How to renovate the cement floor of an old house simply? Do you know?

Introduction: Some people want to renovate the cement in their hometown, which also requires skill. Refurbishment is actually very simple, and you must look at what kind of materials are better when you buy them.

Everyone knows that there is a difference between cement and flooring, for example, when you mop the floor, it will be very troublesome, because it can't be dragged at all, and the cement is relatively rough. <>

When you find that there are cracks in the cement, you should not dislike the project at this time, you should take a look at what should be used. If you don't understand, you can also take a look at what you can transform this house into, if it has been dusted, or there has been an old phenomenon, you should also carry out a good repair, don't think that you are a rented house, you get better, then you will feel very warm and feel when you live. If the old house is of interest in preservation, then it will also leave a lot of good memories.

If you don't want to spend too much work, then you have to choose a reasonable response. If you want to deal with it well, first of all, you should also let yourself have some suggestions, such as the old house will have a lot of hidden dangers when renovating, then you also have to decide how much you can spend. There is no way to reinforce the prefabricated slabs on some old houses if they are broken, so it is necessary to renovate the cement wall when it is time to renovate, which is also a phenomenon that you can deal with well.

Many people are confused when it comes to getting a house, so in the meantime you have to tell yourself. Many people have lived in the old house of the family when they were young, but they can also build a villa for themselves when they have money. Every money has to be put to use, you can also sign some guarantee services with them, so that the decoration is not only very easy, but you don't have to care so much, the renovation of the wall is actually very time-consuming and labor-intensive, so you must also stick to it in time, and do not let the floor leak.

Be sure to clean the ground of the old house first, and then wet the cement in one direction, but it is more difficult to do this alone, you can find some professional people to help you renovate, there must be order and regularity; As I know, renovating a concrete floor is relatively simple, as long as you use the right method, you can renovate it as quickly as possible.

You can choose to lay tiles or wooden floors on the cement floor, which is relatively implementable, and you can also choose to lay floor leather, which can save the cost of decoration.

You can smooth out the uneven cement floor of the old house with cement, or add some cement mortar to the cracked place, and the renovation is very simple.

Post-sanding curing is the easiest.

It is easiest to renovate the cement floor of an old house by mechanical grinding and reinforcement. During the construction, a professional floor grinding machine is used, with a diamond coarse grinding disc, to polish the cement floor of the old house many times, so as to remove the loose hemp aggregate on its surface, and let the cement floor expose the smooth and solid concrete inside.

Prepare an appropriate amount of concrete curing agent, clean up all the dust on the surface after exposing the concrete, and directly splash the curing agent on the ground, so that the cement floor can fully absorb the curing agent until saturated, which can increase the strength of the cement floor and avoid sand and ash on the cement floor. After the curing agent is completely dry, select a relatively fine grinding disc according to the demand, continue to polish the ground, remove the rough scratches on the surface and the residual curing agent, and restore it to a smooth and clean appearance.

When the cement floor of the old house is damaged or seriously textured, you can also use special machinery to treat its surface to increase its roughness, and then remove the surface pollution and loose cement, and then use a high-pressure water gun to wash the ground all the way, and finally scrape a thin layer of mortar on the surface of the ground to repair the original opposite side and restore it to a smooth appearance.

When the cement floor of the old house is seriously damaged, it can not be renovated with the above two methods, and the best renovation method is to remove all the cement floor, and after the construction waste is cleaned up, the new cement will be directly poured on the ground, and it will be smoothed with tools. The renovated cement floor should be sprinkled with a layer of clean water for maintenance to prevent the new cement floor from cracking again, this renovation method is costly, and the need is relatively long, but the renovation effect is also the best one among all renovation methods. When renovating the cement floor, you can choose the most suitable renovation method according to the degree of damage to it, and if there is a condition, it will be better to directly transform it into a tile floor.

Before coating, we must clean the surface of the cement, the surface of the cement, not to have any dust, and other rooms, if cracking, we had better use a sealing curing agent, all the places that have been opened, and then use epoxy, this situation will appear epoxy flooring.

The cement can be dug up, then laid with tiles, and then brushed with cement, which is the best renovation effect and very strong.

If it is an old house and you want to renovate it, I think the easiest way is to put floor tiles on the ground, which is the easiest and fastest way.

Cement floors are more common in life, but they are prone to sand or cracking over time, and need to be renovated. So, how to renovate the old cement floor indoors?

How to renovate the old cement floor in the <> room Grinder polish the ground to make its surface smooth and remove concrete aggregates. Then sprinkle a curing agent on the sanded ground to increase its strength and prevent the appearance of dirt or sand. Then select the corresponding grinding plate and continue grinding.

Finally, remove any remaining hardener from the ground. When curing the cement floor, in case of rain or when the maintenance water is sufficient, you can choose to cover and cure with moisturizing film, sack or geotextile, but you can not choose to use water-saving methods.

Smear-style decoration: When it comes to decoration,"Flush type"Just a foundation, because the cement floor of the old house was washed clean, equal"Male"The defect is also equal to"Smear"Laid the foundation. Steps:

After the cement floor is cleaned, quickly sprinkle a layer of cement powder before the water dries, and sweep the cement powder evenly to every corner of the ground with a broom, so that the cement powder will be on the ground"Pinholes"Fill in, replace the cement powder and do a light treatment with a tool after fully wetting!

Note: The ground must be cleaned, without oil and dust, so as not to affect the viscosity of the cement. After sprinkling the cement powder, be sure to clean it evenly with a broom, because this can enhance the adhesion of the cement powder to the ground.

When cleaning cement powder, we must pay attention to the humidity of the ground. If it's too dry, we can sprinkle a little more water. When pressing, we must wait for the cement powder to wet before drying to a suitable degree.

When pressing, we can make the ground smooth or rough according to the actual use of it! In the process of curing the ground, it is also necessary to pay attention to the issue of time, which must be determined according to the growth rate of the compressive strength of the ground. And this strength can not be less than 80% of the design strength, and for the first 7 days of maintenance to pay special attention, must do a good job of moisture-proof and thermal insulation.

First, first of all, the method of renovation of cement floor.

1. The concrete floor has been renovated into a concrete floor.

This type of renovation has become one of the most popular and economical alternatives to the renovation of old concrete slabs. The original cement of the floor is ground and restored, then the curing agent sealing concrete is sprayed to seal the concrete in the capillary holes, and at the same time the hardness, wear resistance and brightness of the concrete are increased, and finally the old concrete floor becomes a concrete penetrating floor with a luster similar to marble. After the transformation, the ground not only gets rid of sand, dust, oil, cracks and other common diseases of the floor of ordinary cement, but is also protected from dust, easy to clean, hardness increases and has a longer resistance to soil wear and life.

2. The cement floor is renovated into a polyurethane floor.

Flooring polyurethane has become the first choice for industrial and commercial applications because of its rich colors, abrasion resistance, pressure resistance, waterproofing, anti-corrosion, sterile, clean and convenient.

3. The cement floor is renovated into a wear-resistant floor.

Wear-resistant flooring is divided into flat wear-resistant metal flooring and wear-resistant non-metallic flooring. Due to its smooth surface, abrasion resistance, scratch resistance, good gloss and rich color, it has become one of the preferred places for many processing fields, automobile manufacturing, parking lots, workshops and storage load bending attitudes. The construction methods include:

First grind the floor with original cement mill, shot peening, etc., then pour in a certain thickness of fine stone concrete, then pick up the light propagation wear-resistant addition and finally polish.

Second, the cement floor renovation process.

1.Treatment of hydrocarbon-contaminated soils.

Use a blade to remove dirt; Special scrubbing degreaser to remove oil, degreasing, degreasing, degreasing, 2-5 times in a row; After a day, disinfect again.

2.Construction treatment of the void of the concrete floor.

First, the cement floor is ground with a sander;

Remove the concrete floor with a shovel and a hollow drum;

the use of high-strength cement or epoxy mortar to repair and repair the bottom hole crack floor;

The structure is carried out according to the conventional resin coating process.

3.Pothole treatment for cement floor renovation.

First, the cement floor is ground with a sander;

Remove the concrete floor with a shovel and a hollow drum;

repair the bottom of the well with high-strength cement or epoxy mortar;

The structure is carried out according to the conventional resin coating process.

Hello, glad to answer for you. How to renovate the old cement floor of the old house Brother Zheng curing and renovating the old cement floor Polishing the original cement floor, repairing the cracked places, and spraying some concrete sealing and curing agents. All the original old cement was removed, and the surface was changed to concrete penetration level.

Wild Attack Clean up the surface of the cement and apply epoxy directly.