What to do if the sink is leaking and the bottom of the kitchen sink is leaking

1. Materials. 1.To control the quality of waterproof materials, you should buy waterproof materials with quality and environmental protection coefficients in large building materials supermarkets.

2.Bathroom tiles should be selected products with low water absorption, and the water absorption rate between 2 and 7 is more appropriate. You can soak one-third of the tile in half a basin of water and take it out for observation after 5 minutes.

If the color of the soaked area is the same as that of the unsoaked area, it indicates that the water absorption rate is low.

3.It is best to choose waterproof cement, although it is more expensive, but its performance is excellent, which can reduce the probability of leakage. When solving the problem of pipe root leakage, intumescent materials should be selected to achieve the purpose of plugging leakage, and cement should not be used instead.

4.The thicker the pipe, the smoother the water. Under the premise that the water flow rate remains unchanged per unit time, the water pressure will become smaller when the pipeline is thickened, the water flow rate will be slower, and the dirt will not be easy to rinse off, which will easily cause the pipeline to be blocked in the long run.

5.Pipes of different materials cannot be used together. Even if two sections of pipes made of different chemical materials are squeezed together by external force after hot melting, there will still be gaps after solidification, which will eventually cause water seepage.

Second, technology. 1.Do not change the design of the pipes at will, otherwise it is easy to cause water leakage in the future.

First, do not move water supply lines over long distances. The longer the pipeline, the greater the chance of failure. Second, do not change the location of the toilet at will, otherwise it is easy to leave hidden dangers for future leakage.

2.Try to avoid ground pipes during construction. When you have to walk the pipe from the ground, you must do waterproofing once before you run the pipe, and do waterproofing again after the cement mortar is plastered.

3.Try to avoid glaring in the wall. For some hardware such as towel rods, the thickness of the hole in the wall should not exceed 2 cm, otherwise it is easy to damage the waterproof layer of the wall.

When the pipe must be grooved in the wall, the inner wall of the tank should be carefully coated with waterproof material to prevent condensation from seeping out of the wall in the future.

4.The dark corner of the bathroom should be treated with one to two layers of non-woven joints to prevent the waterproof layer from cracking and leaking. In addition, the pipe connection can be used to build the riser with lightweight bricks, and the dark corner of the riser should also be paved with non-woven fabric to prevent water seepage.

5.In order to avoid water leakage in the corners of the wall, the order of laying the wall tiles and floor tiles in the bathroom should be strictly observed. The wall tiles should be laid first, leaving the last row near the ground without paving, and when the waterproofing and floor tiles are all paved, after reaching the wall, the remaining wall tiles should be laid.

6.The waterproofing of the bathroom should be made in the shape of a basin instead of a dustpan, which not only drains the water from the surface of the floor tiles, but also introduces the floor drain that leaks into the structure of the building.

7.The waterproofing of the corners of the wall and the root of the pipe should not be made flat, but should be made in an arc. In addition, the gap between the floor drain and the tile, the connection between the floor drain and the pipe, the flange of the toilet and other details should be dealt with.

It's easy to do, you can get a new one. If you are reluctant to change it, you can only fix it with glue.

If the washing basin is leaking, it needs to be cut to be leaked, and if the basin is cracked, it must be replaced.

The leakage of the vegetable washing basin is that there is a hole in the basin, and it will not leak if the hole is filled with it. If the small hole is an enamel basin, you can roll it into a cylinder with plastic paper through the hole, and then ignite the part and squeeze it to stick to the basin, and the other side is the same, and the basin will not leak.

The leakage at the bottom of the kitchen sink can be sealed with glass glue.

Check the kitchen drain pipes for problems first. In general, water pipes are particularly prone to water leakage where they turn. The seal may not be enough, and the part of the sewer pipe connection can be sealed with glass glue.

If there is a crack in the sink. We cover it with glass glue, or we can remove it with solder and solder it again, but solder will affect the appearance. The place where the sink and countertop are connected is also the most likely to leak.

At this time, glass glue can also solve the problem, apply it to the crack, and after about a day it will completely solidify, and we can start using the sink.

How to buy a kitchen sink:

1. There are various types of kitchen sinks, such as single sinks and double sinks, and we should decide according to the size of the kitchen area when choosing. Because of the large area of the kitchen, there is also a large countertop space for the cabinets, and there is also a large space for the installation of the sink that can be reserved. For large-area kitchens, you can choose double-sink, triple-sink and other types of kitchen sinks.

The length of the large tank of the double sink should be higher than 875px. If it is a small kitchen, it will be more practical to choose a large single sink.

2. The kitchen sink material is mainly stainless steel, ceramic, quartz stone and other types, if we pursue cost-effective, you can buy stainless steel sink, it has the advantages of corrosion resistance, long service life, easy to clean, etc., we need to pay attention to whether the product has SUS304 logo when purchasing. If you have a high budget and want a more beautiful and high-grade product, you can choose a quartz sink.

3. When choosing a kitchen sink, you also need to pay attention to the faucet of the sink. You can choose single cold or hot or pull-out faucet according to your needs. When purchasing, you can turn on the faucet to check whether the water from the faucet will splash.

When purchasing, it is also necessary to consult whether the sink ** includes accessories such as drainers and faucets** and installation fees.