Is it necessary to find a professional for a rough home inspection?

It's necessary, it's necessary, it's necessary. Home inspection needs some professional tools, these tools are not low, if you buy it yourself, use it once or twice and it will be idle, plus some professional skills are not well understood, finding a home inspector who understands can reduce a lot of trouble. Hardcover room.

and ordinary rough houses.

It is not only related to the quality of construction, but also to the quality of decoration projects. At the stage of the rough house, some problems can be found directly, and when the decoration is completed, the quality inspection of the grassroots level is relatively complicated.

It is necessary because of this, it is easy to see the problem when there is no decoration, if the decoration is completed, it will be troublesome, and there is a waste of time and money if there is a problem, so it is best to find a professional to check it After all, a house also costs a lot of money.

Whether or not to find a professional for a rough home inspection depends on the credibility of your property as a whole. You can participate in the acceptance of your neighbor's house in a timely manner when you want to inspect your house, if there are more problems, you need to find a professional, if you have less, you can fully understand the situation of your house, you don't have to find a professional.

If you don't, you still need to find a professional person to check, otherwise there may be different degrees of problems when decorating, and many places are not clear to yourself.

It is necessary to inspect the embryo roomAlthough it is only a model of a house, it contains a lot of details, if the acceptance work is not carried out, it will bring great trouble to the later decoration, and will also affect the comfort of living. The acceptance of rough houses is mainly based on walls and floors, because many houses have big problems in both aspects.

When inspecting the house, you need to pay attention to the floor to see how flat it is, you can use a long ruler or a special ruler with a horizontal ruler to check, especially the ground near the wall, to check whether it is flat. At the same time, it is necessary to carefully observe whether there are scratches and cracks.

During the home inspection, it is necessary to see if there are cracks in the wall, such as strength cracks, settlement cracks, temperature cracks, and deformation cracks, which are the most common cracks.

In addition, it is necessary to see if there is any leakage of barbed wire or rebar, and if a problem is found during the inspection, then the developer can finally repair it. During the house inspection, it is necessary to see whether there is a defect in the staircase in the room, mainly to check the flatness of the staircase to see if there is any defect.

Delivery standards for rough houses:

1. All the exterior finishes of the rough room, including the exterior finishes of the balcony and rain cover, should be completed according to the design documents.

2. If the prefabricated floor slab or cast-in-place slab roof is used in each room within the door, it should be leveled without plastering and putty, so as to achieve dense board joints, no cracks, smooth and smooth rubbing, smooth surface and luster, and straight line angles; The concrete of the base floor of each room within the door should be smooth and compacted to achieve firm bonding and no cracks.

3. All kinds of pipelines in the rough house should be entered into the bridge to excavate the rock, pass the water, test the pressure, the sensitive ball test and the heating thermal commissioning and other acceptance work.

4. The ground of the room with waterproof requirements should be planned in strict accordance with the building requirements of the waterproof layer and the protective layer, and two water storage tests should be carried out during the acceptance to achieve no leakage.

5. Public parts, public facilities, various pipes (feeding, drainage, rainwater, heating, heat), electrical equipment (distribution boxes, cabinets, panels, sockets, switches, lamps, etc.) should be completed according to the design documents, and various test items should be completed according to the regulations.

6. Carry out water storage and water drenching tests for rough house surface projects.

7. The slope of floor drain and flooding meets the design requirements, so that there is no flooding, and the joint is tight and smooth, and there is no leakage.

8. The elevation of the cement floor base of various rooms should be considered when reserving the height size requirements for redecoration.

Acceptance of the house is actually a relatively troublesome thing, because there are too many details to pay attention to, such as the walls and floors of the house, water and electricity, etc., these are the details to pay attention to, many friends are buying a house for the first time, and it is also the first time to accept the house, so I don't know how to inspect the house, so what to inspect the house? Is it necessary to inspect a rough house? Acceptance of the house is actually a relatively troublesome thing, because there are too many details to pay attention to, such as the walls and floors of the house, water and electricity, etc., these are the details to pay attention to, many friends are buying a house for the first time, and it is also the first time to accept the house, so I don't know how to inspect the house, so what to inspect the house?

Is it necessary to inspect a rough house? Let's take a look at the relevant knowledge and process of home inspection.

What is a home inspection?

1. Inspect the wall.

If the renovation of the walls is not done well, it will be worrying in the event of a typhoon. Because the rainwater outside will always seep into the house, bringing certain safety hazards. Therefore, the owner can visit the house before it is handed over and the day after the heavy rain.

2. Check the waterproofing of the kitchen and bathroom.

The waterproofing of the kitchen and bathroom must be done well. The acceptance method is to use cement mortar and other things to block the door of the kitchen and bathroom, seal the drainage outlet tightly, and then put about 2cm of water on the kitchen and bathroom floor. Discuss with the landlord downstairs and check whether there is any water seepage in the ceiling of your kitchen and bathroom after 24.

3. Inspect the pipeline.

Household plumbing is generally a drainage or sewage pipe. At the time of acceptance, water can be poured into the drain to observe whether the water can flow smoothly. In addition, it is also necessary to see whether the sewage pipe has a water storage and anti-odor elbow.

4. Test the horizon.

The ground level test measures the horizontal error between the indoor ground farthest from the doorway and the ground inside the doorway. Generally speaking, a difference in the ground level of 2 to 3 centimeters is an acceptable range, and once it is beyond this range, it is necessary to communicate with the person in charge of the construction team.

Is it necessary to inspect a rough house?

It is also necessary to inspect the rough house, because during the construction process, the workers may not deal with some places in place, such as hollowing and cracking of the wall, and the sewer pipe is blocked, and the doors and windows of the house are damaged and scratched. At this time, it is necessary to ask the house inspection company to help check these problems, and it will be more timely to raise them with the property when receiving the house, so as not to wait for the construction party to evacuate and then rectify it will be time-consuming, laborious and costly.

The acceptance of the house suggests that you can learn more about some relevant knowledge, consult with a professional before the house inspection, to ensure that your house can be delivered smoothly, the above is about the house inspection what and the rough house is necessary to inspect the relevant introduction, in the house inspection of this matter, we must pay attention to the relevant acceptance process.

The rough room needs to be inspected, and the wall: tap the wall with your hand to judge whether the wall is empty from the sound. Roof:

Take four or five points from the ground, use a tape measure to measure the height of the house, if the values are inconsistent, it means that the roof is tilted. Pipes: Shake the heating pipe and water pipe vigorously to check whether they are firm, there may be construction waste in the sewer pipe, so open the water valve to see if the drainage is smooth.

What are the acceptance steps of the embryo room?

1. Prepare tools.

Bring some simple tools, a washbasin, or a small bucket: easy to check the floor drain. 1 house inspection hammer: check whether the walls of the house and the air are hollow, and the decoration and inspection tiles are also very good. 5 meter tape measure: Measure the dimensions of the house.

2. Check the water meter, electricity meter, and gas meter.

When handing over the house, the developer has installed the electricity, water and gas meters for us, and before entering the new house, we first check whether the data of these three meters is zero, and check whether the water meter has leakage and the like.

3. Acceptance of the entrance gate.

Nowadays, the entrance doors of family homes are anti-theft doors, and the doors and door frames should be carefully inspected to see if there are dents, paint loss, deformation, etc. At the same time, it is also necessary to open it several times to see if the key is smooth and whether there is noise in opening.

4. Acceptance window.

Check the sealing ring of all windows, including the adhesive strip and the joints between the window frame and the wall, whether there are cracks, whether the filling is full, and whether it is not tight and easy to leak. Whether the hardware such as the handle of the window is damaged or missing, it is necessary to open and close, lock the test, if it is a sliding window, to see whether the guide rail moves smoothly.

5. The wall and ground are hollow.

Check whether there is a hollow drum on the wall and the ground, then you need to use a house inspection hammer, and it is very convenient to check the hollow drum when inspecting the house. You can also pick up a steel bar and cross it in a zigzag shape from top to bottom on the wall, and the sound of the hollow drum will be very special, so you need to use a marker or chalk to make a mark.

6. Cracks in the wall and ground.

Check whether the wall of the room has cracks, peeling, etc., especially pay attention to whether there is water seepage or leakage watermarks, and if there is, be sure to ask the developer to repair it.