How to solve the water leakage under the vegetable basin, and what to do if the water leakage at the

Can be bonded with epoxy adhesive. This glue has the characteristics of high tensile force, anti-aging, waterproof and so on.

Epoxy resin glue features:

1. Basic characteristics: two-component adhesive, which needs to be used in combination with AB, has strong versatility and can fill large gaps.

2. Operating environment: curing at room temperature, indoor and outdoor, can be manually mixed or use AB glue special equipment such as AB glue gun.

3. The applicable temperature is generally between -5 +15 degrees.

4. It is suitable for general environment, waterproof, oil-resistant, strong acid and alkali resistant.

5. If it is a small range of rupture in the vegetable washing basin, wipe the leaking place, squeeze it in the gap at the edge with glass glue, wipe the excess glue around it, and wait until it is completely dry before it can be used. If there is a large tear on the edge of the basin, you need to consider replacing it with a new one, unloading the basin and installing a new one.

The ceramic washing basin has water seepage, 1, you can use soldering to repair the leakage, 2, you can also choose good brothers, 502, and other glue to glue and seal the gap in the vegetable washing basin.

3. You can also go to the plumbing installation store to buy a special plugging agent to solve the blockage.

Once the ceramic washing basin loses its use value once it seeps into water, it will not be used for too long after repair, and should be replaced in time.

Treatment method of water leakage at the interface of the water pipe under the vegetable basin:

1. In the case of a small water leakage, first close the main valve, then clean up the debris on it with a dry cloth, seal it with glue, and finally tie it with tape;

2. If the water leakage is serious, then it is necessary to replace the new sewer pipe to prevent the water leakage from becoming more and more serious.

Kitchen leakage is a very headache for the cleaning and sanitation of the kitchen, and there are two main reasons for the leakage: 1. Leakage at the faucet outlet 2. Leakage at the connection between the faucet and the water pipe.

If there is a leak at the interface of the water pipe under the vegetable washing basin, it may be caused by the aging of the sealant pad or the poor connection of the interface, and the solution is different in different situations.

Leaking parts can be removed, the aging sealant can be replaced, or waterproof tape can be wrapped around the threaded joints of the product, and then reinstalled. The leakage under the sink may also be caused by a broken sewer pipe, so you can replace it with a new sewer pipe, etc.

How to deal with the smell of the kitchen sink drain.

1. If the sewer is blocked and the smell is reversed, it is recommended to pour some alkali into the sewer, and then flush in hot water to remove the oil and odor.

2. If the sewer pipe is not well connected and causes odor, it is recommended to seal the interface with glass glue to prevent gas emission.

3. If the quality or design of the floor drain causes the odor to be reversed, it is recommended to choose the floor drain with anti-odor function, and the water on the floating cover plays the role of isolating the odor.

1. First of all, the water valve should be turned off, until the water in the faucet is all discharged, before it can be repaired, if the screw at the connection is loose, you can directly use your hand or screw to tighten it, if it has no effect, you can use glass glue to solidify it in the leaking place, wait until the glue is dry, and then open the faucet to see if there is still a leakage, if it is useless, then you can only replace a new water pipe. 2. If the above methods do not work, then it is best to ask a commissioner's maintenance personnel to help you do a detailed inspection to see what parts are broken, and then replace them. Reasons for this:

1. It may be due to the fact that the decoration is too long, and the service life has also arrived, resulting in the wear or aging of the water pipe inside, so there will be water leakage, and it may be that the installation worker did not install it in place when it was installed. 2. Or because the quality of the water pipe purchased at that time was not very good, and the operation was not very good when it was used for a long time, so it caused today's phenomenon. 3. Maybe the vegetable washing basin has been used for too long, and there are cracks or cracks in the connection between the washing basin and the water pipe, so the water will leak out when it is used again.

Summary. Hello dear, glad to answer for you. Dear, what's going on with the kitchen sink putting water from the floor drain 1, the sewer is blocked, just dredge it. 2. The sewer pipe is ruptured and the pipe needs to be replaced. 3. If you don't pay attention when washing vegetables, the vegetable leaves will block the sewer.

Hello dear, glad to answer for you. Dear, what's going on with the kitchen washing basin and water coming out of the floor drain 1, the sewer is blocked, just dredge it Zheng Sun. 2. The sewer pipe is ruptured, and the pipe needs to be replaced. 3. If you don't pay attention when washing vegetables, the vegetable leaves will block the sewer.

Pay attention to daily cleaning, and do not let debris flow into the water pipe channel during cleaning. The sail ruler should be blocked at the turn of the washing basin, you can first open the door cabinet of the washing basin, shake the sewer pipe with your hand, and see if the effect is not good, then see if the lower water pipe of the washing basin can be taken out and cleaned up, if the above methods are still not dealt with, then hand it over to professional personnel to clean up.

How do you unclog a sewer?

Is it okay to dredge up at home?

Yes, you can use the sewer dredging agent Sakura Kaili to mix the water, and then unclog the sewer according to the method it packs above, this method is the most accurate way to search the sewer without clogging the sewer.

1. The reason for the leakage of the kitchen sink drain pipe.

Water leakage is due to these reasons: leakage of the faucet outlet, leakage of the gap under the faucet bolt and leakage of the joint of the faucet joint. If the kitchen faucet leaks are the cause of these aspects, we can try to solve it ourselves.

The main kitchen water gate needs to be turned off before repairs.

2. What should I do if the kitchen sink drain pipe is leaking?

The sink is the most important transmission tool for kitchen sewage and is an indispensable part of the kitchen. What do you do if your kitchen sink is leaking? First of all, we need to find out the exact cause of the leaking kitchen sink.

If the faucet is leaking, then you only need to disassemble the red and blue logos of the faucet and replace the rubber pad inside, so that the faucet will not leak, which is very convenient and reliable.

Such a trivial matter is indeed a very troublesome thing for people who are not very proficient in kitchen construction. If the connection between the sink and the countertop is loose, and the water drowning on the countertop, causing it to leak into the cabinet, such troubles are also common. Workaround:

First of all, go to the building materials market to buy glass adhesive strips, because the sealing effect of glass glue is very good, and then seal the glass glue bought back at the junction between the sink and the countertop, so that it is solved, after using this method, you will no longer have to worry about the leakage of the kitchen sink.

If you want to use a convenient and fast way to deal with the leakage of the kitchen sink, you still need to learn more about the installation structure of the sink. It's not surprising that the drain pipe of the kitchen sink is leaking, so what is the best way to solve this problem? Whether it is the leakage of the upper interface, or the leakage between the sink sewer pipe and the underground sewer pipe, it is generally the aging of the rubber pad, or the use of even cracking, only need to disassemble the rubber mat and replace it with a new one.

This diagram looks like the place below the spiral is not tight, you can wrap a little special tape, and then if it doesn't work, it is recommended to replace it or find a plumber to take a look.

Didn't see where it was. If there is a leak in the thread, you have to re-wrap the PTFE tape on the male thread.

Find a plumber to see what you need to change and let the plumber explain the name of the parts and buy it yourself Don't let the plumber buy it The plumber will definitely buy the cheap one and say it's expensive** Just buy it back and let the plumber fix it It doesn't cost much.

The leakage part is determined first, and then the corresponding repair measures are made according to the leakage part. If there is a leakage in the slag remover between the sewer pipe and the vegetable washing basin, it is basically caused by the aging of the rubber pad and the slippery core, so as long as the wax is replaced with a new rubber pad. If it is caused by a crack in the basin, you can use Yun's bucket stone glue to paste the crack.

First of all, understand the cause of the leakage of the washing basin, check whether it is the leakage problem caused by the poor installation of the washing basin, or the leakage of the washing basin caused by the damage of the aging accessories of the washing basin, or the leakage of the washing basin caused by improper use.

Also, if the sink outlet is leaking, replace a shaft pad. After that, use pliers to rotate the gland, remove it after it is loosened, and use the clamp to remove the ground shaft gasket and replace it with a new one.

The gap under the sink bolt is leaking, use a tool to rotate the screw of the faucet, loosen it, remove the screw and tie head, and then loosen the gland and remove it, and then take out the triangular gasket in the gland and replace it with a new triangular gasket.

1. Water pipe joint leakage. The first thing to do is to disconnect the water source and unscrew the interface. If the water leakage at the wire mouth can be removed, if the leakage is not big, you can buy a group of agricultural machinery glue mixed to make up for it.

If it is a metal joint, it is either tightened, if it can't be tightened, it can be removed directly and added some raw material belt and then re-tightened. If it is aging or it is a leakage in the glue or welding joint, it is more difficult, it is best to change to a new fiber racket, and if your own tools and skills are limited, you can find a professional maintenance personnel to repair it.

2. Leakage of sewer pipes. If the PVC sewer pipe is leaking, you can buy a PVC water pipe to connect it yourself, first cut off the broken pipe, put the interface into one end of the pipe first, so that the cutting position of the other end is just flush with the other opening of the interface, so that it can just be straightened, and then send it directly to this end, so that both ends have a certain cross distance (length) and then the sock vertical liquid disassembles it, and uses PVC glue to apply it to the inside of the direct two ends and the outside of the two sewer pipes. You can also buy waterproof tape to repair the sewer pipe, first entangle the leaking pipe, and then wipe it with mortar waterproofing agent and cement.