Washing basin leaking, kitchen washing basin water pipe leaking how to repair

1. Materials. 1.To control the quality of waterproof materials, you should buy waterproof materials with quality and environmental protection coefficients in large building materials supermarkets.

2.Bathroom tiles should be selected products with low water absorption, and the water absorption rate between 2 and 7 is more appropriate. You can soak one-third of the tile in half a basin of water and take it out for observation after 5 minutes.

If the color of the soaked area is the same as that of the unsoaked area, it indicates that the water absorption rate is low.

3.It is best to choose waterproof cement, although it is more expensive, but its performance is excellent, which can reduce the probability of leakage. When solving the problem of pipe root leakage, intumescent materials should be selected to achieve the purpose of plugging leakage, and cement should not be used instead.

4.The thicker the pipe, the smoother the water. Under the premise that the water flow rate remains unchanged per unit time, the water pressure will become smaller when the pipeline is thickened, the water flow rate will be slower, and the dirt will not be easy to rinse off, which will easily cause the pipeline to be blocked in the long run.

5.Pipes of different materials cannot be used together. Even if two sections of pipes made of different chemical materials are squeezed together by external force after hot melting, there will still be gaps after solidification, which will eventually cause water seepage.

Second, technology. 1.Do not change the design of the pipes at will, otherwise it is easy to cause water leakage in the future.

First, do not move water supply lines over long distances. The longer the pipeline, the greater the chance of failure. Second, do not change the location of the toilet at will, otherwise it is easy to leave hidden dangers for future leakage.

2.Try to avoid ground pipes during construction. When you have to walk the pipe from the ground, you must do waterproofing once before you run the pipe, and do waterproofing again after the cement mortar is plastered.

3.Try to avoid glaring in the wall. For some hardware such as towel rods, the thickness of the hole in the wall should not exceed 2 cm, otherwise it is easy to damage the waterproof layer of the wall.

When the pipe must be grooved in the wall, the inner wall of the tank should be carefully coated with waterproof material to prevent condensation from seeping out of the wall in the future.

4.The dark corner of the bathroom should be treated with one to two layers of non-woven joints to prevent the waterproof layer from cracking and leaking. In addition, the pipe connection can be used to build the riser with lightweight bricks, and the dark corner of the riser should also be paved with non-woven fabric to prevent water seepage.

5.In order to avoid water leakage in the corners of the wall, the order of laying the wall tiles and floor tiles in the bathroom should be strictly observed. The wall tiles should be laid first, leaving the last row near the ground without paving, and when the waterproofing and floor tiles are all paved, after reaching the wall, the remaining wall tiles should be laid.

6.The waterproofing of the bathroom should be made in the shape of a basin instead of a dustpan, which not only drains the water from the surface of the floor tiles, but also introduces the floor drain that leaks into the structure of the building.

7.The waterproofing of the corners of the wall and the root of the pipe should not be made flat, but should be made in an arc. In addition, the gap between the floor drain and the tile, the connection between the floor drain and the pipe, the flange of the toilet and other details should be dealt with.

The washing basin is leaking, and it is very simple to buy a new one. Otherwise, the water leakage is very troublesome, and if it affects the downstairs, it will be compensated.

A leak in the sink can be repaired. Find someone who understands and fix it. Or get a new one. Otherwise, it will always leak like this. No, what if you leak downstairs?

It should be that your washing basin has been used for a long time, and the plumbing fittings have aged, so there are two options, one is to buy a new set of sewer equipment in the sanitary ware store, install it under the vegetable washing basin, and the other is to shop online, you can check which part of the sewer fittings has a problem, you can buy separate sewer fittings on the Internet, choose some, the problem should be solved quickly.

If the washing basin is leaking, just replace it, and you can get it for a few yuan.

1. First of all, the water valve should be turned off, until the water in the faucet is all discharged, before it can be repaired, if the screw at the connection is loose, you can directly use your hand or screw to tighten it, if it has no effect, you can use glass glue to solidify it in the leaking place, wait until the glue is dry, and then open the faucet to see if there is still a leakage, if it is useless, then you can only replace a new water pipe. 2. If the above methods do not work, then it is best to ask a commissioner's maintenance personnel to help you do a detailed inspection to see what parts are broken, and then replace them. Reasons for this:

1. It may be due to the fact that the decoration is too long, and the service life has also arrived, resulting in the wear or aging of the water pipe inside, so there will be water leakage, and it may be that the installation worker did not install it in place when it was installed. 2. Or because the quality of the water pipe purchased at that time was not very good, and the operation was not very good when it was used for a long time, so it caused today's phenomenon. 3. Maybe the vegetable washing basin has been used for too long, and there are cracks or cracks in the connection between the washing basin and the water pipe, so the water will leak out when it is used again.

Can be bonded with epoxy adhesive. This glue has the characteristics of high tensile force, anti-aging, waterproof and so on.

Epoxy resin glue features:

1. Basic characteristics: two-component adhesive, which needs to be used in combination with AB, has strong versatility and can fill large gaps.

2. Operating environment: curing at room temperature, indoor and outdoor, can be manually mixed or use AB glue special equipment such as AB glue gun.

3. The applicable temperature is generally between -5 +15 degrees.

4. It is suitable for general environment, waterproof, oil-resistant, strong acid and alkali resistant.

5. If it is a small range of rupture in the vegetable washing basin, wipe the leaking place, squeeze it in the gap at the edge with glass glue, wipe the excess glue around it, and wait until it is completely dry before it can be used. If there is a large tear on the edge of the basin, you need to consider replacing it with a new one, unloading the basin and installing a new one.

The ceramic washing basin has water seepage, 1, you can use soldering to repair the leakage, 2, you can also choose good brothers, 502, and other glue to glue and seal the gap in the vegetable washing basin.

3. You can also go to the plumbing installation store to buy a special plugging agent to solve the blockage.

Once the ceramic washing basin loses its use value once it seeps into water, it will not be used for too long after repair, and should be replaced in time.