-
The waistline of a high-rise 32-story building is generally on the 4th, 5th or 16th floors. Generally, when developers build a real estate, they will make some protruding shapes on specific floors, which are called waistline floors.
The developer did this to make the whole building look more stylish, beautiful, and layered. But the specific floor of the waistline floor depends on the entire façade.
Channel steel is a kind of channel steel, and to put it bluntly, it is also a kind of stainless steel plate of groove type. It is generally suitable for steel structure engineering of vertical poles, load-bearing beams and metal bridges, electrical majors.
Generally, the basic embedded parts are made.
It is called basic channel steel. Because of its special shape design and load-bearing capacity, it is also widely used in support structures.
The channel steel layer of the current house is extended, and the channel steel will be solved very well. The anti-corrosion treatment and encapsulation are very tight, and it is not easy to have the problem of previous erosion. Not enough (self-built house):
It is a building made of channel steel, and when people walk in it, there will be a certain shaking sound. (Channel steel specifications and models.)
The quieter, the louder the shaking. The larger the channel specification model, the smaller the shaking sound. )
The channel steel outer pick-up frame is generally controlled at 20 meters. General residential buildings, building heights.
It is 3 meters, 20 meters, which is 6 floors high. If you gradually start from 2 floors, it is 8 floors with picks; If it is gradualized with 3 layers, it is 9 floors. Generally, it is a seven- to eight-layer steel pipe scaffolding.
Set up a layer of channel steel. The channel steel layer of the current house is extended, and the channel steel will be solved very well. The anti-corrosion treatment and encapsulation are very tight, and it is not easy to have the problem of previous erosion.
1. The bottom floor and the top floor are not recommended to buy: the top floor and the bottom floor of a building are not recommended to buy, although in many high-end real estate, the top floor is relatively good, the heart-warming additional design scheme, bathroom, balcony, is simply the dream home furniture venue for the rich to enjoy life, however, many general new real estate top floors are not so humanized design scheme, if the elevator is black, more than 10 or even more than 20 floors of indoor stairs to climb that is called a cool, more importantly, in the summer, the top floor is not only hotIt is not well breathable, and it is also very easy to seep water, and consumes a lot of energy.
2. Stay away from the equipment floor: the equipment layer of the general floor is not on the top floor, or not in the inner floor, in the case of buying a house, you should also avoid the equipment layer as much as possible, the equipment room will not only disturb the rest, and there is a certain diffusion, live in a lifetime of housing, if the daily life is within the coverage range, the harm to the body is quite great.
3. The polluted layer cannot be bought: it is because the natural environment is different, and I have sinusitis.
Or a good friend who is prone to allergies doesn't have to choose a floor with heavy air pollution. In addition, there is noise pollution on some floors.
It is very easy to be restless, and you also need to pay attention to this when choosing friends who have poor sleep quality and like quiet.
-
1.If the floor height is 32 floors, the waistline floor is generally on the 4th, 5th or middle floors, that is, on the 16th floor, and it may be on the next floor of the top floor, that is, in the 31st floor. 2.
The channel steel layer of the 32-storey house is generally on the 10th floor, 17th floor, 24th floor, and 31st floor. The channel steel layer generally starts from 3 layers, 3+7 is equal to 10 layers, 10+7 is equal to 17 layers, 17+7 is equal to 24 layers, 24+7 is equal to 31 layers, and so on. The floor height of the channel steel layer is generally meters, and the specific floor is found to be 10 to 20 floors, and the lowest floor height is the channel steel layer.
-
16 floors, most of them are on the 16th floor, this should be determined according to the specific height, and the channel steel layer of different houses is different.
-
Usually inside the walls. It's about the 31st floor. Because each layer is a steel layer connected to the previous one. If it's the first floor, it's basically connected to the basement.
-
4 or 5 floors, or 16 floors, depending on the structure.
-
The 33-story building has a waistline floor and a channel steel floor on the 9th, 15th, 21st, and 27th floors.
Because the channel steel layer of the building is generally six floors and one place, on the contrary, six floors down is the channel steel layer, of course, there are also buildings that are five floors and one place, so the specific number of channel steel floors of the building needs to be decided according to the total height of the building and the construction method. Channel steel is mainly used in building structures, curtain wall engineering, mechanical equipment and vehicle manufacturing.
Channel steel is a long steel with a groove-shaped cross-section, which is a carbon structural steel for construction and machinery, and is a section steel with complex cross-section, and its cross-sectional shape is groove-shaped. China's channel steel imports are greater than exports. The main production areas are Tangshan Iron and Steel, Baotou Iron and Steel, Shandong Iron and Steel, Huangte, Masteel, Xuangang, Nippon Steel and other steel mills.
Channel steel layer
It is a floor seepage layer paved with channel steel, and channel steel is a long strip of steel with a groove-shaped cross-section, which belongs to carbon structural steel for construction and machinery, and belongs to the section steel with complex sections, and its cross-sectional shape is concave and groove-shaped. Channel steel is mainly used in building structures, curtain wall engineering, mechanical equipment and vehicle manufacturing.
Channel steel is divided into ordinary channel steel and light channel steel. The specifications of ordinary channel steel are 5 to 40 layers. The hot-rolled flexible channel steel specification agreed by the supply and demand parties** is up to 30 layers.
Channel steel is mainly used in building structures, vehicle manufacturing, other industrial structures and fixed panel cabinets, etc., and channel steel is often used in conjunction with I-beams.
-
Dear, I am glad to answer for you: the total floor of the 27th floor channel steel layer and the waist line layer in several layers A 27 layers of channel steel layer is generally on the 6th floor, 12th floor, 18th floor, 24th floor, because the channel steel layer of the building is generally 6 floors, so the 6th floor is the channel steel layer. The waistline may be distributed around the fifth layer, or the twenty-second layer of channel steel is a long steel with a grooved cross-section, which belongs to carbon structural steel for construction and machinery, and is a steel die slide with complex cross-section, and its cross-sectional shape is groove-shaped.
Channel steel is mainly used in building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing.
-
The 29th floor of a 33-story building is not a waistline floorThe waistline floor of high-rise waistline houses is generally on the 4th to 5th floors or in the middle, top floor, and sub-top floors. The waistline floor of a 33-story building is generally on the 4th, 5th, 17th, and 32nd floors. Generally, when developers build real estate, they will do some protruding shapes on some specific floors, and the houses on these floors are called waist line houses.
Disadvantages of the waistline layerAfter the building is designed with a waistline, the floor located in the waistline may have been originally a floor-to-ceiling window, but because of the existence of the waistline, there is more than half a wall on the floor, although this will be safer for families with children, but if it is a house located on a low floor, the indoor lighting is not good, plus this half of the wall, the indoor lighting is even worse.
-
Summary. The waistline room of each building will also be different, and generally according to the height of the building, most of the waistline rooms are set on the 3rd and 20th floors or the 4th and 22nd floors.
Hello, I have seen your question and am sorting out the answer, please wait a while
For a 33-storey building, the waistline room is generally on the sixth floor.
The waistline room of each building will also have a different state finger companion office, and most of the waistline rooms are set on the 3rd and 20th floors or the 4th and 22nd floors according to the floor of the building.
The hazards of the waistline room are: 1. The waistline room is prone to water seepage, because the waistline room is the part of the house that is not good, so such a house will inevitably be exposed to more dry lead wind and sun, and the rain is also easy to be blown into the room by the branches, and the indoor is easy to mold for a long time. If you forget to close the windows one day, the house is in trouble.
2. The master bedroom and balcony are leaked, and there will be serious shrinkage, due to the protrusion of the room type, it will naturally affect the area of the master bedroom and balcony of your home, and because of the blocking, the lighting will also be greatly affected. People have a full floor-to-ceiling balcony, and you can only be semi-floored because you have a roof protruding.
3. The waist line room in the design of the house type is also a safety problem, because it is a prominent room type, and there are many prominent places on the façade, for some residents on the lower floors, this provides some places for thieves to fall down, which is more convenient for thieves to enter.
-
The 22-storey building has channel steel floors on the 3rd, 10th and 17th floors. The distribution of the high-rise channel steel layer depends on the channel steel outer pick-up frame, generally 3 layers of overhang, its height is controlled at 20 meters, and the floor height is 3 meters, that is, every 6 floors with the macro building there is a channel steel layer, from the 3rd floor, the channel steel layer is distributed in the 10th floor, 17th floor, 24th floor, 31st floor and other floor positions, the channel steel layer is the floor paved with channel steel, and the cross-section is groove-shaped strip steel. For the channel steel layer built by the commercial house, there is the same problem as the ordinary channel steel house, when people walk on it, there will be a certain shaking sound.
The smaller the channel size, the louder the shaking sound. The larger the channel size, the smaller the shaking sound. For this reason, it will also have a certain impact on life.
However, the channel steel that is now registered in commercial buildings is generally the channel steel with large specifications and better quality, so the impact is not very large.
Under normal circumstances, the channel steel layer of the building is located on the 6th floor, 12th floor, 18th floor, 24th floor, 30th floor and other floors. >>>More
Housing prices are very high nowadays, and it takes a lot of money to buy a house, so many young people can't afford to buy a house. But when getting married, the woman will ask for a house, thinking that having a house is considered a home, and the man's parents will also spend a lot of money to borrow money from relatives and friends to buy a house for their children. When buying a house, I also inquired about many comparisons, and wanted to find a house with a good environment, high cost performance, and convenient transportation. >>>More
Under normal circumstances, the channel steel layer of the building is located on the 6th floor, 12th floor, 18th floor, 24th floor, 30th floor and other floors. >>>More
In general, the equipment floor of a 17-story building is located on the top floor or basement. >>>More
The channel steel layer of the 33-storey building is generally on the 3rd, 10th, 17th, 24th and 31st floors, because the channel steel layer is generally built every 7 floors. >>>More