How to wash and care for cold proof clothing and overalls

Updated on vogue 2024-07-24
6 answers
  1. Anonymous users2024-02-13

    Oil is insoluble in water, and to wash off the oil, detergents must be used, that is, surfactants, which are oil-water amphiphilic substances. If there are oil stains on your clothes, you can try to remove them with the "Blue Moon Dry Precoat Method".

    1.When the clothes are dry, apply the original solution of laundry detergent to the stains;

    2.Do not wash immediately after application, let it sit for 5 minutes to allow the detergent to react with the stain, and then gently scrub.

    3.You can use Blue Moon Hand Wash special laundry detergent, the original solution can be directly pre-coated, effectively removing oil stains, fruit stains and other stains, leaving no traces and no residual odor.

    If it is still difficult to remove the stain after the above methods, please use color bleaching and collar net to solve it:

    Wring out the clothes, put them in the basin, stick the stain to the bottom of the basin, use the blue moon color drift bottle cap to measure the color bleaching and collar net 1 4 bottle caps (10 grams each), pour it on the stain, make the stain soaked, and cover it with other parts of the clothing (to prevent the stain from drying out).

    Step 2: Let stand for 2 hours and rinse well.

    If the stain remains unremoved after 2 hours, it can be left on for an extended period of time overnight.

  2. Anonymous users2024-02-12

    If it is a normal oil stain, it is enough to use dish soap (wash it with dish soap first, and then wash it with laundry detergent or other laundry products);

    If it is an industrial engine oil, it may require special treatment and trouble. It is recommended to choose anti-acid and alkali, oil-stain-proof work clothes, cold-proof clothing, and it's OK.

  3. Anonymous users2024-02-11

    Washing method of cotton overalls:

    1. Good alkali and heat resistance, can be used with various detergents, can be washed by hand and machine, but should not be chlorine bleached; 2. White cotton overalls can be washed at high temperature with alkaline detergent to play a bleaching effect;

    3. Do not soak cotton overalls and wash them in time;

    4. It should be dried in the shade, avoid exposure to the sun, so as not to fade the dark cotton overalls, and face the inside outward when drying in the sun;

    5. Cotton overalls are washed separately from other clothes;

    6. The soaking time should not be too long to avoid fading;

    7. Cotton overalls should not be wrung out.

    Maintenance method of cotton overalls:

    1. Cotton overalls should not be exposed to the sun for a long time, so as not to reduce the fastness and cause fading and yellowing;

    2. Wash and dry, dark and light color separate;

    3. Pay attention to ventilation and avoid dampness to avoid mold;

    4. Cotton overalls should not be soaked in hot water to avoid yellow sweat spots.

  4. Anonymous users2024-02-10

    It is best to wash it by hand, after washing it can be spun dry in a washing machine, iron it with an iron while it is damp, and dry it in a hanger, so that one will be wrinkled.

  5. Anonymous users2024-02-09

    Workwear should be washed as follows:

    1. The amount of each washing should not exceed 2 3 of the coarse grinding of the washing capacity. For some dirty work clothes, the laundry worker must wash them by hand before they can be washed in the washing machine.

    2. Put the dirty work clothes into the washing machine, add an appropriate amount of laundry detergent, and cover the washing machine. Turn on the power, turn on the faucet switch, turn on the machine, set the washing program, and start the laundry.

    3. After the first dehydration stool is filled with water, lift the lid of the washing machine, add 1 bottle (500ml) of lysol (cresol soap) solution, continue to rinse twice, and finally dehydrate and spin dry. Unplug the mains after use, turn off the faucet, and hang the drain on the hook on the side of the washing machine.

    4. After the clothes are washed and dried, they must be sent to the drying room to dry. Fold neatly, if there is damage, it should be repaired (the same cloth should not be used for repair). The work clothes of the general area and the 100,000-level district are packed in different clean plastic bags according to the department and number, and sent back to the corresponding areas of each department for storage in time.

  6. Anonymous users2024-02-08

    1. Check whether the cleaning of the washer and dryer is within the expiration date before operation.

    2. Put the clean clothes of ** into the washing machine (up to 10 sets of washing each time), add laundry detergent, and start the washing machine in accordance with the "Standard Operating Procedures for Washing Machines".

    3. Put the dried clean clothes into the dryer and dry them in accordance with the "Standard Operating Procedures for Dryers".

    Dry clothes are numbered and put in a bag for later use.

    4. Soak the clean shoes with purified water first, and then scrub them with a shoe brush, and the stains that are not easy to remove are properly brushed with detergent, and then rinsed with purified water.

    5. Brush clean shoes, spray them with disinfectant, and hang them upside down on the sandal rack to dry. After drying, the clean shoes are put into the corresponding shoe cabinet according to the number, and the clean shoes to be cleaned are replaced.

    6. Fill in the "work clothes and shoes cleaning and distribution record".

    7. After the operation, clean the laundry room in accordance with the "Standard Operating Procedures for Cleaning Uniforms in Clean Area", and fill in the "Cleaning and Distribution Record of Work Clothes and Shoes".

Related questions
11 answers2024-07-24

Why is it so difficult to do business now, I have done sales for 3 companies, and I feel that the products are not easy to sell." >>>More

8 answers2024-07-24

Several key points in the design of tooling and workwear In addition to a few expensive workwear, such as specific ceremonial clothing and special clothing, most of them require it to have a reasonable performance ratio, that is, compared with the design of the fabric grade, style complexity, process production difficulty, etc. >>>More

13 answers2024-07-24

Choose the same fabric as the texture fabric of the workwear (you can find a manufacturer who makes workwear for your company), cut it into squares of the same size (enough to write the number), and then embroider the number you need with the thread, and sew it on the workwear.

11 answers2024-07-24

Nowadays, many companies in society will require employees to wear custom-made uniforms, but the general style of uniforms is relatively ordinary, and some people who love beauty are unwilling to wear them. But why is it mandatory to wear work uniforms? >>>More

12 answers2024-07-24

Hotel clothing customization should be determined according to the different positions to determine the style, before this to determine the hotel's publicity positioning, publicity of the main color, logo, etc., around these to choose styles, fabrics, such as the competent administrative needs of professional business suits, front desk, chefs, room service staff, catering service personnel, security guards, doormen and other standardized and practical clothing models, high recognition, mainly to highlight the image of the hotel.