does not fall off, does not mold, does not vomit alkali, does not chalk, etc., then it will not affect the decoration without brushing latex paint.

This puts forward higher requirements for the performance of putty:

1. Water resistance: water resistance is often an important symbol to determine the quality of putty, putty with good water resistance not only has good adhesion under mildew and moisture conditions, but also has great help to the film formation of the coating on its surface.

2. Bonding strength: Bonding strength is an important indicator of putty. The bond strength is poor, and it is easy to peel, fall off, and polish loosely.

3. Environmental protection: putty accounts for a negligible proportion of home decoration costs, but its construction area accounts for more than 80 of the total area of home decoration.

4. Smooth and delicate: After the putty is polished, some fine sand marks will be formed, which is conducive to the adhesion of latex paint, but if the sand marks are too coarse, the latex primer is difficult to fill and cover, which will affect the smoothness of the coating surface.

5. Constructability: good batch scraping, easy to polish, batch thickness is not easy to self-crack.

Of course, you can only scrape putty without latex paint, and this is entirely up to your own choice. However, if you paint latex paint, the wall will have stronger stain resistance, weather resistance and scrub resistance than the wall with only putty.

1) The surface of the putty is uneven, while the lacquer is uniform and flat.

Putty is a paste-like wall and does not have leveling (a property that liquid paint can achieve by controlling surface tension), so it is easy to have stubble and spatula marks. Students who have no concept can think about whether there is any way you can make the toothpaste evenly spread all over the wall without leaving a stitch, this is the difficulty!

Of course, there are many painters who can deal with it very well and avoid these defects as much as possible, but most people still can't do it so well, and with the popularity of latex paint, there are fewer and fewer who can do it well.

Latex paint is leveling, and in order to improve the expressiveness of latex paint in terms of flattening characteristics, the putty is sanded before painting. The defects and joints on the surface of the putty are solved by grinding (improper grinding methods will also cause many problems, digging pits, and there is time to talk about them in detail). Therefore, it is better to do latex paint than not to do it before.

2) Putty is easy to peel off powder, and latex paint can do not fall off powder.

There is a widely circulated joke in the industry: after the completion of the Beijing West Railway Station, the leaders came to inspect and felt that they were satisfied, but they lost their temper because the wall skin fell off. Less than a year later, the water-resistant putty standard was introduced (1998).

I believe that the post-80s and post-90s generations have this experience, the wall looks very good, but if you accidentally rub it, it will be white. It turned out to be a common thing, but in fact, it was just because of the poor quality of putty. The initial manifestation is powder loss (rubbing a white body), and the later manifestation is peeling and cracking and falling off.

After the putty standard was improved, it has not been fully implemented until today, and the most critical reason is that latex paint is coming! Even if the quality of the putty is very poor, at least it will not lose powder after painting, and even if it peels again after two years, it can be endured.

3) The putty is basically only white, and there are many options for latex paint colors.

The core feature of latex paint is color! Every international latex paint brand enters China, and the first card to play is color. From dark to light, from light to dark, all colors are fully covered!

Can the wall decoration only scrape putty and not paint latex? That's what the master said!

Yingge 163 read 12126 ext. 32017-02-20 share collection.

I heard a friend say that when he was decorating, the wall was only scraped with putty powder, and he didn't paint latex paint.

The master said that latex paint belongs to the last decorative material, which is decoration and finishing. In short, it's for the sake of a beautiful picture.

It can also be directly powdered and white, the key is the master of construction, and the craftsmanship is good.

If you are afraid of losing powder: the base layer is watered two days in advance; Add more glue and cement when plastering; Pay attention to sprinkling water for a week after one day.

The master also told me that the current putty is made of 901 glue, which will not lose powder. The cheap 801 that I used before will lose powder.

The survival effect is hard and smooth. This has something to do with the ratio of putty.

Of course, there are three things to note:

1 The project scrapes the wall, and the putty with glue mixed with ore powder is also used! It's not that if you don't get rid of the powder, you can use it in your own home, it's glue! There is a need to worry about contamination.

2 801 glue and 901 glue, has there been an evolution? Some! The main thing is that the gelatinization is bigger and stronger, but both are just as bad in one thing - glue is toxic!

3 Go to the building materials market to see, putty powder more than 400 yuan tons should be good.

I have a rental house, after receiving the house, the water floor, the wall and the roof three times waterproof putty, only the bathroom and kitchen are tiled, 09 years to the present, the wall does not have any symptoms such as powder, the feel is still as smooth as the popular melamine paint of the era.

1. It is okay to only brush putty on the wall without latex paint, but it is not recommended to do this. Putty belongs to the thick paste paint for wall decoration, which can play a role in decorating and decorating the wall; However, if the wall is only brushed with putty and not latex paint, it is easy to have problems such as powder loss, uneven surface, peeling and cracking.

2. When decorating the wall, it is best to scrape putty first and then brush latex paint. Compared with only scraping putty, painting latex paint on the wall will be more flat and even. Because latex paint has the characteristics of leveling, it can improve the flatness of the wall; Moreover, the emulsion paint has good color retention, alkali resistance, weather resistance and air permeability, which has the effect of protecting the wall, and its colors are diverse and the decorative effect is also good.

3. Scraping putty is one of the most important steps in wall decoration, we must first treat the wall before scraping putty, such as cleaning up impurities, filling the depression with plaster, etc. Next, we apply an interface agent, which strengthens the adhesion to the substrate. Then scrape the putty 2-3 times, the thickness of each putty is about 1mm, and the putty needs to be polished after it is dry.

4. If you don't want to paint latex paint on the wall, after scraping the putty, you can also paste wallpaper and wall cloth on the wall. Wallpaper and wall cloth have a variety of styles, simple and convenient construction, and high environmental performance. If you are not satisfied with the style and color of the wallpaper after a few years, you can also change it at any time.

After scraping putty, whether to apply latex paint, the master will tell you the reason!

In the process of decoration, scraping putty against the wall is likely to cause the wall to be powdered, and now most of the decoration will choose latex paint, which is an environmentally friendly material, and the waterproof performance is also better.

There is a possibility that the wall needs to be treated, preferably by wallpaper or latex paint.

This situation will occur, if there is no way to ventilate well, and the ventilation time is relatively long, it is easy to lead to this situation.

You can not brush latex paint, which will lead to powder loss.

Putty can be used to decorate walls with high-build paints, and is a must-have product before painting. It is made up of a small amount of additives, a paint base, a large amount of fillers and a moderate amount of coloring pigments.

The main pigment products used are carbon black, iron red, chrome yellow, etc. It can be used to fill partial depressions in the work surface, or it can be scraped across the entire surface, usually after the primer layer has dried.

Your putty is going to be powdered, and your wall dust will fly like snowflakes. Therefore, it is necessary to paint, you can take a look at the Meitushi paint, which is very cost-effective.

Now the putty is all adjusted.

The original wall is rolled with 805 glue to increase the degree of adhesion, and the glue can be scraped when it is dry.

Now the putty is a finished product, there is no need to add glue, there are dry powder and wet putty, dry powder can be scraped with some water, wet putty can be scraped when opened, but only scrape putty on latex paint, will drag powder sticky clothes, only polished with calcium powder, but it is difficult to do a good job if it is not a regular master.

It is not good to only scrape the putty without brushing the latex paint, the putty will fall off the powder drops, and it will fall off after a while, and you touch the wall with your hand. It will be on your hands, not to mention the clothes, it is recommended that you find a decoration team and brush the latex paint is the most perfect! I can help you if you need it!

I advise you not to do it yourself, I saw a self-taught one on the Melole forum. The thing that was made, let's find someone.

OK. It will lose powder.

Putty can be used to decorate the surface of the wall with thick paste paint, which is an indispensable product before painting the paint. It is made with a small amount of additives, lacquer base, a large number of fillers and an appropriate amount of coloring pigments, and the main pigment products used are carbon black, iron red, chrome yellow, etc. It can be used to fill partially dented work surfaces, or it can be scraped across the entire surface, usually after the primer layer has dried.

Before scraping putty, the wall should be cleaned and cleaned, if there are cracks or missing corners, etc., you can repair it with gypsum powder, or you can use a patch or kraft paper to deal with it.