How to change the strap of the watch, how to change the strap of the watch

Watch maintenance and repair can refer to the service center of 702] Joy City Office Building, Xidan District, Xicheng District, Beijing to provide Swiss watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch appearance and replacement of damaged parts, and strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

Steel) First of all, look at the arrow on the back of the strap before you are ready to remove it. The strip grain with arrows is removable. Secondly, loosen the handle of the tape remover, put the strap into the slot, and keep the steel of the tape remover aimed at the pinhole, and the steel needle of the tape remover follows the direction indicated by the arrow, then tighten the handle of the tape remover inward, and the steel needle (raw ear) connecting the strap will be ejected, and then use pliers to pull out the raw ear.

During use, be careful not to scratch the strap by using the steel needle, which will have a certain impact on the appearance, and you should also be careful not to scratch your hands. After disassembling the strap to a size suitable for the wrist, it is necessary to connect the strap that is broken into two sections, and after inserting it, the remaining part of the large section can be gently knocked with a hard substance, preferably a gelatinous hard object, which can better avoid scratching the strap. After tapping in, use the tape remover to slightly push the raw ear into the concave and fix it into the raw ear.

Leather must have a tool to replace the watch strap, this tool to remove the strap one end is concave shape, used to remove the ear, the other end is pointed, used to unclog the strap hole. If not, you can also use a flat or small tool instead.

The watch strap has a metal rod-like object called a raw ear. There are two springs at both ends of the lugs, which are the parts used to jam the lugs of the watch. Therefore, when we remove the strap, we only need to use the tool concave end to jam one of the lugs and press down.

The spring is compressed, and the length of the green ear becomes shorter. This allows the strap to be removed.

When installing a new strap, press down on one end of the lug with a tool and snap the other end into the groove of the lug. Aim the holding lug with the groove on the other side and gently retract the tool so that the lug snaps into the groove of the lug. The strap is replaced!

A detailed explanation of how to change the strap of the watch.

Go to the watch stall to change, all kinds, complete variety.

Looking for a watch repairer, it's very cheap.

Precautions for changing the strap

When buying a strap, you must be accurate about the width of the original strap, pay attention to the general interface is flat, the strap is easier to change, if it is a convex or other shape, it may be customized or modified, note that in order to facilitate putting on and taking off, be sure to put the short strap and buckle on the upper side of the table, and put the long section on the lower side, otherwise the one-handed operation will be very awkward.

Precautions for changing watch straps

First, if you want to change the watch, you must ensure a good size, although the watch generally has some general sizes, but not all brands of watch sizes are the same, so we can also directly through the network to inquire in addition to the matching degree of the strap must also take into account the matching degree, or directly buy the original strap, so that it will not be impossible to replace.

Second, before changing the watch belt, you must buy the right tools, although many straps can be replaced with a small tool, but in fact, the watch is not very scratch-resistant, once it is not properly disassembled, scratches may appear on the strap and dial.

Therefore, you must be cautious, and you must also have special tools, at least when disassembling, it is also important to protect the watch in case one accidentally causes the watch to break.

Third, it is not a metal strap or a leather strap, disassembly and installation are not the point, the point is to ensure that the buckle of the watch strap is tightened, so as to avoid loosening, or outbursting.

In particular, the solid strap is connected by screws, so each screw must be checked, especially the position of the connection with the watch, which is more likely to have problems that have been loose and need to be reprocessed, otherwise the watch may fall off.