Need to find a renovation company for home inspection? Is a home inspection and renovation company r

Much needed as the owners couldn't see a lot of details.

Although the hardcover room is a well-decorated house, and the advertisements that are often advertised are also to move in with your bag, you must not really move in with your bag. Because we can't see the whole process of house decoration, the only thing we can do is to inspect the house before receiving the house to check the quality of the house.

Owner's self-inspection method.

Check the quality of the home.

The overall quality of the house is looked at from several aspects. Check whether there are cracks in the walls, roofs, etc., if you find cracks in the beams, then you should pay attention, especially the cracks and the corners of the wall have a 45° bevel angle or perpendicular to the beams, indicating that there are quality problems in the structure of the house.

The owner can use a professional instrument to detect the inclination to check whether the house is tilted.

Check the flatness of the wall.

To check if the wall is flat, you can measure the wall with a tool, such as a long ruler, to see if the wall and the ground are in straight contact.

Check that the floor is flat.

Use a professional tool to check whether the plane is flat, or you can walk around the room and listen to whether you hear some undulations, if there is a creak, then the floor is uneven.

Check the water, electricity, and gas.

Observe whether the water coming out of the faucet is normal, and whether the sewers and floor drains are unblocked. You can do a 24-hour water storage and discharge experiment to see if there will be water accumulation in the house.

In terms of circuits, the main thing is to see if the switch in the electrical box is firm or not, try the socket and the like, this is best to find a professional to see.

The gas can be measured by the cigarette method to test whether the alarm device is sensitive, whether there is an alarm light and close the intake solenoid valve.

Check the air quality in your room.

As long as it is a renovated house, then there must be some harmful gases, no matter what materials you use, not to mention what materials you can not see in the hardcover room, so when inspecting the house, you must test the air quality to see if there is formaldehyde and other harmful gas residues, if the index exceeds the standard is not able to move in, which is very harmful to health.

Hardcover house inspection project six: check the quality of all products.

Since everything has been installed, there will be a list of products on the contract, which indicates the brand and quantity of the product, and the owner should compare them one by one when receiving the house, and whether the products in it are in line with the contract.

The above are the six important items about hardcover house inspection, as long as you do a good job of checking these important matters, you can easily move in without worries, and properly go to the peak of life.

It is not necessary to find a special home inspector, generally find the engineering department supervisor of the decoration company; If you can't find it, I'll give you the following answers:

1.Whether the ground is flat Whether the wall is cracked and hollow.

2.Door and window tracks and balcony sliding doors, whether the sliding is smooth.

3.Whether there are bump marks on the entrance door (whether there is noise in the opening and closing of the upper and lower, inner and outer top doors).

4.Water supply and drainage are normal (no stagnant water under the faucet) 5Whether the reserved voids are reasonable.

The main home inspection pays attention to these points, and general problems are prone to appear.

Depending on the specific situation, if it is a decoration company for pre-decoration to inspect the house, it may just go through the motions and is not very reliable, but if it is a third-party decoration company to inspect the house, it is still very reliable. They will check it step by step with the corresponding steps.

1. During the inspection, check whether the door body is deformed, scratched, closed tightly and the lock is good, etc., in addition, it is also necessary to pay attention to the large gap between the door leaf and the door frame.

2. During the house inspection, check whether the window glass is scratched, whether the wind brace is missing, whether the sealing strip is intact, and pay attention to whether there are sundries among the hollow office workers, etc., in addition, we should also pay attention to the tightness of the window sash and window frame.

3. When inspecting the house, it is best to look at the wall, and it is best to accept it on the second day after the heavy rain to check whether the wall has cracking or water seepage problems. In addition, pay attention to whether the wall is flat or hollow.

4. During the house inspection, the acceptance of water and electricity is an important link, although the water and electricity facilities in the blank room are not complicated, but also to check whether the material specifications and quality of the circuit meet the national regulations. In the case of waterways, check its drainage, and if it is a sewage pipe, check whether there is an anti-odor elbow.

5. When accepting the house, it is necessary to pay attention to waterproofing, and check whether there are leaking water traces from the ceiling, room, balcony and kitchen and bathroom. If there is, it needs to be re-waterproofed.

It is not possible to find a decoration company only to change the house, first of all, they say that they do not have the quality of the mountain, if it is really a problem with the quality of the house, the things they issue do not have the benefit of the law.

It is best to find a professional to help with a home inspection. If we don't look at the house carefully before buying a house, then when we renovate or move in, trouble will continue to appear. Therefore, in order to protect, between buying a house, you can ask a professional to inspect the house, after all, a professional will be a little more reliable than someone from some decoration companies.

The operation of the professional during the home inspection is as follows: the first step is to measure the wall and floor with a ruler of more than one meter, so as to test the flatness of the floor. In the process of inspection, if there is a mistake, do not be surprised, as long as the error is within the allowable range, it is still acceptable.

If it is exceeded, you have to explain it to the developer after viewing the property.

<> first, the wall acceptance of the balance: the paint acceptance is accepted by visual inspection and hand feel, and the general qualified paint construction effect is smooth and clean, and the paint surface is bright and smooth at the same time. Choose wallpaper to decorate the wall, and the acceptance after decoration mainly depends on whether the wallpaper is smooth and free of bubbles, and at the same time to see whether the wallpaper joint is pasted well.

The wall is paved with ceramic tiles, and the acceptance mainly depends on whether the tiles are empty and drumming, and you can use your hands to knock on the wall to see if there is a crisp sound. Second, ground acceptance: housing acceptance for this part of the wooden floor, mainly to see whether the wooden floor is paved tightly, you can walk back and forth on the floor, listen to the sound of the floor.

The carpet decoration ground is very simple, mainly to see whether the surface of the carpet is smooth and clean after the carpet is paved, and at the same time, it is also necessary to pay attention to whether the carpet decoration is consistent with the home decoration style. The acceptance method of floor tiles and wall tiles is basically the same, mainly to see whether there is a hollow drum in the paving and whether the floor tiles are cocked. Third, hydropower acceptance:

The acceptance of the waterway part is mainly to check the water outlet and drainage of the water pipe. The acceptance of the circuit is mainly to check whether the installation of the electric box and switch box is reasonable, and in the case of power failure, the switch and leakage protector are toggled by hand to check whether the operation is flexible. Fourth, carpentry acceptance:

The acceptance of woodworking engineering is mainly to check whether the opening direction of the wooden door is reasonable, to see whether the cabinet door handle and each lock installation position is correct, and to pay attention to check the firmness of the ceiling.

When decorating a house, every small detail should not be taken lightly, especially when the house is renovated, the owners must carefully and carefully inspect the house. Special attention should be paid to the bathroom and kitchen, which are the two places that are most prone to problems, and many owners may be concerned about itRenovation inspectionI don't know much about it, so I don't know what to pay attention to, so let's talk about the knowledge of decoration inspection here.

One. How do I perform a renovation inspection?

You can fill sinks, sinks, and bathtubs with water and drain them. At this point, you can check the speed of the drain, and for the toilet water check, the drain test must be repeated.

3.Check the kitchen, bathroom, walls, floors, etc. for cutouts. Tip: Use a small rubber mace to hit the tiles casually and listen to the sounds. If the hollowing drum speed is more than 3%, it is an indication of a quality problem.

4.Inspect wood products and paint products. Tip: Carefully observe whether the wood products are deformed, whether the cracks at the joints are severe, whether the hardware installation is firm and firm, whether the paint is flowing and whether the wall covering is cracked in a large area.

5.Double-check corners and hidden areas. Tips: Pay attention to whether there is a waterproof layer on the bathroom door, whether there is rain on the window, whether there are scratches on the switch panel, and whether the installation position of the bathroom hardware is reasonable.

6.Identify good brands and avoid using "fake brands". Make sure to ask the developer for a description of the decoration to understand the buried item and how to use it.

7.When the owner buys the house, the sales staff emphasizes that it is a "well-renovated house" and that the living room is a "beautifully decorated house". Although it seems like it's just a wrong word.

Owners erroneously equate a "well-furnished home" with a "well-renovated home" and thus evade liability.

Two. Precautions for decoration inspection.

1.When inspecting the house, you should use a tape measure to measure the height of the floor, check whether the actual height of the house matches the value of the purchase contract and record the data. If a problem is found during the acceptance process, it is essential to register in a timely manner and contact the developer or property for a solution.

2.Check for hollow drums on walls and floors, and after renovating your house, check if the walls and floors are empty. The method of examination is to hit it with a small hammer with your right hand and listen to the sound of the air.

If it exists, it means that there is a hollowing phenomenon. You should find someone to fix it as soon as possible. If you can't find someone to repair, it will be easy to penetrate the floor during the renovation process, which will make it difficult for neighbors to get married.

If there are cracks in the wall, check the flatness of the wall, if there are water marks on the top surface, exterior walls and other places, make sure to find out the cause as soon as possible.

The above is all about the decoration of the house inspection, I believe that through the article in the house inspection steps, many owners should know where to pay attention, the house inspection is the top priority, so you must not be sloppy. If you want to know more about how wonderful home decoration information, please stay tuned.

In fact, a long time ago, some people in order to save costs to decorate themselves, the house in the later stage of the problem is more, so we try to find a decoration repair company to decorate the house, so that it can be more worry-free, and when there are problems in the follow-up, you can also find them for after-sales service, so for the decoration company to decorate the house, how should we do a good job of acceptance? Today, let me share with you some relevant knowledge about why to decorate a house, to find a decoration company and how to accept the house renovated by a decoration company.

1. Why should you find a decoration company to decorate your house?

1. If we decorate the house by ourselves, it will take up our time and energy, and if we have a job as the owner, it will also affect our work, because decorating the house by ourselves will also increase our workload, and we may not rest well at night, which will affect our life very much. If we choose a renovation company to renovate the house, we will have more time to do other things, and we will also allow ourselves to get a good rest and ensure that we have enough energy.

2. The main problem is that if we decorate the house ourselves, once there is a problem, it is very troublesome for us to repair, and it is easy to damage the structure of the house, if we find a decoration company for maintenance later, it will cost more money, if we start to find a decoration company to decorate the house When we encounter problems, we can negotiate with the decoration company, and they will repair the problems in time, so as to ensure the safety of our house.

Second, how to accept the house decorated by the decoration company.

1. Inspection of door frame and door lock.

It is necessary to carefully check whether the door frame is installed firmly and flat, whether the connection between the door frame and the wall is tightly sealed, and whether there are abnormal burrs, cracks, and damage on the surface of the door frame; Whether the door lock is installed firmly, whether the key insertion and unplugging is smooth, whether the lock cylinder rotates freely, whether the lock tongue expands and contracts in all directions, and whether the position of the lock hole is normal; It can be tested multiple times to ensure that it can be used normally.

2. Hydropower inspection.

Check whether the water and electricity installation is qualified, whether the wires are of standard specifications, check whether there is leakage, and check whether the electric switch is installed correctly.

3. Check the sewer pipes.

Check whether the pipeline is normal, and if there is a blockage problem, ask for rectification in time so as not to affect the subsequent normal life.

The above is for you to share why you want to find a decoration company to decorate the house, how to accept the relevant knowledge of the house decorated by the decoration company, I hope it will help you. If you want to know more about the acceptance of the house, please stay tuned.