What should I do if the glass glue used around the kitchen sink is blackened?

What should I do if the bathroom glass glue is moldy and black?

1. Wash the mold.

Ordinary mold can be cleaned with soap and steel wool balls, and when possible, you can use an electric toothbrush with a discarded brush head. When you can brush it off, if you want to be lazy, you can use mold removal gel, and if you can't buy it, you can use toilet cleaner, 84 disinfectant, bleach, and the active ingredients are sodium hypochlorite (bleaching effect).

Toilet cleaner and 84 disinfectant cannot be mixed, one detergent can be used alone.

2. Anti-mildew sticker.

This is a new way to use professional anti-mold and waterproof stickers to put up the corners and crevices of the walls. There is a crease in the middle, and the effect of pasting is very conforming, so you don't have to worry about warping, and it is also very easy to paste, and you can do it at home. White is versatile and can be used on almost all tiles and countertops.

3. Alcohol. In addition, the nail polish remover that we girls often use can actually clean moldy glass glue like alcohol. Or buy some caustic soda, dilute it with water, apply it to the moldy area, and wait for a while to clean it.

Finally, a little white cement or plastic steel mud can be laid on the glass glue after cleaning, and this situation will not occur in the later stage.

How to choose high-quality glass glue.

1. Anti-mildew. Glass glue is generally used in wet areas such as kitchens and bathrooms, mildew is the key, and the general glass glue packaging will be remarked with anti-mildew effect, if the quality is not good, it will not be remarked.

2. Curing effect.

The curing effect is the most direct reaction of glass glue. The glass glue cures quickly, the color is pure, there will be no cracks, there will be no fine particles, and the elasticity can be clearly felt when pulling it. On the contrary, the glass glue with poor quality has little elasticity, is easy to break when pulled, the color is not pure, and there will be small particles, the most obvious is that the curing time is slow or can not be cured at all.

Understanding the difference in performanceSome people bought glass glue without knowing the product knowledge, and found many problems in the process of using it. The places where glass glue is generally used in home decoration are: the dumb place on the back of the wood line, sanitary ware, toilet, makeup mirror in the bathroom, the gap between the sink and the wall, etc., these places should use glass glue with different properties.

1. Use a hair dryer to blow the hot air, dry the mold, wash it with dish soap, and then dry it.

It took a lot of effort to get the pool down and reinstall it.

3. On a layer of glass glue, you can shovel off the blackened part first, shovel as much as you can, and apply another layer to cover it.

The glass glue is mildew and black, this is because the glass glue is an organic matter, the glass glue in the bathroom will have many molds and other microorganisms growing on the surface and gaps of the glass glue due to the moisture of the water, and after a long time, the mold will be covered with the outside and cracks of the glass glue and turn black, and at the same time, the mold will absorb more dirt and bacteria, and eventually aging and falling off, which cannot be completely removed.

It is best to re-glue and choose a mold-resistant sealant.

Clean him up with a blade or something, and reapply *** glue.

Clean off with a razor blade and reseal the glass glue.

Blade cleaning Re-glue. Buy gum that doesn't get moldy!

Generally, it is to get moldy, shovel it, and then buy the mildew-proof glass white glass glue and then beat it. du1, laundry detergent with a rag to wipe it.

DAO2, just mix 84 disinfectant with blisters, like a new one-yuan belt, specializing in decontamination products.

3. Dip it in the powder and brush vigorously.

4. Wipe the laundry detergent with a sasafras ball.

5. Oxalic acid is good for soaking.

The scraped glass glue is particularly disgusting and black, but after scraping off the glass glue, you will find that the edge of the sink is still quite clean, that is, the glass glue is too damp and the environment is very suitable for mold growth, so it will become mildew and black.

Generally, if it is moldy, shovel it, and then buy that mildew-proof glass glue and then hit it.

1. Wipe the laundry detergent with a rag. 2. Use 84 disinfectant to mix blisters on the line, like a new one-yuan belt, specializing in decontamination products. 3. Dip it in the powder and brush vigorously.

4. Wipe the laundry detergent with a sasafras ball. 5. Oxalic acid is good for soaking.

The glass glue is moldy and black, this is because the glass glue is an organic matter, the glass glue in the bathroom due to the moisture of the water, there will be many molds and other microorganisms growing on the surface and gaps of the glass glue, for a long time, the mold will be covered with the outside of the glass glue and the gaps and turn black, at the same time, the mold will absorb more dirt and bacteria, the ultimate aging and falling off, can not be completely removed, it is best to re-glue, choose mildew-proof sealant.

Sealant sealing glue is a sealing material that deforms with the shape of the sealing surface, is not easy to flow, and has a certain degree of adhesion. It is an adhesive used to fill the gap in the configuration and act as a seal. It has the functions of anti-leakage, waterproof, anti-vibration, sound insulation, heat insulation, etc.

It is usually made of dry or non-dry viscous materials such as asphalt, natural resin or synthetic resin, natural rubber or synthetic rubber as the base material, with inert fillers such as talc, clay, carbon black, titanium dioxide and asbestos, and then added plasticizers, solvents, curing agents, accelerators, etc.

It can be divided into three categories: elastic sealants, liquid sealing gaskets and sealing putty.

It is widely used in the sealing of construction, transportation, electronic instruments and components.