What is the best plastic floor for cement flooring, and how to lay the floor on cement floor?

When it comes to the best of PVC plastic flooring, you can learn about Beijing Youshang Anaibao Building Materials, Beijing Youshang Anaibao Building Materials is a comprehensive strength of strong productive enterprises, sports treasure - professional sports flooring brand, Anaibao - commercial plastic flooring, well-known brand, yoso Youshang - professional production of dance floor brand, Hasbro - professional children's flooring brand, factory direct sales, covers an area of more than 50 acres, 10 large-scale PVC flooring production lines, complete products, A professional team of 300 people, 11 offices across the country, more convenient and thoughtful service, 7 days no reason to return and exchange, 24-hour after-sales service, professional installation workers, can be installed nationwide, self-provided trucks, self-provided drivers, spot issued within 12 hours, 520,000 square meters of inventory spot, welcome to call **** inquiry, consultation**: 400675....

Generally, the regular site is to do a good job of cement surface first, then paste the wooden floor, and finally put plastic rubber on it, if you use cement floor, one is not elastic, and when you jump up and land, there will be a recoil force, not shockproof, the cement floor is slightly better, but it is not anti-slip after a long time, the best thing is to add rubber on it, so that it is elastic and shock-absorbing, and non-slip, because badminton often has to stop urgently, the kind your mother sees is the plastic sheet, which can be put away.

Kiss! Hello, happy to answer your <>

How to lay the floor on the cement floor is as follows: 1. Clean the dust and dirt on the original cement floor.

2. Wet the cement floor. 3. Prepare the cement mortar according to the correct modulation ratio, and it needs to be stirred evenly. 4. Use a scraper to lay the prepared cement mortar on the cement floor, and the surface of the cement mortar must be kept flat.

5. Lay the floor tiles on the cement mortar. 6. Use a rubber hammer to vibrate the floor tiles, and in the process of compaction, the strength should not be too large, otherwise it is easy to cause the floor tiles to crack. 7. Set up the floor tiles at one time according to the correct order.

Once you've finished laying it, just wait for the tiles to dry naturally. Hope mine can help you <>

Do you have any other questions?

The materials commonly used for flooring are solid wood flooring, multi-layer solid wood flooring, laminate flooring and laminate flooring.

1.Hardwood flooring: Hardwood flooring is made from a single piece of wood with natural textures and colors and a long lifespan. However, it is relatively high, requires high technical requirements for installation, and is not easy to clean and maintain.

2.Multi-layer solid wood flooring: Multi-layer solid wood flooring is made of two or more boards of different materials, which can effectively prevent the deformation of the floor and improve stability.

Compared with the solid cracked Sanga wood floor, the ** of multi-layer solid wood floor is slightly lower, but the solid wood layer on its surface is only a few millimeters thick, so the service life is shorter.

3.Laminate flooring: Laminate flooring is composed of a central particleboard and a thin wood board on the surface, which can imitate various wood grain effects, and is cheaper than solid wood flooring and multi-layer solid wood flooring. However, its service life is short, and it is prone to curling and cracking during use.

4.Laminate flooring: Laminate flooring consists of four layers, and the surface is protected by a layer of reed-digging plastic film, which is well resistant to abrasion and scratching.

Laminate flooring is more economical and easy to install than other kinds of flooring, but it also has the problem of relatively short service life.

Therefore, the choice of flooring materials should be comprehensively considered according to individual needs, such as appearance, service life, environmental protection, etc. Among them, solid wood flooring and multi-layer solid wood flooring are the best choices with higher quality and better quality, while composite flooring and laminate flooring have the characteristics of relatively low and easy maintenance.

Now plastic flooring is a commonly used decoration material in decoration, and its use is becoming more and more extensive. Nowadays, many owners will install plastic flooring in their home decoration, but they will be used in installationPlastic flooring glue。The corrosion resistance and wear-resistant characteristics of plastic flooring are deeply loved by people, so do you know what is good for plastic flooring glue and installation steps and precautions?

1. What is the best use of plastic floor adhesive?

1. What glue is used for adhesive plastic flooring, which is to choose according to the place and environment where it is used, and also to choose according to the type of flooring. It is better if you use PVC sheet flooring, use water-based sheet glue, and use water-based membrane glue if you use PVC membrane flooring.

2. If it is in an ordinary area, the general water-based glue is fine, and if it is in a water-related place, it is necessary to use two-component epoxy resin glue. Different floor thickness and physical properties, the choice of glue is also different, the stability of the floor is poor, you need to choose a strong adhesive glue with high cost, and the floor stability is good, but you can choose ordinary glue.

2. What are the installation steps of plastic flooring?

1. The laying ground must be flat and clean. Before the PVC plastic floor is laid, it must be tiled on the laying ground 24 or more in advance, and the site temperature should not be lower than 15. After the floor is restored, 5cm more should be left at both ends when cutting.

Before pasting, the floor is rolled up in reverse about halfway, and then the squeegee is laid – starting in the middle – with a toothed scraper.

2. Arrange according to the numbering order of the floor, align and merge, and pay attention to aligning the site line during the paving process. Turn over the two adjacent floors along the joint, place the special connecting belt matched by the manufacturer on the lower side of the joint, brush the glue on the surface of the connecting belt, first stick one of the plates to half of the connecting belt, and then glue the other half to the remaining connecting belt, and close the gap closely.

3. It is recommended to use water-soluble glue that is harmless to the human body for construction. When pasting the floor, use cork blocks to squeeze the surface of the floor from the middle to both ends to make it smooth without leaving bubbles, and roll it thoroughly and flattening. After the floor is laid and glued, slotting and welding are carried out, and the welding wire should be flattened after welding.

3. Plastic flooring glue - matters that need to be paid attention to when installing plastic flooring.

1. For the two adjacent rooms to lay different colors and patterns of plastic flooring, the separating rubber barrier should be outside the door frame stepping line, so that the door floor is symmetrical.

2. When paving, use a rubber to knock from the middle to the surroundings to drive away the bubbles. No one is allowed to go up for 3 days after paving.

3. PVC floor membrane should be cut 3 to 6 days before paving, and leave a margin, because the plastic has a certain shrinkage after cutting.

Plastic flooring glue is the installation of this material paving materials, the same glue, is also the owner of the more concerned issue. The above content introduces what is good for plastic flooring glue and the installation and precautions of plastic flooring. For the glue used for plastic flooring, it is best to use special glue Liang Tanghu, because the floor needs to be used for a long time, and the quality of the glue selected cannot be too bad.

The materials for laying the floor are:1Hardwood flooring:

Made of natural wood, it has a natural texture and color, and the texture is good, but **high. 2.Laminate flooring:

It is composed of multiple layers of material, and the surface is covered with a layer of wood sheets, which has the appearance and texture of a solid wood floor, but is relatively low. 3.Laminate flooring:

It is composed of high-density fiberboard and a thin wood texture layer, and the surface is covered with a wear-resistant layer, which has the characteristics of waterproof, moisture-proof, fireproof, etc., and is moderate. Flooring: Made of polyvinyl chloride, it has the characteristics of waterproof, moisture-proof, fireproof, etc., **low.

5.Tile floor: Made of ceramic trembling material, it has the characteristics of waterproof, moisture-proof, and easy to clean, but the texture of cave dates is hard, which is not suitable for standing for a long time.

6.Carpet: It is made of fibrous materials, which has the characteristics of warmth and sound absorption, but it is easy to hide dirt and dirt, and it is not easy to clean.