How to change the strap of an Audemars Piguet watch, it has been several years, where to change it?

Room 2513, 25th Floor, Diwang Building (Shun Hing Plaza), No. 5002 Shennan East Road, Luohu District, Shenzhen, Guangdong Province] will answer for you.

Prepare to disassemble the taper of the watch band.

Invert the handle watch, press the cover on the back of the watch, and insert the upper part of the strap with a tapered shape.

Once the strap floats, quickly replace the strap with the old one (the other end is replaced in the same way).

The awl continues to be inserted, and then replaced with a new strap in your hand, note: the strap hole must be aligned, and it is gently tapped with the awl to fix.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

Audemars Piguet watch straps can be changed as long as they are in a regular after-sales center, and if you like leather straps, then it is best to have at least two or more leather straps. This allows for the replacement of a strap that can be worn for a long time and can be hardened or smelled when soaked with sweat, and it is not recommended to wear a strap in summer.

The location of the Audemars Piguet watch strap replacement is in Room 918, 9th Floor, Landmark Plaza, Nanjing East Road Pedestrian Street, Huangpu District, Shanghai, the metal strap is sturdy, has a long life cycle, does not need to be replaced for a long time, and will not be stuffy or hot, to some extent waterproof, and not easy to bump and cause scratches.

It is still recommended that you send it to a professional and large clock point for replacement.

Or it is recommended that you can open the warranty copy attached to the purchase table, under normal circumstances, the warranty copy will have a service address**What can be called**Consult the nearest maintenance point to you**You can also replace.

1) ** Strap: ** expensive, meticulous workmanship, very luxurious. It is suitable for high-quality watches and jewelry watches, etc., and is worn on special occasions.

2) Steel chain strap: **Moderate, complete high-end and high-grade goods. Its advantages are durable, rough and heroic, and sporty. Some of the main disadvantages** will cause allergies, the strap is not easy to clean, and it is easy to hide dirt and dirt.

3) Leather straps: There are quite a lot of variety, and the price difference is also very different. There are crocodile skins, lizard skins, ostrich skins, cowhides, sheepskins, etc.

Newer leather straps: devil's skin, water snake skin. An elegant watch must be paired with a top-quality leather strap to show off the overall elegance.

Comfort is its advantage. The main disadvantages are susceptibility to moisture, difficult maintenance, and non-durability is its fatal injury.

4) Canvas or nylon strap: **Cheap, mainly used for military watches, sports watches. It will absorb water and is prone to peculiar smell.

5) Plastic strap: **The cheapest, mainly with electronic fashion watches. The pattern design is diverse and colorful, but there is a feeling that it has not grown up yet.

6) Silicone rubber straps: gradually favored by watch dealers. It is mainly used for waterproof and diver's watches, and its use will become more and more widespread in the future. Silicone rubber has excellent physical properties: non-toxic, high and low temperature resistance, acid and alkali resistance, elasticity, and easy maintenance.

It is recommended to send it to the after-sales service center for testing and repair.

The difference between the leather strap and the metal strap of the watch is: different advantages, different disadvantages, and different extractions.

First, the advantages are different.

1. Leather strap: The leather strap has better breathability, is very soft and comfortable.

2. Metal strap: The metal strap has good sturdiness, good wear resistance, high surface abrasion resistance and decoration.

Second, the disadvantages are different.

1. Leather strap: The leather strap is easy to wear and be corroded by body fluids, and is more fragile and easy to break than metal straps.

2. Metal strap: Metal straps have poor air permeability, are easy to wear and tear**, have heavier weight, and are not flexible.

Third, the picking is different.

1. Leather strap: The leather strap has no studs, so it is not easy to return and take off.

2. Metal strap: The metal strap has a spike, which is easy to buckle and difficult to remove.

The service center provides Audemars Piguet watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, Audemars Piguet watch exterior parts damage replacement, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

We use the most advanced ultrasonic non-marking welding repair technology, which is both beautiful and strong, and does not damage the surface coating.

Treatment method of epidermal rupture:

1. Pull out the watch handle and let the watch stop.

2. How to deal with the crackage of the watch? You must not dial the hands or adjust the calendar quickly.

3. The watch should be placed flat (preferably with the watch mask facing down), and the watch should be placed flat until it is sent to the watch repair shop.

4. Do not do violent vibration and shaking during this period.

5. Instruct the watch repair shop to be careful not to let the glass chips hurt the dial and watch hands during disassembly and repair.

Summary. Hello, Baume & Mercier is a famous watch brand from Switzerland, its watch straps are usually made of high-quality leather or metal materials, which are very durable. If you need to replace or purchase a Piser watch strap, there are several ways to consider:

1.Pisa Certified Repair Service: If your watch needs to be serviced or repaired, you can contact the Pisa Certified Service Center, who can provide you with an original strap replacement service.

2.Swiss Watch Brand Boutique: Some Swiss watch brand stores can also offer watch strap replacement services, you can visit your local Swiss watch brand boutique.

It should be noted that different series of Pisai watches may use different strap specifications and interfaces, so you need to pay attention to choosing the strap that suits your watch when purchasing to avoid incompatibility.

Hello, Baume & Mercier is a famous watch brand from Switzerland, its watch straps are usually made of high-quality leather or metal materials, which are very durable. If you need to replace or buy a Piser watch strap, you can consider the following ways:1

Pisa Certified Repair Service: If your watch needs to be serviced or repaired, you can contact the Pisa Certified Service Center, who can provide you with an original strap replacement service. 2.

Swiss watch brand stores: Some stores specializing in Swiss watch brands can also provide watch strap replacement services, Zheng Shouqing can go to the local Swiss watch brand store for consultation. 3.

**Purchase: Some e-commerce platforms or watch accessories** can also quietly buy Pisai watch straps, but you need to pay attention to choosing regular merchants to ensure that you buy** goods. It should be noted that different series of Pisai watches may use different strap specifications and interfaces, so you need to pay attention to choosing the strap that suits your watch when purchasing to avoid incompatibility.

I buy it at the e-commerce.

It can be purchased on JD.com, ** and other platforms, guaranteed, it is not recommended to buy on live broadcast platforms, there is no guarantee**.

Watch strap replacement (broken)?

Steel) First of all, look at the arrow on the back of the strap before you are ready to remove it. The strip grain with arrows is removable. Secondly, loosen the handle of the tape remover, put the strap into the slot, and keep the steel of the tape remover aimed at the pinhole, and the steel needle of the tape remover follows the direction indicated by the arrow, then tighten the handle of the tape remover inward, and the steel needle (raw ear) connecting the strap will be ejected, and then use pliers to pull out the raw ear.

During use, be careful not to scratch the strap by using the steel needle, which will have a certain impact on the appearance, and you should also be careful not to scratch your hands. After disassembling the strap to a size suitable for the wrist, it is necessary to connect the strap that is broken into two sections, and after inserting it, the remaining part of the large section can be gently knocked with a hard substance, preferably a gelatinous hard object, which can better avoid scratching the strap. After tapping in, use the tape remover to slightly push the raw ear into the concave and fix it into the raw ear.

Leather must have a tool to replace the watch strap, this tool to remove the strap one end is concave shape, used to remove the ear, the other end is pointed, used to unclog the strap hole. If not, you can also use a flat or small tool instead.

The watch strap has a metal rod-like object called a raw ear. There are two springs at both ends of the lugs, which are the parts used to jam the lugs of the watch. Therefore, when we remove the strap, we only need to use the tool concave end to jam one of the lugs and press down.

The spring is compressed, and the length of the green ear becomes shorter. This allows the strap to be removed.

When installing a new strap, press down on one end of the lug with a tool and snap the other end into the groove of the lug. Aim the holding lug with the groove on the other side and gently retract the tool so that the lug snaps into the groove of the lug. The strap is replaced!

Generally speaking, choose the strap you want to give to the master is better, during the warranty period, you can also send it directly to the counter for maintenance, or it is recommended that you can open the warranty copy attached to the purchase of the watch, under normal circumstances, the warranty copy will have a service address**or something, so you can also call**consultation the nearest maintenance point to you, and then decide what the cost is under the consultation.

If the watch strap is broken, you can take the watch directly to the after-sales center for repair, if you prefer leather straps, then it is best to have at least two leather straps. This can be replaced, to avoid wearing a strap for a long time due to sweat and the hardening or odor problems, and it is not recommended to wear a belt in summer, metal straps and leather watches have the same disadvantage, that is, they are afraid of water. Since water vapor can cause air oxidation of the watch bracelet of surface metal materials, it is very easy to fade especially if it is a karat gold material.

A: What's your watch? Quartz or mechanical? Domestic or foreign? Generally, large brands have their own after-sales service points, and the movement is guaranteed within 3 years, and those who do not have a service point can take it to the general watch store for maintenance, hoping to help you.

The strap is broken, you can find it on the **, there is a specially customized strap, as long as you send the old strap to him, he will make a new one according to your original model, almost the same.

Generally, large brands have their own after-sales service points, within 3 years of the movement warranty, no service points can be taken to the general watch shop for maintenance, I hope to help you Answer: What kind of watch is yours? Quartz or mechanical?

Domestic or foreign? Generally, big brands have their own after-sales service points, within 3 years of the movement warranty, there is no service point can be taken to the general watch shop for maintenance, I hope to help you, haha, take a look.

If you don't have an after-sales service store, it's good to find a place to repair your watch

Hello, glad to answer for you.

First of all, prepare a meter adjuster and small pliers, preferably a small hammer and 502 glue to hold it in place.

1. Before preparing to disassemble the strap, please look at the arrow on the back of the strap, the arrow is detachable. If the arrow is broken, you can only change the strap.

2. Unscrew the handle of the gauge adjuster, put the strap into the gauge slot, and keep the steel of the tape remover aiming at the pinhole. Be sure to insert it in the direction of the scissor head.

3. The steel needle of the meter adjuster follows the direction indicated by the arrow, and then the handle of the tape remover is tightened inward, and the bearing connecting the strap will be ejected, and the whole process must ensure that the steel needle is perpendicular to the watch strap. If the bearing breaks inside, it will be very uncomfortable (hehe).

Use pliers to pull out the raw ears. Be gentle and forceful.

Go to a specialty store or watch repair shop.

In general, all-steel watches do not rust, but everything is relative. There are many types of stainless steel. If the sweat discharged by the human body contains hydrochloric acid, if the watch is eroded by sweat for a long time or allowed to accumulate acid and alkali salt dirt without wiping it off, the case will slowly appear rust spots, especially in the low recess of the back cover.

Therefore, you should pay attention to the maintenance of your watch and often wipe off the dust and sweat on the case. In addition, try to avoid wearing the watch on occasions such as strong acids and alkalis, so that the all-steel case will not appear rusty.

The maintenance center is located in Room 05, 24th Floor, SAC Sichuan Aviation Plaza, No. 6 Renmin East Road, Jinjiang District, Chengdu, Tel: 4000562678].

When choosing a maintenance point, users of this kind of expensive watch must choose a regular and professional maintenance point, so as not to bring losses to themselves and the watch, and the most important point is that the cost of different models of the same watch is also different, it is recommended to consult in detail.

It is recommended to send it to the after-sales service center for testing and repair.

Mechanical watches generally need to be serviced once every 3 years or so.

Common sense of mechanical watch maintenance:

1. When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is nickel-chromium alloy, the corrosion resistance is better, the semi-steel case is copper, long-term contact with sweat, easy to corrode, should often wipe off the sweat with a soft cloth or pad the plastic watch holder to prevent it from being eroded by sweat.

2. Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3. Do not put the watch in the wardrobe with mothballs to avoid the deterioration of the watch oil.

4. Do not put the watch on the radio or TV to avoid magnetization.

5. Watches that are not worn for a long time should be wound regularly once a month so that the parts will not be in a static state for a long time, so as to ensure the operation performance of the watch machine.